Surefire FURY-DFT User manual

USER MANUAL
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patent: 8,222,138
Revision B 11-2018
71-01-1084
FURY-DFT
MAINTENANCE
Wipe with a clean, dry cloth. For tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools.
For a complete listing, visit www.surefire.com/parts-accessories.
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire
warrants that if you — our customer — purchase one of our products, and we
determine that it is defective in material and/or workmanship during your lifetime,
we will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like
batteries draining, headbands and headpads wearing out, ink cartridges running
out, and switches wearing out — or damage resulting from abuse, alterations,
unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an
obsolete product with a current production, like model. In the event that any issue
with a SureFire product is not covered under this warranty SureFire can arrange to
have the product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied
conditions and warranties, including, without limitation, any implied warranty
or condition of merchantability or fitness for a particular purpose, or accuracy of
any informational content, are hereby excluded and disclaimed by SureFire; and
in no event will SureFire be liable for any special, direct, indirect, consequential,
incidental or punitive damages howsoever arising and regardless of the theory
of liability, even if advised of the possibility of such damages. Products, prices,
availability, specifications, and offers are subject to change or cancellation at any
time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return
Merchandise Authorization number (RMA#). Then package the unit carefully and
send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
DUAL FUEL TACTICAL LED FLASHLIGHT
BODY
TAILCAP
LED
Ă 1.390
1.490
5.488
FURY-DFT
OUTPUT 18650: 1,500 123A: 1,100 lumens
RUNTIME 18650: 3.5 123A: 2.25 hours
PEAK BEAM INTENSITY 18650: 25,200 123A: 16,700 candela
DISTANCE 18650: 315 123A: 255 meters
CONSTRUCTION Aluminum
FINISH Mil-Spec Hard Anodized
WEIGHT (w/batteries) 6.5 oz (184 g)
LENGTH 5.6 in (14.2cm)
BEZEL DIAMETER 1.39 in (3.5cm)
BATTERIES One SF18650B lithium-ion rechargeable (incl) or
Two 123A lithium (not incl)
SWITCHING Click tailcap
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
*SF18650B battery required for 1,500 lumens output, 3.5 hours runtime,
25,200 candela and 315 meters beam distance
SPECIFICATIONS

BATTERY INFORMATION & WARNINGS
For complete battery information and warnings, reference the enclosed
BATTERY INFORMATION / WARNING insert in your illumination tool’s
original packaging or visit www.surefire.com/battery-warnings-handling
LOCKOUT TAILCAP (US PAT. RE40125)
Most SureFire illumination tools feature a lockout tailcap, which prevents
accidental activation during storage or transport. The tailcap may need
to be enabled prior to light operation.
To enable, rotate tailcap clockwise until tight.
To lock out tailcap, rotate counterclockwise until light will not
activate when pushbutton is pressed.
LIGHT OPERATION
Press lightly for momentary or press fully to click for constant-on.
BATTERY REPLACEMENT
Most SureFire illumination tools ship preloaded with
batteries. To load or replace batteries:
1. Unscrew tailcap counterclockwise and remove.
2. Remove old batteries and dispose of properly.
3. Insert two new 123A lithium batteries or one 18650 battery with the
positive (+) terminal(s) oriented forward.
4. Replace tailcap by screwing on clockwise. Press pushbutton
(with tailcap enabled) to test.
The FURY-DFT can be powered by two 123A primary batteries or one protected 18650
with a minimum 6 Ampere (A) discharge rate. Fully charged, protected non-SureFire
branded 18650 batteries that have a maximum discharge rate of less than 6A may not
allow the FURY-DFT to operate normally. Go to www.surere.com to purchase a
SF18650B which come standard with a minimum 8-10A discharge rate. NEVER use an
unprotected 18650 in the FURY-DFT, as this can result in re and/or venting.
Ă 1.390
1.490
5.488
ENABLE
DISABLE
Ă 1.390
1.490
5.488