Sunnydaze Decor TLA-828 User manual

05/2023 Page 1 / 3
INDOOR/OUTDOOR ALL-WEATHER
FOLDABLE BAR TABLE
TLA-828
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

 
Tabletop 1
Metal Tube 1
Weight-Mounted Threaded Rod 1
Leg Base 1
M10 Nut (installed on threaded rod) 2
M10 Lock Nut (installed on threaded rod) 1
Washer (installed on threaded rod) 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
(not included)
17mm Combination Wrench
 — This item contains
small parts that can be swallowed. Keep
children and pets away during assembly.
WARNING
Tabletop folds down
for easy storage!
100
pounds
45 kg
Weight Capacity

05/2023 Page 2 / 3
STEP 3
Ensure components are tightly tted, with grooves and
notches fully aligned.
On the underside of the leg base, place the Washer on
the Threaded Rod. With the at side down, securely
fasten the M10 Lock Nut onto the treaded rod.
STEP 4
Secure the tabletop by inserting the pin into the folding
mechanism, as shown.
STEP 2
Close the folding mechanism and nish tightening the
M10 Nut.
Remove the M10 Lock Nut and Washer from the short
side of the Weight-Mounted Threaded Rod.
Slide the Metal Tube over the Weight-Mounted Threaded
Rod, ensuring the groove in the tube is aligned with
the notch on the folding mechanism.
Place the leg base onto the metal tube, ensuring
the groove and notch align, as shown.
IMPORTANT: Lock nuts must be
installed with the nylon insert on the outside.
Tools must be used to fully tighten lock nuts,
failure to properly tighten the lock nuts may
result in product malfunction or personal injury.
Nylon
Insert
ASSEMBLY
Read carefully and understand assembly before beginning.
Fasten hardware equally and tightly - failure to do so may cause table to crack and break.
STEP 1
Lay the Tabletop face-down on a smooth, clean surface.
Remove the pin. Press the lever on the folding mechanism
and ip it open.
Remove one M10 Nut from the long side of the Weight-
Mounted Threaded Rod. Place the nut on the inside of
the folding mechanism, as shown in the 1st picture.
Screw the long threaded rod into the nut until it is ush
with the nut in the folding mechanism. Tighten the outside
nut, as shown in 2nd picture.
M10 Nut

05/2023 Page 3 / 3
Care & Maintenance
Cleaning
Do not use harsh chemicals or abrasive materials to clean the table.
Mix mild soap with warm water and wash the table using a soft cloth. Thoroughly rinse soap
residue off the table. Dry with a soft, lint-free cloth.
O NOT USE BLEACH 
SAFE USE: Never sit or stand on the table.
INSPECT: Periodically check assembly points and tighten hardware as necessary.
: When not in use, covering the table with a breathable cover will help protect it from
the harmful e󰀨ects of sunlight, dust build-up, and collecting debris.
: Protect this item from inclement weather, especially ice and
snow. Move the table to a cool, dry indoor location. Cover the table while in storage to help
prevent dust build-up.
SAFETY STATEMENTS & WARNINGS
• Do not exceed the weight capacity of the furniture.
• Do not sit or stand on the table.
• Inspect hardware often, tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
• Do not use a pressure washer to clean the furniture.

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.