Suntek HC-940Pro User manual

Model:HC-900Plus
APP&Cloud Service
30MP 2
H.265
Model:HC-900Plus
APP&Cloud Service
30MP 2
H.265
4G Trail Camera
Live video & APP
Model: HC-940Pro-LI

Video recording
SPECIFICATIONS
Photo recording
Photo resolution
File format
Time lapse mode
Multi-shot mode
Stamp
Capture mode
30 /24 / 20 / 16 / 12 / 8 / 5 / 3 MP
.JPG
5 / 30min , 1 / 2 / 3 / 6 / 12 / 24hour
Up to 9 photos per detection
Date, time, temperature (℃/℉)and
moon phase
Camera /Video /Camera&Video /
Time-lapse
4K / 2K / 1080P / 720P / VGA
.MP4 / H.265
5s /10s / 30s / 60s / 90s
Colorful mode at daytime,
black and white mode at night
Video resolution
File format
Video length
Capture mode
Memory storage
Support Internal memory: none
External memory: SD card
(up to 256GB, Not included)
- 01 -
Cellular/Wireless Transmission
Picture Instantly record in the Cloud and APP
Video
Live Video APP control to check video or record
Instantly record in the Cloud and APP

Power source
Dimensions
Waterproof level
Viewing
Built-in screen TFT 2.4”
Lithium Battery
External Power Jack
10000mA LI-Battery
DC 12V/1A(3.5x1.3mm)
Detection system
Motion Sensor
Detection Angle
Detection Range
Trigger Speed
Delay between each detection
56pcs LEDs
＜98 Ft
Auto / 100 / 200 / 400
1x PIR
90°
Adjustable from 1 to 98 Ft
0.3second
1/10 seconds, 1/3/5/10/15/30 minutes
Night time illumination system
Infrat LEDs
Flash Range
Exposure
Optical field of view
120°
155mm x 110mm x 85mm
Recommendations
Operating temperature (-4℉to +158℉) (-20℃to +70℃)
IP 65
- 02 -

THE BASICS
- 03 -
Antenna
Photosensitive
LED

- 04 -
LI-battery
Battery Lock

INSTALLATION
- 05 -
Step 1
Push battery latch to ON, then
place the battery from right to
left side, and lay it flat.
01
02
Push battery latch to OFF to lock
the battery.
!
TIPS:
Push battery latch to ON
then take the battery out.

- 06 -
Step 3
Insert the SIM card into the card slot. Push the camera switch
to the TEST and check that the operator name will appear on
the left side of the screen.
Insert SD card (Not included) to trail camera.
Step 2

- 07 -
App (iOS) App (Android)
or
Scan the QR codes below search for“SUNTEKCAM” on the Apple appstore
or search for “SUNTEKCAM” on the Google Play to download the app.
Step 4
Step 5
or
②
Check the signal grid color.
Green means receiving signal, White means signal reception failed.
Need to check if the sim card whether locked or effective .
Tips：slide the mode switch form TEST to ON.
The camera will start working after 10 seconds countdown, the red
indicator light blinks meanwhile.
①Slide the mode switch

- 08 -

- 09 -

- 10 -
OPERATING BUTTON
MENU Menu Button -- Menu Setting
Shot Button -- Start/End Video Recording or Photo Taking
Video Button -- Video Recording Mode
Camera Button -- Photo Mode
Replay Button -- Replay Mode
OK Button
EXTERNAL POWER SUPPLY
Use 12V DC Power source (Not included)
OK
SHOT
>
>
>
Tips：In replay viewing page, slide the " " and " " for browsing.
Press the " SHOT" button, to quit the replay view page.
>
>

- 11 -
Setup
Sub Menu
Description
Mode
Camera,video,camera
＆video,Timelapse
Picture,video,picture
and video,taking piture
regular
Resolution
Each Video max 90 sec,
default 5 sec
Record Audio
On / Off
Video With Sound
SETUP MENU
4K, 2K, 1080P, 720P, VGA Video resolution
5/10/30/60/90 seconds
Video Length

- 12 -
Setup Sub Menu Description
Image resolution
Interval Max 30 minutes delay
camera menu language
Sequcence 1/3/6/9 pictures Max 9 pics one shot
ISO Auto/100/200/400 Exposure level
Over write On / Off Cycle Recording
PIR Sensitivity High/Medium/Low Adjust PIR sensitivity
Frequency 50HZ / 60HZ Screen refresh rate
Camera ID CAM000 6 numbers or letters
Password On / Off 4 numbers
Working Timer 00:00:00 to 23:59:59 N/L
Date / Time DD/MM/YY N/L
Format OK / Cancel Format memory card
Default Setting OK / Cancel Back to default
1/10senconds,
30/24/20/16/12/8/5/3MP
Image Size
1/3/5/10/15/30minutes
5/30minutes,
1/2/3/6/12/24hour
TimeLapse Take pic every 5min
EN/FR/DE/IT/ES/POR/HR/
DAN/SVE/SUO/POL/PYC
Language
Transfer frequency Each N/L
Version camera firmware version

- 13 -
1).Click to the menu interface to open Network and
select Check Update.
2).Check whether your machine is the latest version after
opening.
When the machine interface displays the current version
and there is no prompt to update, it means it is now the
latest version.
SYSTEM UPGRAD

- 14 -
If the blue font New Version appears below the version
number, you can choose to update or not to update.
If you choose to update, you need to click FW to update.
Wait until the progress bar reaches 100% and the upgrade is
complete.

SD Card reader
- 15 -
Tweezers Adapter
Mounting Strap
Camera User Manual
IN THE BOX

Q: What kind of telephone operators do you support?
TROUBLESHOOTING
A：You only need to prepare a SIM card，(Please note that it must be a prepaid SIM
card，closed PIN code,) Use your mobile phone to download our APP (SUNTEKCAM),
use the APP to scan the camera's device ID, device name, you can fill in any name,
device password 123456, then you can use it
- 16 -
Q：Iwant to usethiscamera, what doIneedto
p
re
p
are？how to setu
p
?
Q：Is it possible to receive live images remotely?
A：This camera support video and image receiving remotely and wirelessly,
also support live video.
A:This camera support most sim cards in Europe, if you are in the US or
Canada, please buy US version ones. If you have met any question during
using or setting, just contact us for solution.