Super Circuits PC508-IR2 User manual

Model : PC508-IR2
Pip e Hole
Camera Unit
User Manual
Sunshade
Postitioning Sticker
T20 Hollow 6-Lobe
Spanner x1
Front Cover Anti-Tamper
Plate x1
Wall Anchor Plastic
Sheath x4
Wall Anchor x4
Base Anti-Tamper
Plate
Base Anti-Tamper
Screw x2
1
2
3
4
5
6
7
8
9
10
Note.
No te
The Accessories Pack
contains parts No.4~10
1.Do not touch the lens or view port glass directly.
2.Do not adjust lens in a wet enviroment to avoid damage to circuitry.
3.Do not install next to another light source as this may cause
light reflection.
4.Do not place hand between camera unit and upper sort as this
it may be caught in mechanism.
5.Do not hang the camera.
6.After loosening the screw the sunshade can be adjusted backwards
and forwards.
Make sure anti-tamper screw is securely screwes back into the slot
after adjustment.
7.After opening the front cover to adjust the focus, re-attach and
secure firmly in place to enxure that the unit remains watertight.
8.When assembly is complete, check that all screw in the unit are
properly secured.
Enable IR light automatically
according to distance and
brightness.
IR Projection Distance
Long distance IR light.
Auto ICR
For low light conditions
automatically switches
IR Cut Filter on/off.
Dual Power Supply
Design
Dual power supply board provides
DC 12/AC 24V inputs optional`( ) .
Real 500 Pound
Can resist external impacts of
over 500 lbs.
Anti-Tamper Protection
Installed using screws that require
special tools to install/remove.
Waterproofing
Unit is waterproofed to level IP 66
with anti-fogging double glass
design.
3-Axis &
Vandal-proofing
`
Support can rotate separately in
the XYZ axes
Vandal-proof design
40 IR
Can be equipped with 40 high
intensity infra-red LED lights.
Auto Low Lux Mode
Auto Exposure
Compensation
Removes over-exposure for close
up shots.
500LB
Vandal
Spot Elimination
Vandal Screw Long Range
PS: The Explanation of the Red Switch on IR board
Position ON OFF Description
1
2
Lux Enhancement
(Default)
5 Seconds
(Default)
Glare-Elimination
15 Seconds
Recommend to use under
the low Lux environment
ICR Delay Time
1
2
ON
悲
1
2
ON
悲

Installation
Instructions
Installation Type
Item
Sensor
System & Nr. of Pixels
Lens
Horizontal Resolution
Scanning System
Sensitivity
Synchronization
S/N Ratio
Gamma Correction
Electronic Shuttler
Video Output
Power Supply
Power Consumption
Auto White Balance
Back Light Compensation
Dimension
Net Weight
Storage Temperature
Operating Temperature
IR LED
1/3” CCD Sensor
NTSC: 768(H)*494(V) / PAL: 752(H)*582(V)
9~22mm Vari-Focal lens
500 TV lines
2:1 interlace
0.1 Lux/ F1.4
Internal
More than 48dB
0.45
Auto and up 1/100,000
1 Vp-p output, 75 Ohm Composite
AC 24V / DC 12V
IR OFF :200mA(MAX) / IR ON : 800mA(MAX)
MCT-AWB Technology (Multi-color Temp.)
Full Auto
178.6mm(H)* 100mm*(W)*290mm(L)
1700g
-30º ~ +60º C
-10º ~ +45º C
850mm*40
PC508-IR2
Waterproof Level
Day night
IP 66
automatic switchover from color to monochrome by IR cut filter