Sunnydaze Decor LAM-474 User manual

Page 1 / 2
PICKET FENCE STYLE PLANTER BOX
LAM-474
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

HELPFUL HINT
This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Left untreated, the wood will weather to a silvery gray color.
07/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
CHOKING HAZARD — This item contains small parts that
can be swallowed. Keep children away during assembly.
WARNING
LY453
  
ASide Panel 2
BEnd Panel 2
CBottom Panel 1
DJCBC 60mm Bolt 8
EBarrel Nut 8
FHex Key 1
GBarrel Nut Driver 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.


Page 2 / 2
1. Lay 2x Side Panel (B) face-
down on a clean, soft surface.
2. With the slotted end facing
upward, place 4x Barrel Nut
(E) into each side panel. Use
Barrel Nut Driver (G) to turn the
barrel nut so the threaded hole
aligns with the pre-drilled hole.
3. Align End Panel (B) with Side
Panel (C). Loosely secure
by hand-tightening 2x JCBC
60mm Bolt (D).
4. Repeat step 3 until all side and
end panels are loosely secured.
5. Carefully place Bottom Panel
(C) into the assembled box.
6. Tighten all bolts using Hex Key
(F).
NOTE: Do not fully tighten any bolt 
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


07/2020LY453
A
D
E
B
F
G
C
ASSEMBLY
USE & CARE
INS PECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft cloth.
MAINTENANCE:This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a
year, or when the wood looks particularly dry. Follow application instructions as noted with the suitable wood
oil (not included).
STORAGE: Protect this item from ice and snow. Store indoors, in a dry location. Covering the unit while in
storage will help prevent dust buildup.