Sunrise Medical QUICKIE Sedeo Pro User manual
Instrucons for Use
Manuel d’ulisaon
Gebruikershandleiding
Sedeo Pro
000690790.02
Seating manual
Manuel d‘utilisation du système d‘assise
Handleiding zitting
2Sedeo Pro Rev.B
03
UK
Wheelchair Components
We at SUNRISE MEDICAL have been awarded the ISO-13485 cercate, which arms the quality of our products at every stage,
from R & D to producon. This products meet the requirements in accordance with EC guidelines. Opons or accessories shown are
available at extra cost.
EN
Description du fauteuil
Nous, la société SUNRISE, sommes cerés ISO 13485, ce qui garant la qualité de nos produits à tous les stades, du développement
jusqu'à la producon. Ce produit est conforme aux direcves de la Communauté européenne. Les opons ou accessoires illustrés
sont disponibles en opon.
FR
Rolstoelonderdelen
SUNRISE MEDICAL hee het ISO 13485 cercaat toegekend gekregen, een bewijs van de kwaliteit van onze processen in elk
stadium, vanaf het onderzoek en de ontwikkeling tot de produce. Deze producten voldoen aan de eisen in overeenstemming met
de EG-richtlijnen. Getoonde opes en accessoires zijn tegen betaling verkrijgbaar.
NL
42
FR
81
NL
3Sedeo Pro Rev.B
ENGLISH
Dealer signature and stamp
If you have any queries about the use, maintenance or safety of your
seang system, please contact your local approved Sunrise Medical
service agent. If you do not know of an approved dealer in your area
or have any other quesons please write or telephone:
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD
England
Phone: 0845 605 66 88
Fax: 0845 605 66 89
www.SunriseMedical.co.uk
4Sedeo Pro Rev.B
ENGLISH
Contents
1.0 User informaon.................................................5
1.1 This user manual .................................................... 5
1.2 Forfurtherinformaon.......................................... 5
1.3 Symbols used in this manual.................................. 5
2.0 Safety.................................................................6
2.1 Seangrelatedsymbolsandlabelsusedonthe
product ................................................................... 6
2.2 Safety: Temperature ............................................... 6
2.3 Safety:Movingparts............................................... 6
2.4 Safety:Chokinghazard ........................................... 6
2.5 Safety: Trays............................................................ 7
3.0 General descripon.............................................7
4.0 Seng up the seang system..............................8
4.1 Pre-set seat depth .................................................. 8
4.2 Pre-set seat width................................................... 9
4.3 Pre-set backrest.................................................... 10
4.4 Pre-setFlipbackarmrests/Singlepostremovable
armrests................................................................ 12
4.5 Pre-setRecliningipbackarmrests ..................... 15
4.6 Sideguard............................................................ 16
4.7 Pre-setsinglepostSEDEOLitearmrests .............. 16
4.8 Pre-setcentermountlegrest ............................... 17
4.9 Pre-setFixedcentermountlegrest...................... 18
4.10 Pre-setpowercentermountlegrest.................... 19
4.11 Pre-setswingawaylegrests ................................. 20
4.12 Pre-set headrest ................................................... 21
4.13 Pre-setxed/swingawaycontrollerbracket...... 22
4.14 Pre-setthighsupport ........................................... 23
4.15 Pre-set laterals...................................................... 24
4.16 Pre-setlateralswingawaykneesupport ............. 25
4.17 Pre-set pommel .................................................... 25
4.18 Lapstrap/seangposioningbelt...................... 26
5.0 Using the seang system...................................27
5.1 Genginandoutofthewheelchair
(Transferring) ........................................................ 27
5.2 Preparingforforwardtransfer ............................. 27
5.3 Preparingforsidetransfer ................................... 28
5.4 Headrest ............................................................... 29
5.5 Swing-awaycontrollerbracket............................. 29
5.6 Laterals(Fig5.11) ................................................. 29
5.7 Kneesupport(Fig5.12)........................................ 30
5.8 Thighsupport(Fig.5.13) ...................................... 30
5.9 Hemiplegiaarmrest(Fig5.14).............................. 30
5.10 Pushhandleheight(Fig5.15)............................... 30
5.11 Pommel(Fig5.16)................................................ 30
6.0 Manual and Powered seang opons ...............31
6.1 Manualseangopons...................................... 31
6.2 (Powered)seangopons ................................... 32
7.0 Reducing the seang system size for transportaon
purposes...........................................................33
7.1 Seat cushion ......................................................... 33
7.2 Removingthebackcushion(Fig7.3) ................... 33
7.3 Flipdownbackrestquickrelease(Fig7.4)........... 34
7.4 Foldingdownbackrestwithrecliningarmrests
(Fig7.5)................................................................. 34
7.5 Foldingdownrecliningbackrestwithreclining
armrests(Fig7.6).................................................. 34
7.6 Swingawaylegrests(Fig7.7)................................ 35
7.7 Singlepostremovablearmrest ............................ 35
8.0 Maintenance and cleaning ................................36
8.1 General Maintenance........................................... 36
8.2 Cleaningyourseangsystem............................... 36
8.3 Hygienemeasureswhenbeingre-used:.............. 36
8.4 Generalcleaninginstrucons: ............................. 37
8.5 CleaningAccessories:........................................... 37
8.6 Cleaningcontrols:................................................. 37
8.7 Storage.................................................................. 37
9.0 Technical specicaons: ...................................38
9.1 Applicablenorms/standards .............................. 38
9.2 Technicalspecicaons:
SEDEOProseangsystem ................................... 39
10.0 Guarantee / Warranty.......................................41
5Sedeo Pro Rev.B
ENGLISH
1.0 User informaon
Thank you for choosing a Sunrise Medical wheelchair. Sunrise
Medical’s high-quality mobility products are designed to enhance
independence and make your everyday life easier.
1.1 This user manual
This user manual will help you to use and maintain your seang
system safely. This seang manual is a supplement to Sunrise
Medical’s general wheelchair user manual:
• The general wheelchair user manual
• The user manual for the seang system (this booklet)
• The user manual for the controller.
When necessary this Seang user manual refers to other manuals as
shown below:
& General manual: Refers to the general user manual
for the wheelchair.
& Controller: Refers to the user manual for the
controller.
& Baery charger: Refers to the user manual for the
baery charger.
Do not use your wheelchair unl this enre manual (and all other
booklets) has been read and understood!
If one of the user manuals was not included with your wheelchair,
please contact your dealer immediately. In addion to this user
manual, there is also a service manual for qualied specialists.
1.2 For further informaon
Please contact your local, authorized Sunrise Medical dealer if you
have any quesons regarding the use, maintenance or safety of your
wheelchair. In case there is no authorized dealer in your area or you
have any quesons, contact Sunrise Medical either in wring or by
telephone.
For informaon about product safety noces and product recalls, go to
www.SunriseMedical.eu
1.3 Symbols used in this manual
DANGER/WARNING!
Potenal risk of injury or serious injury or death
NOTE/CAUTION!
Potenal damage to equipment.
Not following these instrucons may result in physical injury, damage
to the product or damage to the environment!
If you are visually impaired,
this document can be viewed
in PDF format at
www.SunriseMedical.com
or alternavely is available on
request in large text.
Fig. 1.1
AB FG
D
CE
6Sedeo Pro Rev.B
ENGLISH
2.0 Safety
Follow the instrucons carefully next to these warning symbols! Not
paying careful aenon to these instrucons could result in physical
injury or damage to the wheelchair or the environment. Wherever
possible, safety informaon is provided in the relevant chapter.
2.1 Seang related symbols and labels used on the product
The signs, symbols and instrucons axed to the wheelchair
comprise part of the safety facilies. They must never be covered or
removed. They must remain present and clearly legible throughout
the enre lifespan of the wheelchair.
Replace or repair all illegible or damaged signs, symbols and
instrucons immediately. Please contact your dealer for assistance.
Fig 2.1: Warning – Danger of nger entrapment
Fig 2.2: Warning – Ensure that the seat interface quick release is
screwed in ght before using your wheelchair, especially on
a slope
Fig 2.3: Warning – Do not drive your wheelchair on a slope with the
backrest reclined and/or the seang in standing mode
2.2 Safety: Temperature
DANGER! / WARNING!
• Avoid physical contact with the wheelchair’s motors at all mes.
Motors are connuously in moon during use and can reach high
temperatures. Aer use, the motors will cool down slowly. Physical
contact could cause burns. Allow the motors aer using at least 30
min. to cool down.
• If you do not use the wheelchair, ensure that it is not exposed
to direct sunlight for lengthy periods of me. Certain parts of
the wheelchair, such as the seat, the back and the armrests can
become hot if they have been exposed to full sunlight for too long.
This may cause burns or allergic reacons to the skin.
2.3 Safety: Moving parts
DANGER! / WARNING!
A wheelchair has moving and rotang parts. Contact with moving
parts may result in serious physical injury or damage to the
wheelchair. Contact with the moving parts of the wheelchair should
be avoided.
• Wheels (turning and castor)
• Powered lt in space adjustment
• Powered seat elevator opon
• Powered recline adjustment
• Swing-away bracket of the controller
2.4 Safety: Choking hazard
DANGER! / WARNING!
This mobility aid uses small parts which under certain circumstances
may present a choking hazard to young children.
Fig. 2.1
Fig. 2.3
Fig. 2.2
7Sedeo Pro Rev.B
ENGLISH
Fig. 3.1
2.5 Safety: Trays
Safety: Vent tray
DANGER! / WARNING!
Using a vent tray will aect the stability and overall weight of your
wheelchair.
• Make sure that the baeries and the venlator are securely
fastened to the tray before use.
• Familiarise yourself with the increased size of the wheelchair before
driving to prevent potenal collisions.
• When acvang the recline backrest make sure that the area
around the vent tray is clear.
• Be aware that the vent tray assembly can cause a nger trap hazard
when the backrest is reclined.
• The vent tray is not designed to hold anything other than the vent
unit and its baeries, it is not designed to hold an oxygen bole
etc. Use of these items may cause your wheelchair to become
unstable.
• The vent tray must be installed and maintained by a Sunrise
Medical authorised dealer.
Safety: Swing away tray:
DANGER! / WARNING!
• The maximum weight allowed for the tray is 2.5kg.
• Do not overload the tray, this could cause the tray to break or could
cause the chair to become unstable.
• Do not leave lit cigarees or other heat sources on the tray as this
could cause the tray to deform and mark.
• Ensure that all extremies and clothing are clear when posioning
the tray for use.
3.0 General descripon
This wheelchair is equipped with Sedeo Pro seang system. The
Sedeo Pro seang system provides excellent support for the head,
torso, arms and legs. Opmal body support ensures maximum
independence for the wheelchair user.
The wheelchair must be adjusted by a qualied specialist. Incorrect
sengs may have negave consequences for the seang posture.
Main components (Fig. 3.1):
1. Headrest
2. Joysck
3. Armrest
4. Seat cushion
5. Leg rest
6. Backrest cushion
1
4
2
5
3
6
8Sedeo Pro Rev.B
ENGLISH
4.0 Seng up the seang system
The average wheelchair user does not exist. This is why Sunrise
Medical wheelchairs can be pre-set according to specic needs of the
user.
Pre-sengs are carried out once, the rst me the wheelchair is
going to be used. They must be executed by qualied specialist,
unless explicitly stated otherwise.
Tool and calibraon marks
A M5 Allen key is supplied with the seang system. This can be used
by a professional for adjusng all of the seang system sengs. The
M5 Allen key (A) can be found on the frame at the locaon indicated
in gure 4.1.
NOTE / CAUTION!
There are calibraon marks on various parts of the seang system.
The ex-factory sengs are indicated.
4.1 Pre-set seat depth
Backrest frame depth (Fig 4.2):
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
NOTE / CAUTION!
• When a bigger seat depth is required ensure that the cables are
lengthened before the mechanical adjustment takes place.
• There are 2 sizes seat rail/seat plates available: 400-520 and 460-
560 mm. Choose the right seat rail to match the adjusted seat
depth.
• Mount extra seat depth mounng plate from SD 530 mm for more
stability of the long seat rail Fig 4.3.
Seat cushion depth (Fig 4.4)
For the standard seat cushion posion use the holes in Fig 4.4. The
cushion can be posioned one posion more to the front to create
extra seat depth.
Fig. 4.1
Fig. 4.2
Fig. 4.3
Fig. 4.4
1
23
A
B
M5
M5
9Sedeo Pro Rev.B
ENGLISH
4.2 Pre-set seat width
Flip back armrests / Single Post Removable armrests width (Fig. 4.5)
Fine adjustments can be done with the armrest only, for larger
adjustments also pre-set the seat plate width.
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
NOTE / CAUTION!
• Please check that the new arm rest posion does not interfere with
any seat posioning.
Reclining ip back armrest width (Fig. 4.6)
1. Remove 2 (A) screws
2. Adjust (B) to desired posion
3. Tighten (A)
NOTE / CAUTION!
• Please check that the new armrest posion does not interfere with
any seat posioning. If cables are aached, check the length.
Seat plate width (Fig. 4.7)
Li the seat cushion o the Velcro© strips to access the seat plates.
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
The seat width is indicated by the scale that runs alongside each slot.
1
2
3
B
M5
M5
A
1
23
A
B
M5
M5
A
B
B
Fig. 4.5
Fig. 4.6
Fig. 4.7
10 Sedeo Pro Rev.B
ENGLISH
4.3 Pre-set backrest
Backrest angle (Fig 4.8)
1. Turn (A) in order to adjust (B).
NOTE / CAUTION!
Do NOT use an electric tool for this adjustment.
Backrest angle home posion of reclining back (Fig.4.9 - 4.10)
1. Remove bolts (A+B) and rotate (C).
2. Remove cover (D)
3. Remove 2 screws to remove actuator cover (E).
4. Loosen (F) by one turn.
5. Adjust to the desired posion.
6. Tighten (F).
NOTE / CAUTION!
Aer removing bolt (B) the backrest must be held, otherwise it
would fall forwards or backwards.
Backrest height with xed back (Fig 4.11)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
A
B
1
2
L+R
L+R
C
D
M5
1
1
A
BFig. 4.8
Fig. 4.9
A
M5
M5
1
2
3
B
E
3
F
4
Fig. 4.10
Fig. 4.11
11Sedeo Pro Rev.B
ENGLISH
Backrest height with reclining back (Fig 4.12)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Backrest Flexible lateral support angle (Fig 4.13)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Backrest Flexible curvature (Fig 4.14)
The wheelchair has a padded backrest that can be adjusted
to the curvature of the back in order to achieve a comfortable
sing posion and good stability. The user can sit in the
wheelchair when adjustments are being made to the curvature
of the backrest.
1. Open zipper
2. Press A to release strap
3. Release or ghten each strap individually
4. Release A to keep the seng of the strap
J3 Back (Fig 4.15)
& NOTE: The Jay 3 Backrest can be used in conjuncon
with the Sedeo Pro seang system. Please refer to the J3 Back
Owner’s Manual for ng and adjustment.
Fig. 4.15
1
2
3
A
Fig. 4.14
M5
M5
1
22
3
B
A
A
M5
M5
1
2
2
3
B
Fig. 4.12
Fig. 4.13
12 Sedeo Pro Rev.B
ENGLISH
M5
M5
1
2
2
A
B
A
B
1
2
Fig. 4.16
Fig. 4.17
4.4 Pre-set Flip back armrests / Single post removable
armrests
Armrest height (gure 4.16)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Ensure that the arms are supported well, without the
shoulders being pushed upwards.
Armrest depth (gure 4.17)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Posion the Flip back armrest further back in order to obtain
more space for side wards transfers. Posion the armrest
further to the front to obtain more support for forward
transfers.
Armrest pad depth (gure 4.18)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
2
A
B
M5
M5
1
3
Fig. 4.18
13Sedeo Pro Rev.B
ENGLISH
A
E
6M5
Fig. 4.22
Armrest pad width (gure 4.19-4.22)
To remove:
1. Loosen (A).
2. Remove (B).
3. Loosen (E) by one turn.
4. Remove (F).
To posion:
1. Slide (A) together with B or C onto D
NOTE / CAUTION!
Ensure that the ridge on the terminal block falls into the opening
1. Adjust the depth of (A) and ghten (E).
2. Posion the controller bracket.
3. Posion the armrest.
F
E
3
4
M5
A
2
B
M5
1
5
A
C
D
B
Fig. 4.19
Fig. 4.20
Fig. 4.21
14 Sedeo Pro Rev.B
ENGLISH
M5
M5
1
3
2
A
B
B
A
2
3
1
Fig. 4.23
Fig. 4.24
Armrest angle (gure 4.23)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Side guard height (gure 4.24)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
15Sedeo Pro Rev.B
ENGLISH
1
3
2
B
AM5
M5
M5
M5
1
3
A
B
2
M5
M5
1
3
2
A
B
Fig. 4.25
Fig. 4.26
Fig. 4.27
4.5 Pre-set Reclining ip back armrests
Armrest height
Fine or gross adjustment it is a two-part process:
PART 1 (Fig. 4.25)
1. Turn (A) in order to adjust (B).
PART 2 (Fig. 4.26)
1. Loosen (A) by one turn
2. Adjust (B) to the desired posion.
3. Thighten both screws again
Armrest pad depth (Fig.4.27)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
NOTE
In order to reach the rear screw in lower armrest heights, loosen
screws (A) of Fig 4.24 and adjust the angle of the pad rst.
DANGER! / WARNING!
All screws should be checked periodically for ghtness. A loose arm
pad could slip down when pressed.
16 Sedeo Pro Rev.B
ENGLISH
1
2
3
C
A
B
M5
M5
1
2
A
B
3
M5
M5
M5
M5
1
3
A
B
2
M5
M5
1
2
3
A
B
Fig. 4.31
Fig. 4.28
Fig. 4.29
Fig. 4.30
4.6 Side guard
Side guard height (Fig 4.28)
1. Unscrew (A).
2. Adjust (B) to the desired posion.
3. Tighten (A).
Side guard depth (Fig 4.29)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
4.7 Pre-set single post SEDEO Lite armrests
Armrest height (Fig 4.30)
4. Loosen (A) by one turn.
5. Adjust (B) to the desired posion.
6. Tighten (A).
Armrest depth (Fig 4.31)
1. Loosen (A) by one turn.
2. Loosen (B)
3. Adjust (C) to the desired posion.
4. Tighten (A) and (B).
17Sedeo Pro Rev.B
ENGLISH
2
AR
B
1
3
M5
M5
1
3
2B
AL+R
M5
M5
1
B2
A
M5
Fig. 4.33
Fig. 4.34
AL+R
B
2
1
3
M5
M5
4.8 Pre-set center mount legrest
Lower leg length (Fig 4.32)
5. Loosen (A) by one turn.
6. Adjust (B) to the desired posion.
7. Tighten (A).
NOTE / CAUTION!
Ensure that there is sucient free space under (B) for the wheelchair
to drive over obstacles.
Knee angle (Fig 4.33)
1. Loosen (A) by two turns.
2. Adjust (B) to the desired posion.
3. Tighten (A).
NOTE / CAUTION!
Change the height or knee angle if the footplate touches the castor
wheels.
Ankle angle (Fig 4.34)
1. Flip up (A).
2. Turn (B) in order to adjust the ankle angle as desired.
3. Fold (A) down.
Central calf support height (Fig 4.35)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Fig. 4.32
Fig. 4.35
18 Sedeo Pro Rev.B
ENGLISH
4.9 Pre-set Fixed center mount legrest
Lower leg length (Fig 4.36)
1. Loosen (A) by one turn
2. Adjust (B) to the desired posion
3. Tighten (A)
4. Repeat for the other side.
Ankle angle (Fig 4.37)
1. Flip up (A).
2. Turn (B) in order to adjust the ankle angle as desired
(4 mm Allen key)
3. Fold (A) down.
DANGER! / WARNING!
• Aer adjustment and with the seat in its normal drive posion:
Ensure there Is a gap of, (>25 mm.), between the oor and the
footplate at all mes.
• Perform this test with the user sing in the chair loading the
legrest
• Using the chair with the legrest set too low might result in personal
injury or damage to the wheelchair and its surroundings.
Calf pad height (Fig 4.38)
1. Loosen (A) by one turn.
2. Adjust (C) to the desired posion.
3. Tighten (A).
Calf pad width (Fig 4.38)
4. Loosen (B) by one turn.
5. Adjust (C) to the desired posion.
6. Tighten (B).
2
M5
M5
1
3
A
B
A
1
2
B
M4
M5
M5
4
2
5
6
1
3
B
C
A
Fig. 4.36
Fig. 4.37
Fig. 4.38
19Sedeo Pro Rev.B
ENGLISH
4.10 Pre-set power center mount legrest
DANGER! / WARNING!
• Be aware of your environment to make sure you do not injure
your legs when Leg Rests are extended.
• Always ensure that the Leg Rests or foot plates do not come into
contact with the castors before driving the wheelchair.
• Leg Rests are not to be used for liing or carrying the wheelchair
under any circumstances.
• As with all moving parts be careful not to trap your ngers,
(Fig.4.39).
Lower leg length (Fig 4.40)
The power centre mount legrest allows angle adjustment from 90°
to 180° level to ground and a 180 mm powered length extension.
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
4. Repeat for the other side.
NOTE / CAUTION!
In case of oponal ‘Footplate to the oor’ funcon (Fig. 4.41), a
switch is mounted. The switch (A) needs to be adjusted in height
aer adjusng the lower leg length. Make sure the ball of the
switch is completely under the lowest edge of the footrest (B).
Ankle angle (Fig 4.42)
1. Flip up (A).
2. Turn (B) in order to adjust the ankle angle as desired
(4 mm Allen key)
3. Fold (A) down.
DANGER! / WARNING!
• Aer adjustment and with the seat in its normal drive posion:
Ensure there Is a gap of, (>25 mm.), between the oor and the
footplate at all mes.
• Perform this test with the user sing in the chair loading the leg
rest.
Using the chair with the leg rest set too low might result in
personal injury or damage to the wheelchair and its surroundings.
Calf pad height (Fig 4.43)
1. Loosen (A) by one turn.
2. Adjust (C) to the desired posion.
3. Tighten (A).
Calf pad width (Fig 4.43)
4. Loosen (B) by one turn.
5. Adjust (C) to the desired posion.
6. Tighten (B).
2
M5
M5
1
3
A
B
A
B
1m
A
1
2
B
M4
M5
M5
4
2
5
6
1
3
B
C
A
Fig. 4.40
Fig. 4.41
Fig. 4.42
Fig. 4.43
Fig. 4.39
20 Sedeo Pro Rev.B
ENGLISH
1
3
B
2
M5
M5
A
1
3
A
B
2
M5
M5
1
3
AB
2
M5
M5
1
A
2
3
B
Fig. 4.46
Fig. 4.47
4.11 Pre-set swing away legrests
Legrest width (Fig 4.44)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Lower leg length (Fig 4.45)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired posion.
3. Tighten (A).
NOTE / CAUTION!
Ensure that there is sucient free space under (B) for the wheelchair
to drive over obstacles.
Ankle angle (Fig 4.46)
1. Loosen (A) a few turns.
2. Adjust (B) to the desired posion.
3. Tighten (A).
Knee angle manual/power elevang legrest (Fig 4.47)
The posion of the footplates can be changed by adjusng the knee
angle.
1. Loosen (A) a few turns.
2. Adjust (B) to the desired posion.
3. Tighten (A).
NOTE / CAUTION!
Change the height or knee angle if the footplate touches the castor
wheels.
Fig. 4.44
Fig. 4.45
Other manuals for QUICKIE Sedeo Pro
2
Table of contents
Languages:
Other Sunrise Medical Wheelchair manuals
Sunrise Medical
Sunrise Medical Quickie User manual
Sunrise Medical
Sunrise Medical F45 F45 User manual
Sunrise Medical
Sunrise Medical Zippie GS User manual
Sunrise Medical
Sunrise Medical Breezy Relax Manual
Sunrise Medical
Sunrise Medical Quickie Youngster 3 Manual
Sunrise Medical
Sunrise Medical Quickie LX Series Operator's manual
Sunrise Medical
Sunrise Medical R-Net BLUETOOTH User manual
Sunrise Medical
Sunrise Medical Quickie P-222 SE Guide
Sunrise Medical
Sunrise Medical Quickie Rhapsody SB User manual
Sunrise Medical
Sunrise Medical QUICKIE SALSA Manual
Sunrise Medical
Sunrise Medical Quickie P-222 Installation and operation manual
Sunrise Medical
Sunrise Medical Sedeo Pro Omni 2 Reference guide
Sunrise Medical
Sunrise Medical BREEZY 600 SERIES Installation and operation manual
Sunrise Medical
Sunrise Medical SEDEO PRO User manual
Sunrise Medical
Sunrise Medical Quickie Ti Rigid C001022 User manual
Sunrise Medical
Sunrise Medical Quickie Xtender User manual
Sunrise Medical
Sunrise Medical Quickie User manual
Sunrise Medical
Sunrise Medical SEDEO PRO User manual
Sunrise Medical
Sunrise Medical Quickie Chameleon Installation and operation manual
Sunrise Medical
Sunrise Medical J3 Carbon User manual
