SunStone Power SLPO48-200 User manual

LITHIUM BATTERY PACK
USER MANUAL
MODEL: SLPO48-200
※Please read this manual before using the battery pack
※Please keep this manual properly after reading

Sunstone Power Industrial GmbH PT. Solid Power Energi Indonesia Sunstone Power Industry Co., Ltd.
Room 5755, Adam-Opel-Straße 7-11 Komplek Duta Indah Iconic, Blok. C No. 2 Jl. Room 1803A, Tiley Central Plaza. Shenzhen, China
60386 Frankfurt (M), Germany MH Thamrin KM.2 Kebon Nanas, Tangerang 15143 INDONESIA www.sunstonepwer.com
[e-mail] [e-mail] [e-mail]
1. Product key parameters
NO. Specification
Item
56.8V±0.2V
51.2V
40V
200Ah (After standard charging, discharging at 0.5C.)
200Ah (After standard charging, discharging at 0.5C.)
Step 1: 50A constant current charge to 56.8V;
Step 2: 56.8V constant voltage charge until the charging current reaches
5A.
Temp.：0~45°C
5hours (for reference)
50A
100A
Charging: 0~45°C; Discharging: -20~55°C
1month: -20~45°C
3 months: -10~45°C
6 months: 0~25°C
humidity: 45~90% RH
The battery should be cycled every three months.
After 6000 cycles, at 25°C, 50A charge and discharge 80% DOD,
recoverable capacity ≥80%
≤90mΩ(50% capacity，AC impedance1kHz measuring)
About 90kg
52~53.5V
580(L)*483(W)*220(H)
Supports parallel connection of multiple battery pack (24units)
CAN and RS485
Black
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.15
1.16
1.17
1.18
1.19
1.20
Charging voltage
Nominal voltage
Cut-off voltage
Nominal capacity
Min. capacity
Standard charging
current and voltage
Charging time
Max charging current
Max. discharge current
Working Temp.
Storage Temp. and
humidity range
Cycle life
Battery weight
Ex-work voltage
Dimension
Function
Communication
Color
Initial battery
internal resistance
1.1
1.14
Appearance The battery pack surface is clean, free from scratches and mechanical
damage.

Sunstone Power Industrial GmbH PT. Solid Power Energi Indonesia Sunstone Power Industry Co., Ltd.
Room 5755, Adam-Opel-Straße 7-11 Komplek Duta Indah Iconic, Blok. C No. 2 Jl. Room 1803A, Tiley Central Plaza. Shenzhen, China
60386 Frankfurt (M), Germany MH Thamrin KM.2 Kebon Nanas, Tangerang 15143 INDONESIA www.sunstonepwer.com
[e-mail] [e-mail] [e-mail]
3. Main function
2. Structural characteristics and interface definition
A. Basic structure: 2mm sheet metal box structure and rack.
B. Installation method: screw lock.
C. Surface coating: add spray paint.
3.1 Overall structure
The battery pack is mainly composed of the following parts: 4U metal outer box, a 16S2P modular,
accessories include: patch cord, external terminal post etc. The overall structure is simple and easy
to remove & maintain, high reliability, light weight and high energy density.
3.2 Interaction

Sunstone Power Industrial GmbH PT. Solid Power Energi Indonesia Sunstone Power Industry Co., Ltd.
Room 5755, Adam-Opel-Straße 7-11 Komplek Duta Indah Iconic, Blok. C No. 2 Jl. Room 1803A, Tiley Central Plaza. Shenzhen, China
60386 Frankfurt (M), Germany MH Thamrin KM.2 Kebon Nanas, Tangerang 15143 INDONESIA www.sunstonepwer.com
[e-mail] [e-mail] [e-mail]
Item Buttons Rem ark
Up
Down
Enter
Esc
Indicator Light Run
Indicator Light Monitor
Indicator Light Normal
Indicator Light Alarm
If waking up fails, then please try to
wake it up after 10 seconds
Battery will automatcially in sleeping
mode if voltage is over low. It will
be woke up by recharging
1 2 3 4
OFF OFF OFF OFF Invalid address
OFF OFF OFF ON Address 1
OFF OFF ON OFF Address 2
OFF OFF ON ON Address 3
OFF ON OFF OFF Address 4
OFF ON OFF ON Address 5
OFF ON ON OFF Address 6
OFF ON ON ON Address 7
ON OFF OFF OFF Address 8
ON OFF OFF ON Address 9
ON OFF ON OFF Address 10
ON OFF ON ON Address 11
ON ON OFF OFF Address 12
ON ON OFF ON Address 13
ON ON ON OFF Address 14
ON ON ON ON Address 15
Communication
Interface RS485 Pin 3 is A, and Pin 5 is B
Encoder
Set up IP address by encoder if in communication situation
Warning/alarm
BMS
Indicator Light
Normal: Green light flashing
Alarm: Yellow light flashing
Faulty: Red light flashing
Red Button
In working status: Press 3 to 6 seconds to go into sleeping mode
In sleeping status: Press 3 to 6 seconds to wale up
Function
Display
Page up
Display only shows functions, can
not to be set
Page down
Confirm
Back to homepage
Running
Monitor communication status
Normal

Sunstone Power Industrial GmbH PT. Solid Power Energi Indonesia Sunstone Power Industry Co., Ltd.
Room 5755, Adam-Opel-Straße 7-11 Komplek Duta Indah Iconic, Blok. C No. 2 Jl. Room 1803A, Tiley Central Plaza. Shenzhen, China
60386 Frankfurt (M), Germany MH Thamrin KM.2 Kebon Nanas, Tangerang 15143 INDONESIA www.sunstonepwer.com
[e-mail] [e-mail] [e-mail]
4.1 Temp. control threshold value
4.2 Voltage threshold value
4.3 Current threshold value
Level
Running normal
Alarm
Protect
Alarm
Protect
Alarm
Protect
Item
Normal operation temp.
Tpmin / Tpmax(°C)
10<Tpmin<35
-20<Tpmin≤-15
Tpmin≤-20
75≤Tpmax<85
Tpmax>85
60≤Tpmax<65
Tpmax>65
Battery cell voltage range (V)
2.5<Vmin≤2.9
Vmin≤2.5
2.9<V<3.65
3.65≤Vmax≤3.75
Vmax>3.75
Level
Alarm
Protect
Normal
Alarm
Protect
NO.
1
2
3
4
5
Parameter(A)
<75
75≤Imax≤105
Imax >105
Imax <800
Imax >800
Imax>1000
Item
Battery pack
Battery pack stack
Status
Normal
Alarm
Protect
Normal
Alarm
Protect
NO.
1
2
3
4
5
6
Low temp. threshold value
Radiator high temp. threshold value
Battery cell high temp. threshold value