Sunnydaze Decor RAISED WOODEN GARDEN BED PLANTER BOX WITH... User manual

RAISED WOODEN GARDEN BED
PLANTER BOX WITH SHELF
Read the assembly instructions carefully and follow the care instructions. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging any surfaces.
DSL-9905 Page 1 / 3
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
A
Top Bottom
Leg 4
B
Top Bottom
Corner Brace 4
C
Top Bottom
Shelf 1
D
Top Bottom
Side Panel 2
E
Top Bottom
End Panel 2
FTop Bottom Bottom Panel 3
G
Top Bottom
M6x40mm Bolt Set 12
H
Top Bottom
Screw 28
(not included)
Phillips Screwdriver 10mm Wrench
WARNING
 — This item contains small parts that
can be swallowed. Keep children away during assembly.
09/2021

DSL-9905 Page 2 / 3
ASSEMBLY
STEP 1 STEP 2
B: 4
G: 8
A: 4
C: 1
G: 4
STEP 3 STEP 4
E: 2
D: 2
H: 12
Attach 4x Leg (A) to Shelf (C) by hand-tightening 4x
M6x40mm Bolt Set (G), as shown.
Do not over-tighten hardware.
Align the bottom hole of Corner Brace (B) with the
outside of Leg (A). Secure by hand-tigtening 2x Bolt
Set (G). Repeat to connect remaining corner braces.
Do not over-tighten hardware.
Ensuring the lipped edges on the bottom, align Side
Panel (D) with End Panel (E) and rmly secure using
3x Screw (H). Repeat until planter box frame is
assembled.
Do not over-tighten hardware.
Place the assembled
planter box inside the
corner braces, on top
of the garden box legs.
09/2021
NOTE:
The bottom of
Corner Brace (B) has
less spacing between
the pre-drilled holes.


DSL-9905 Page 2 / 3
STEP 5 STEP 6
F: 3H: 16
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or
indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
Secure the planter box by tightening 4x Screw (H)
into the top holes in each corner brace.
Place 3x Bottom Panel (F) into the planter box.
Firmly tighten all hardware using a screwdriver and
wrench, tool not included.
Do not over-tighten the hardware as it may cause wood to crack.
Care & Maintenance
:Select a at, level surface to place this item before lling and using it.
I N S P E CT: Periodically check all bolts and screws and tighten as necessary.
MOVING: Do not move the garden bed while it is full or in use. When empty, and with assistance of another person, lift
beneath the side panels of the planter box. Do not drag the garden bed as doing so will weaken assembly points and
could cause breakage.
:Follow the woodgrain with a soft brush or cloth to remove dust, dirt and debris. Do not use chemicals or
abrasive materials as they will damage the wood and/or nish.
:Maintain the appearance and prevent damage by emptying and storing this item indoors when not in use.
Wood expands when wet and contracts when it dries. Repeated and excessive exposure to moisture, rain or snow can
cause damage to the product. Resulting damage includes, but is not limited to, assembly points becoming loose, wood
cracking, mold and mildew growth, and hardware rust.
HELPFUL HINT
Lining the planter box with landscaping fabric is recommended. Lining the planter box can help insulate the soil against
extreme temperatures, help retain soil moisture, prevent soil from escaping through the bottom, and could help maintain
the appearance of the wood.
09/2021