SuperATV WS-P-RAN900-V User manual

INSTALLATION INSTRUCTIONS
© 2015 SuperATV.com®. All Rights Reserved. IN-WS-P-RAN900-V 4/6/2015
Read instructions and view illustrations before beginning.
Need help with your installation?
1-812-574-7777
[e-mail] www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
SuperATV does not recommend keeping Windshield installed while transporting on an open air trailer.
Acorn Nut8xShoulder Screw8xThumb Screw2x
Mount Clamps x 4
Seal
Windshield Cleaning:
- Do not use a dry cloth, or your hands, to wipe off Windshield; Scratching will occur.
- Donotusewindowcleaninguids(Windex,409,etc)oranysolvents(gasoline,denaturedalcohol,acetone,etc).
- Never use abrasive cleaners, abrasive pads, or gritty cloths.
1. ThouroughlyrinseWindshieldtooatoffdirtandmud.
2. Usingasoftcloth,ormicrobercloth,cleanWindshieldwithwarmwaterandagentledetergent.Babyshampooor
hand washing soap are recommended.
3. To prevent water spots, use a chamois to blot Windshield dry.
Windshield
Vent (R)
Vent (L)
Vented Full Windshield
for Polaris Ranger XP® 900
Thank You
For Choosing
2753 Michigan Road • Madison, Indiana 47250 • 812-574-7777
Liability Statement
SuperATV’s® products are designed to best t user’s ATV/UTV under stock
conditions.Adding, modifying, or fabricating any factory or aftermarket parts will
void any warranty provided by SuperATV®and is not recommended. SuperATV’s®
productscouldinterferewithotheraftermarketaccessories.Ifuserhasaftermarket
products on machine, contact SuperATV®toverifythattheywillworktogether.
Although SuperATV®hasthousandsofsatisedcustomers,usershouldbeaware
thatinstallingliftkits,longtravel,orsuspensionkits,tires,etc.willchangetheride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product’s ability to
protect user from severe injury or death. SuperATV®urges operators and occupants
to wear a helmet and appropriate riding gear at all times.
BypurchasingandinstallingSuperATV®products, user agrees that should damages
occur, SuperATV®will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV®. The total liability of seller to
userforalldamages,losses,andcausesofaction,ifany,shallnotexceedthetotal
purchase price paid for the product that gave rise to the claim.
SuperATV®will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products will
not be covered by SuperATV®. SuperATV®parts and products are not warrantied if
itemwasnotinstalledproperly,misused,ormodied.

IN-WS-P-RAN900-V 2
Bulb portion of Seal to always
face towards vehicle
Seal
"Seal Installation"
Seal along bottom from Clamp to Clamp
Seal along top
Seal between Clamps
Seal between Clamps
Windshields contain shipping bolts that hold Captive
Nuts in place. Remove and discard shipping bolts.
Captive Nut
2x
To ease installation, soak Seal in hot water before cutting or installing to increase exibility.

IN-WS-P-RAN900-V 3
Acorn Nut
4x
Shoulder Screw
4x
Vent (R)
Windshield
Assemble Vents (R)(L) to Windshield with hardware shown.
Front
(passenger side)

IN-WS-P-RAN900-V 4
Seal to be in contact with Hood
(passenger side)
Wrap straps around Roll Bar
and through Mount Clamps
Insert Clamps into slots
in Windshield
1. Insert Mount Clamps into Windshield.
2. WraparoundvehicleRollBarandsecure.
3. Ensure that Seal is in contact with vehicle Hood.
Windshield
Vent (R)
Thumb Screw
1x
Front
(passenger side)
install Thumb Screw though each Vent and into factory installed Captive Nut.