Sunnydaze Decor HB-774 User manual

RAISED METAL PLANTER BOX
WITH MESH SHELF
Read the assembly instructions carefully and follow the care instructions. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging any surfaces.
G2453A Page 1 / 5
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
ALeg 8
BShelf 2
CSide Panel 4
DEnd Panel 4
EBottom Panel 2
FM6x15mm Bolt Set 68
GM6x20mm Bolt Set 12
WARNING
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
(not included)
Phillips Screwdriver
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully, and assembling the item soon after purchase. Check that
all parts are accounted for and familiarize yourself with the assembly before beginning.
Save this manual for future reference.
11/2021

Wrench
CONFIGURATIONS

Page 2 / 5
STEP 1 (x2) STEP 2 (x2)
A: 2
F: 4
A: 2
B: 1
F: 2
G:2
STEP 3 (x2)
D: 1
G:4
STEP 4 (x2)
C: 2
D: 1
F: 12
G2453A 11/2021
 Placement of Bolt Sets G as noted during individual assembly is recommended but not

easier to identify the bolts needed to connect the separate units.
IMPORTANT
Select your preferred conguration before beginning assembly; individual, long, wide.
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.
ASSEMBLY -- INDIVIDUAL
STEP 5 (x2)
E: 1
F: 16
Fully tighten all hardware
after this step is complete.

Page 3 / 5G2453A 11/2021
ASSEMBLY -- LONG
STEP 1 (x2)
A: 2
B: 1
F: 4
STEP 3 (x2)
C: 2
D: 1
F: 12
STEP 2 (x2)
A: 2
F: 2
STEP 4
D: 2
G:6
STEP 5
E: 2
F: 32
Fully tighten all hardware
after this step is complete.
Repeat this step for the opposite side of the planter box. Repeat this step for the opposite side of the planter box.
Repeat this step for the opposite side of the planter box.
 There will be extra Bolt Sets (G) when
assembling in this conguration.

Page 4 / 5G2453A 11/2021
ASSEMBLY -- WIDE
STEP 1 (x2)
A: 2
B: 1
F: 4
STEP 3 (x2)
C: 1
D: 2
F: 12
STEP 2 (x2)
A: 2
F: 2
STEP 4
C: 2
G:6
STEP 5
E: 2
F: 32
Fully tighten all hardware after this step is complete.
 Assistance is recommended
to secure the side panels.
Repeat this step for the opposite side of the planter box. Repeat this step for the opposite side of the planter box.
Repeat this step for the opposite side of the planter box.
 There will be extra
Bolt Sets (G) when assembling
in this conguration.

HELPFUL HINT: Lining the planter box with landscaping fabric is recommended. Lining the planter box can
help insulate the soil against extreme temperatures, help retain soil moisture, prevent soil from escaping through the
bottom, and could help maintain the overall appearance of the garden bed.
Page 5 / 5
Care & Maintenance
LEVEL SURFACE: Select a at, level surface to place the raised planter boxes before lling and using it.
       Periodically check all nuts and bolts and tighten as necessary.
MOVING: Only move the unit(s) when the planter box is empty; remove soil if necessary. Do not drag the
garden bed as doing so may weaken assembly points and could cause breakage.
CLEANING: Wipe surfaces with a soft cloth.
For stubborn dirt, use a mixture of soap and water and wash with a soft cloth. Rinse all soap residue with a
garden hose. Dry with a soft cloth to prevent rust on hardware and at assembly points.
 Maintain the appearance and prevent damage by emptying and storing indoors when not in use.
 The powder coating is tough and durable, but some scratching is inevitable. To prevent rust,
wipe scratched areas to remove moisture. Scratches can be repaired with rust-resistant paint (not included);
consult an expert at your local hardware store.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
G2453A 11/2021
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, OR TOUCH-UP PAINT.
• Do not exceed the weight capacity of the planter box or shelf.
• Do not sit, stand, or climb on any part of the unit(s).
• Inspect hardware often and tighten loose hardware as needed.
• Keep furniture a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Do not use harsh chemicals or abrasive materials to clean this unit.
SAFETY STATEMENTS & WARNINGS
