superbrightleds ELL-NW3W User manual

Weatherproof LED Eyelid Light
Important: Read all instructions prior to installation.
User Manual
Part Number:
Weatherproof LED Eyelid Light
ELL-NW3W
ELL-WW3W
Installation Manual
Rev Date: V1 11/22/2016Rev Date: V1 11/22/2016
Dimensional Drawings
ELL-NW3W
ELL-WW3W

Installation Instructions
Rev Date: V1 11/22/2016
Safety and Notes
Included Parts
Installation
• Read all of these instructions thoroughly before use. Keep this
instruction manual in a safe place for future reference.
• This lighting xture is only suitable for a 12V AC or DC power supply.
Note: If Running power wire on surface skip step 1. Bend power wire
down and proceed to step 2.
1. Drill 1/4” hole where light is to be mounted. Feed power wire
1 - LED Eyelid Step/Deck Light
3 - M4 x 8mm screws with “O” ring
3 - M4 x 25mm screws with “O” ring
3 - Plastic Anchor
Weatherproof LED Eyelid Light
Important: Read all instructions prior to installation.
User Manual
Part Number:
ELL-NW3W
ELL-WW3W
3. Install front cover on base with lens pointing down. Ensure screw
holes are aligned, and secure cover to base using M4 x 8mm screws
with “O” rings (Fig. 2).
through hole.
2. Position light base ensuring LEDs
are pointing down and reector
plate is level. Secure light base
to mounting surface using M4 x
25mm screws with “O” rings and
anchors if required (Fig. 1).
Reector
Plate
Base FIGURE 1
FIGURE 2
Lens
Front
Cover