Surewerx Jackson 14350 User manual

Reusable Splash Protection
Face Shield Assembly,
Operating, and
Maintenance Instructions
14350
USA:
SureWerx USA Inc.,
Elgin, IL, USA 60123
surewerx.com/usa
Canada:
SureWerx, 49 Schooner St.,
Coquitlam, BC V3K 0B3
surewerx.com
Europe :
Balder d.o.o. Teslova ulica 30
SI-1000 Ljubljana, Slovenia
balder.eu
2. Remove visor from plastic bag shown in Fig 2a
Fig 2a
3. Snap visor to headgear strap (4 places) as shown in Fig 3a.
*Press firmly to ensure proper attachment
Fig 3a
Cleaning Instructions
• The visor and head can be cleaned by using warm water and soap or
mild detergent. Air dry or dry with a soft, lint-free cloth.
Instruction: INST - 14350
Effective: 1/2020

• This manual is to be removed by the wearer only. Failure to read and
follow these instructions and warnings could result in serious injury.
• Note: Some materials, which may come in to contact with the wearer’s
skin, could cause allergic reactions in susceptible individuals.
• The 14350 Jackson Splash Protection Face Shield has been designed for
a single user, for multiple uses.
• The following components of the 14350 Jackson Splash Protection Face
Shield may come in to contact with the body:
• Polyethylene Head Band
• Polyurethene Foam Sweatband
• The product has not been FDA cleared or approved
• The product has been authorized by FDA under an EUA for use by
healthcare providers as personal protective equipment.
• This product is only authorized for the duration of the declaration
that circumstances justifying the authorization of emergency use under
Section 564(b)(1) of the Act, 21 USC 360bbb-3(b)(1) unless the
authorization is terminated or revoked sooner.
1. Peel adhesive backing off sweatband and press on the headgear strap
as shown in Fig 1a
14350
WARNING!
For your own protection, read these instructions before using. It is the responsibility
of the user to understand the limitations, proper use, care and maintenance of the
product. Failure to read these instructions could result in serious injury.
Replacement Parts
1. Part #14355 - Replacement Window
2. Part #14356 - Replacement Sweatband
• Check with your supervisor to determine whether this face shield and
window offers the proper protection for the application.
• The 14350 Jackson Splash Protection Face shield will not provide
protection against impact hazards or falling objects. This visor is
designed to provide limited protection from bumps or lacerations.
• Inspect face shield and windows frequently and immediately replace if
dull, pitted, scratched or damaged. Chemical contact can cause rapid
degradation which severely reduces protection.
• Do not use face shield until a secure fit has been obtained every time.
• Products need to be used only with appropriate Jackson branded
replacement components
Fig 1a
1
2