SuperATV IN-WS-P-RZR1K-V User manual

Windshield
Left Vent
Right Vent
Full Vented Windshield
for Polaris RZR®XP 1000
INSTALLATION INSTRUCTIONS
© 2016 SuperATV.com®. All Rights Reserved. IN-WS-P-RZR1K-V 6/9/2016
Read instructions and view illustrations before beginning.
Need help with your installation?
1-812-574-7777
[e-mail] www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
SuperATV does not recommend keeping Windshield
installed while transporting on an open air trailer.
Thank You
For Choosing
2753 Michigan Road • Madison, Indiana 47250 • 812-574-7777
Liability Statement
SuperATV’s® products are designed to best t user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts will
void any warranty provided by SuperATV®and is not recommended. SuperATV’s®
products could interfere with other aftermarket accessories. If user has aftermarket
products on machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satised customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride
of machine and may increase maintenance and part wear. Operating any o󰀨-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product’s ability to
protect user from severe injury or death. SuperATV®urges operators and occupants
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV®products, user agrees that should damages
occur, SuperATV®will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV®. The total liability of seller to
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV®will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products will
not be covered by SuperATV®. SuperATV®parts and products are not warrantied if
item was not installed properly, misused, or modied.
Mount Clamp x 4
Acorn Nut8xShoulder Screw8xThumb Screw2x
Seal

IN-WS-P-RZR1K-V 2
Install Seal to bottom edge of Windshield
"Seal Installation"
To ease installation, soak Seal in hot water before cutting or installing to increase exibility.
Windshields contain shipping bolts that hold Captive
Nuts in place. Remove and discard shipping bolts.
Captive Nut
2x
Seal

IN-WS-P-RZR1K-V 3
Acorn Nut
4x
Shoulder Screw
4x
Right Vent
Windshield
Assemble Vents to Windshield with hardware shown.
Front
(passenger side)
Windshield Cleaning:
- Do not use a dry cloth, or your hands, to wipe o󰀨 Windshield; Scratching will occur.
- Do not use window cleaning uids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
- Never use abrasive cleaners, abrasive pads, or gritty cloths.
1. Thouroughly rinse Windshield to oat o󰀨 dirt and mud.
2. Using a soft cloth, or microber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo or hand
washing soap are recommended.
3. To prevent water spots, use a chamois and blot Windshield dry.

IN-WS-P-RZR1K-V 4
Seal in contact with Hood
- Insert Clamps into slots in Windshield. Wrap straps around Cage and through Clamps.
Windshield
Thumb Screw
1x
Front
(passenger side)
install Thumb Screw though each Vent and
into factory installed Captive Nut.
Right Vent