SuperATV FP-P-RZR1K-001 User manual

© 2016 SuperATV.com. All Rights Reserved. IN-FP-P-RZR1K-001 10/3/2016
Nerf Bars: for Polaris RZR®XP 1000
INSTALLATION INSTRUCTIONS
2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
Thank You
For Choosing
Right Nerf Bar
Locating Pin
2x
Left Nerf Bar
M6-1.0 x 35mm Lg. BHCS
6x M10 Lock Washer4x
M10-1.50 x 70mm Lg. FHCS
4x
M12-1.75 x 30mm Lg. BHCS
2x
Drill GuideAlignment Washer
6x 1x
End Cap
End Cap
Read instructions and view illustrations before beginning.
Need help with your installation?
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
[e-mail]
1-855-743-3427

2IN-FP-P-RZR1K-001
- Install Locating Pin and Alignment Washer to Right Nerf Bar.
- If not installed, install End Cap with hardware shown.
- Repeat for Left Nerf Bar.
Right Nerf Bar
Alignment Washer
Locating Pin
M12 x 30mm
+

3IN-FP-P-RZR1K-001
(passenger side)
Drill Guide
stock bolt
- Remove stock bolt and install Drill Guide into
hole in plastic and frame.
- Secure Drill Guide with stock bolt.
- Use a Ø7/16" bit and drill out hole in Frame.
- Remove Drill Guide.
- Repeat for locations shown.
- Repeat for opposite side.
REAR LOCATIONS
remove bolt; discard
FRONT LOCATION

4IN-FP-P-RZR1K-001
Do not tighten hardware unless noted.
- Secure to machine with hardware shown.
(passenger side)
Right Nerf Bar
Alignment Washer
Lock Washer
M10 x 70mm
M6 x 35mm

5IN-FP-P-RZR1K-001
(passenger side)
Right Nerf Bar
Alignment Washer
M6 x 35mm
Lock Washer
M10 x 70mm
- Secure to machine with hardware shown.
- Repeat steps for Left Nerf Bar.
- Align to machine and tighten all hardware completely.

6IN-FP-P-RZR1K-001
Liability Statement
SuperATV’s®products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty
provided by SuperATV®and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact
SuperATV®to verify that they will work together.
Although SuperATV®has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine
and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No
warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV®urges operators and occupants to wear a helmet and
appropriate riding gear at all times.
By purchasing and installing SuperATV®products, user agrees that should damages occur, SuperATV®will not be held responsible for loss of time, use, labor fees, replacement
parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any
product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the
product that gave rise to the claim.
SuperATV®will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered
by SuperATV®. SuperATV®parts and products are not warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary
depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and
personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle
safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to
hold SuperATV®harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all
applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV®harmless from any
violation thereof.