Sunricher SR-2803B Reference manual




 
 
• SR-2803B/CisRFWirelessCCTDimmer.
• SR-2803Bletyouindividuallycontrolupto6differentzonesindependentlyorinagroup.
• SR-2803B,dimWWandCWassociatively,forexampleifWWis70%,CWis30%.Dim6zones
separatelyorsynchronously.
• SR-2803C,dimWWandCWassociatively,forexampleifWWis60%,CWis40%.1zone.save6
colortemperature.
• Pushdimfunction

    
SR-2803B 3VDC 868MHz 39x136.5x10.7 BatteryCR2025
SR-2803C 3VDC 868MHz 39x136.5x10.7 BatteryCR2025
    
SR-2501M 12-36VDC 4x5A 4x(60-180)W Constantvoltage
SR-2501MEA 12-36VDC 4x8A 4x(96-288)W Constantvoltage
SR-2502M 12-36VDC 4x350mA 4x(4.2-12.6)W Constantcurrent
SR-2503M 12-36VDC 4x350mA 4x(8.4-25.2)W Constantcurrent

SR-2803B SR-2803C

 

 

 
ON/OFFbutton
ControlCW  ControlWW
TurnUpyourselectedzones’receives’(4channelstogether)LEDlights
TurnDownyourselectedzones’receives’(4channelstogether)LEDlights
123456Sixzones


AfteryouhavewiredallthereceiversaccordingtoFigureillustrationyouneedtodothefollow-
ing:
Pullofftheplasticlmcoverofthebatteryatthebackofremote.
Ifyouusemultiplereceivers,youhave2choices:
HaveallreceiversinthesamezonelikeZone1forexample
Haveeachreceiverinadifferentzone,likeZone1,2,3andsoon
InorderforeachreceivertoknowwhatZoneitbelongsto,youwillneedto“pair”ittothezone
youwishtouse:shortpresstheLearningKeyonthereceiver,andimmediatelyshortpressthe
zonenumber(1-6)whichyouwishtouse(forexample ).
Onceyoudothat,theLEDlightswillblinkonce.Nowyourremoteandreceiverarepaired!
Dothesamefortheotherreceiversifyouusethem.
Thiswirelessreceivercanworkinanyofthe6zones.Ithasaspecial“LearningKey”thatwill
enableyoutopairittoanyofthe6zonesinthewirelessremotecontrol.Youcanaddasmany
optionalreceiversasyouwish,tocreateupto6differentcontrolzones.Eachzonecanhavean
endlessnumberofreceivers.

Incaseyouwanttoresetthememoryofthereceiver,pressthelearningfunctionbuttonfor10
secondswhiletheunitisbeingpowered.Theunitwillthenresettofactorydefaults.

Reassigningthereceivertoadifferentzoneiseasy,justrepeatStep3asabove.
buttontoturnON/OFFallzones’LEDlights.
Longpressthezonenumberfor3secondstoturnOFFthatzoneseparately(forexample ),and
youcanturnitONonlybylongpressthatzonenumberagain,butNotthepowerbutton.
AfterIDlearningbetweenremoteandreceiver,pressthezonenumber(forexample )toselect
thezoneyouwanttocontrol.
RegardingSR-2803Csavingcolortemperature,rstchooseCCTyoulike,shortpress ,thelight
willbeblink,itmeansyousavethisCCTto ,thenyoualsocansaveother5CCTtoS2-S6.Just
pressS1-S6,canrecall6CCTyousavedseparately.
Note: If the max brightness is set by , then, you can not turn UP beyond that max
brightness by .
 
ON/OFFbutton
ControlCW  ControlWW
TurnUpyourselectedzones’receives’(4channelstogether)LEDlights
TurnDownyourselectedzones’receives’(4channelstogether)LEDlights
Savesixcolortemperature

1. Theproductshallbeinstalledandservicedbyaqualiedperson.
2. IP20.Pleaseavoidthesunandrain.Wheninstalledoutdoors,pleaseensureitismountedina
waterproofenclosure.
3. Alwaysbesuretomountthisunitinanareawithproperventilationtoavoidoverheating.
4. PleasecheckiftheoutputvoltageofanyLEDpowersuppliesusedcomplywiththeworkingvolt-
ageoftheproduct.
5. Neverconnectanycableswhilepowerisonandalwaysassurecorrectconnectionstoavoidshort
circuitsbeforeswitchingon.
6. Pleaseensurethatthecableissecuredtightlyintheconnector
7. Forupdateinformationpleaseconsultyoursupplier.