Sunricher SR-2833N-Z5 User manual

RF Wireless LED Dimmer
Feature
Reliable stable switch and dimming control function,control range≥20M.
Battery in the remote is with long life span. It normally can use for 2 years.
Dimming range 0.1-100%.
Model:SR-2833N-Z5 with SR-1009FA series
Use with power repeater to expand the output power unlimitedly.
Enable to control 5 zones separately, And dim or ON/OFF 5 zones at same time ,each zone can be set endless
receivers, each receiver maximally be controlled by 8 different remotes.
Parameter
Switch on/off of lightings slowly, without any flash, meet the comfort of human eyes.
Remote
Receiver
Product Size
Enable be dimmed and ON/OFF by push button after connecting receivers.
Receivers can work with RF-WIFI converter after installing software on IOS and Android system.
Part No. Input Voltage Remarks
Current
SR-1009FA 12-36VDC Constant voltage
4x(60-180)W
4x5A
Output
SR-1009EA 12-36VDC Constant voltage
4x(96-288)W4x8A
SR-1009FA3 12-36VDC Constant current
4x(4.2-12.6)W
4x350mA
SR-1009FA7 12-36VDC Constant current
4x(8.4-25.2)W4x700mA
Part No. Operation Voltage DIMENSIONS
ø/h (mm)
Operation
Frequency
SR-2833N-Z5 3VDC 38.6x150x12
916.635MHz
REMARKS
RF Wireless
Wiring diagram
150.00 mm
38.60 mm
12.00 mm
Power Supply
12-36VDC
LN
110V-230VAC
whi te
SR-1009FA
LED CO NTROLLER
1234
Lea rnin g Key
whi te
SR-1009FA
LED CO NTROLLER
1234
Lea rnin g Key
whi te
SR-1009FA
LED CO NTROLLER
1234
Lea rnin g Key
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Operation
After you have wired all the receivers according to Figure illustration you need to do the following:
1. Pull off the plastic film cover of the battery at the back of remote.
2. If you use multiple receivers, you have 2 choices:
Have all receivers in the same zone like Zone 1 for example or
Have each receiver in a different zone, like Zone 1, 2, 3 and so on
3. In order for each receiver to know what Zone it belongs to, you will need to “pair” it to the zone you wish to
use: short press the Learning Key on the receiver, then immediately short press the or from the zone you
wish to use (for example ON/Off from zone 1). Once you do that, the LED lights will blink once. Now your remote
and receiver are paired!
4. Do the same for the other receivers if you use them.
This wireless receiver can work in any of the 5 zones. It has a special “Learning Key” that is in the unit that will
enable you to pair it to any of the 5 zones in the wireless remote control. You can add as many optional
receivers as you wish, to create up to 5 different control zones. Each zone can have an endless number of
receivers, which will let you escalate any installation from small to super-size.
5

Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Brief introduction of buttons
All lights :on/up
All lights :off/down
Zone 1 :off/downZone 1 :on/up
Zone 2 :off/downZone 2 :on/up
Zone 3 :off/downZone 3 :on/up
Zone 4 :off/downZone 4 :on/up
Zone 5 :off/downZone 5 :on/up

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.