SuperATV DOOR-CF-ZF800EX-00 User manual

INSTALLATION INSTRUCTIONS
© 2017 SuperATV.com®. All Rights Reserved. IN-DOOR-CF-ZF800EX 5/5/2017
Doors: for CFMOTO ZF800EX
Item Description
A Passenger Door
B Drive Door
(kit contents continue on following page)
A
B
2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
Thank You
For Choosing
Need help with your installation?
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
[e-mail]
1-855-743-3427
Read instructions and view illustrations before beginning.

IN-DOOR-CF-ZF800EX 2
(kit contents continued)
C
F
K
D
G
E
H
J
Item Description
C Passenger Upper Bracket
D Passenger Lower Bracket
E Passenger Strap
F Passenger Striker Bracket
Item Description
G Driver Upper Bracket
H Driver Lower Bracket
J Driver Strap
K Driver Striker Bracket
M10-1.50 Nylock Nut4x
M10-1.50 x 40mm Lg. SHCS4x
15x M6-1.0 x 16mm Lg. FHCS M6-1.0 Nylock Nut6x
M8-1.25 Jam Nut2x
M8-1.25 Nylock Nut2x
M8-1.25 Shoulder Bolt2x

IN-DOOR-CF-ZF800EX 3
Panel
(driver)
Rail
Fender Flare
Remove components shown: Keep all components removed from machine.

IN-DOOR-CF-ZF800EX 4
(driver)
remove Plastic Clips from
Side Panel and pull back
remove Panel
(driver)
Fender Flare
Remove components shown: Keep all components removed from machine.

IN-DOOR-CF-ZF800EX 5
Remove components shown: Keep all components removed from machine.
- Repeat steps for passenger side.
(driver)
Hand Rail and Protection Tube
replace stock hardware after removing
(driver)
Mirror, Bracket, and hardware.
items will not be reinstalled

IN-DOOR-CF-ZF800EX 6
- Install Passenger Upper Bracket (C) to stock location of Hand Rail. Secure with hardware shown.
- Install Passenger Lower Bracket (D) to stock location of Protection Tube. Secure with hardware shown.
(passenger)
C
- Tighten all hardware completely.
- Reinstall stock components; see pages 3 - 5.
M6 x 16mm M6 Nut
D
(passenger)
stock
stock

IN-DOOR-CF-ZF800EX 7
- Install Passenger Door (A) to Passenger Upper Bracket (C) and
Passenger Lower Bracket (D) with hardware shown.
E
A
(passenger)
(passenger)
- Install Passenger Strap (E) to Passenger Door (A) and Seat Frame with hardware shown.
D
C
Seat Frame
M6 x 16mm
2x
M6 x 16mm M6 Nut
2 each
M6 x 16mm
See page 9 for Driver Strap (J) installation.
M6 x 16mm
2x

IN-DOOR-CF-ZF800EX 8
- Install Passenger Striker Bracket (F) with hardware shown.
(passenger)
F
2 each
M10 Nut
M10 x 40mm
- Close Door, engage Latch, and align to machine.
- Tighten all hardware completely.
- Repeat steps for opposite side.
Shoulder Bolt
M8 Nut
(Nylock)
M8 Nut

IN-DOOR-CF-ZF800EX 9
- Install Driver Strap (J) to Driver Door (B) and Seat Frame with stock hardware.
(driver)
remove
Seat Frame
- Remove hardware shown from Seat Frame.
(driver)
J
stock
M6 x 16mm M6 Nut
2 each
B

IN-DOOR-CF-ZF800EX 10
Liability Statement
SuperATV’s®products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty
provided by SuperATV®and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact
SuperATV®to verify that they will work together.
Although SuperATV®has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine
and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No
warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV®urges operators and occupants to wear a helmet and
appropriate riding gear at all times.
By purchasing and installing SuperATV®products, user agrees that should damages occur, SuperATV®will not be held responsible for loss of time, use, labor fees, replacement
parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any
product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the
product that gave rise to the claim.
SuperATV®will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered
by SuperATV®. SuperATV®parts and products are not warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary
depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and
personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle
safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to
hold SuperATV®harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all
applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV®harmless from any
violation thereof.