Sunnydaze Decor DSL-260 User manual

DECORATIVE
WOODEN WINDMILL
DSL-260
Read the assembly instructions carefully and follow the care instructions.
Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching

DSL-8903 Page 1 / 2
  
A
Tower
1
BFront Blade 1
CBack Blade 1
DShaft 1
  
EBolt (8x110mm) 1
FWasher 2
GNut 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
NOTE:
Wood is a natural product. Some checking (splits in the wood) is a normal feature of wooden products.
Checking is part of what gives wood furniture a true rustic appearance.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
06/2020
• CHOKING HAZARD - This item contains small parts that can be swallowed by children. Keep children
away during assembly.
• This is not a toy. For decoration only.

SAFETY STATEMENTS & WARNINGS

DSL-8903 Page 2 / 2
TROUBLESHOOTING
Why don't the blades spin?
• Make sure the windmill is on a flat, level surface.
• Check to make sure the hardware is not over-tightened.
• Make sure the blades are facing the correct direction.
• The blades are designed to spin slowly, do not force or alter the blade assembly as this may damage the product.
INSTALLATION
 :Select a at, level surface to display the windmill. Sloped and uneven surfaces may cause the
windmill to tip over and break.
:Consider anchoring the windmill to prevent it from being blown over during highly windy conditions.
Example: insert long stakes (not included) into the ground and place the windmill over the stakes.
CARE
The nished appearance of the wood is the result of the surface being lightly burned with re. Over time, the windmill will
mellow in color; this is part of the natural aging process.
:Follow the woodgrain with a soft brush or cloth to remove dust, dirt and debris. Do not use chemicals or
abrasive materials as they will damage the wood.
:Maintain the appearance and prevent damage by storing this item indoors during inclement weather.
• High winds may cause the windmill to tip over and/or break the blades.
• Wood expands when wet and contracts when it dries. Repeated and excessive exposure to moisture, rain or snow
can cause damage to the product. Resulting damage includes, but is not limited to, pre-assembled components
separating, wood cracking, mold and mildew growth, and hardware rust.
• Bring the windmill inside before freezing temperatures. Freezing can cause moisture to become trapped in the wood
which may lead to unwanted cracking, pre-assemble components separating, as well as mold and mildew growth.
ASSEMBLY
STEP 1 STEP 2
Place Front Blade (B) onto Back Blade (C) as shown.
Slide Bolt (E) through the blades, Washer (F), Shaft
(D), Washer (F), and Nut (G). Hand-tighten the bolt.
Do not over-tighten the hardware.
Thread the bolt into the top of Tower (A).
NOTE: the blade assembly is designed to spin gently, do not force
spinning or alter the assembly as it may damage the product.
06/2020
