Sunnydaze Decor 4-LEAF CLOVER-SHAPED GALVANIZED STEEL RAISED GARDEN... User manual

714494 09/2023
4-LEAF CLOVER-SHAPED GALVANIZED
STEEL RAISED GARDEN BED
Review all care and assembly information carefully before using this product. Save this manual for future reference.

Page 1 / 3
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
  
ASide Panel 8
BCorner 4
CM6x10mm Bolt 60
DWing Nut 60
CAUTION:
SHARP EDGES
USE EXTREME CAUTION
◄ WEAR GLOVES DURING ASSEMBLY ►
 (not included)
Phillips Screwdriver

714494 09/2023 Page 2 / 3
Align two Side Panels (A).
Insert Bolt (C) through the outside edges of the panels
and loosely secure by hand-tightening Wing Nuts (D).
Repeat to connect three more sets of side panels.
HELPFUL HINTS
• 

• 
• 
ASSEMBLY
CAUTION: 
Align one Corner (B) with the left side of one of the
assembled panel sets.
Insert Bolt (C) through the outside edges of the panels
and loosely secure by hand-tightening Wing Nuts (D).
Repeat to connect the three remaining corners to the
side panel sets.
Align the four sets of panels and
loosely fasten each section using
the remaining Bolts (C) and Wing
Nuts (D), as shown.
After all sections have been loosely
fastened, nish tightening all sixty
sets of hardware.
STEP 1
A: 8
C: 20
D: 20
STEP 2
B: 4
C: 20
D: 20
STEP 3
C: 20
D: 20

714494 09/2023 Page 3 / 3
USE & CARE
• This garden bed provides ergonomic access to plants and can eliminate the need to till the soil each year as
long as the soil is not packed down. Avoid stepping inside the bed!
• Prepare the site before installation. Level the ground and remove existing vegetation. Landscaping fabric
can be used under the beds; a double layer is recommended for beds placed directly on a lawn.
• A layer of gravel or stone can be used at the bottom for improved drainage.
• Loosely hand-tighten all nuts and bolt sets first, position the bed, then tighten. After assembly, check that all
fastening points are fully secured.
• Galvanized metal beds do not require maintenance and are built to withstand years of exposure to outdoor
elements.
• The galvanized finish protects the steel from corrosion. Over time, galvanized steel will fade, and some
discoloration is normal. Minor surface rust on edges and hardware is to be expected and should not affect
the structural integrity of the product.
• Wear gloves during assembly to prevent personal injury.
• Do not stand on, or lean objects against the bed wall. Doing so may damage the product.
• Do not let children play in or around the garden bed.
• Using this item for applications other than gardening will void the product warranty.
SAFETY STATEMENTS & WARNINGS

If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage

