SVANTTO IAM02 User manual

User Manual
IAM02 Time Clock
1.10

Page2of50
IAM02 Time Clock User Manual
Version 1.00
Version History
Date
By
Changes
Version
2022-3-16
Chuy
Initial Version
1.00
2022-3-22
Chuy
Replace Dusty Pictures.
Modify the USB Flash Drive Expression.
Modify Overview Image.
Modify Display Interface Image.
Add Video Links.
Correct the Wrong Words.
1.01
2022-3-25
Chuy
Modify Display Interface Image.
Modify Grammars
1.02
2022-3-29
Chuy
Modify Product Overview Image.
Modify Function Key Images.
Add Hyperlink.
Modify Section 3.5 Error Statement.
Replace Unclear Picture.
1.10

Page3of50
IAM02 Time Clock User Manual
Version 1.00
Contents
Version History...................................................................................................................................................... 2
1.0. Product Introduction...............................................................................................................................5
1.1. What’s in the Box......................................................................................................................................5
1.2. Product Overview......................................................................................................................................6
1.3. Function Keyboard.................................................................................................................................... 6
1.4. Display Interface....................................................................................................................................... 7
2.0. Machine Mounting Method.................................................................................................................... 8
3.0. Operating Instructions............................................................................................................................9
3.1. Before Using..............................................................................................................................................9
3.2. Set User Information................................................................................................................................. 9
3.2.1. Set User Information on the Machine...................................................................................................9
3.2.2. Set User Information on the Computer...............................................................................................14
3.3. Set the Shift Time....................................................................................................................................17
3.3.1. Set the Shift Time on the Machine..................................................................................................... 17
3.3.2. Set the Shift Time on the computer.................................................................................................... 18
3.4. Set the Shift............................................................................................................................................. 21
3.4.1. Set the Shift on the Machine...............................................................................................................21
3.4.2. Set the Shift on the computer..............................................................................................................25
3.5. Attendance Punch....................................................................................................................................27
3.5.1. Punch by Fingerprint.......................................................................................................................... 27
3.5.2. Punch by ID Card............................................................................................................................... 27
3.5.3. Punch by Password.............................................................................................................................27
3.6. Download the Attendance Report........................................................................................................... 28
4.0. Menu Setting.......................................................................................................................................... 30
4.1. User..........................................................................................................................................................30
4.1.1. Synchronize User Information............................................................................................................30
4.1.2. Download User Information............................................................................................................... 30
4.1.3. Upload User Information....................................................................................................................30
4.1.4. Enroll.................................................................................................................................................. 32
4.1.5. Delete..................................................................................................................................................32
4.1.6. Departments........................................................................................................................................33
4.1.7. View User List....................................................................................................................................34
4.2. Attendance Settings................................................................................................................................. 35
4.2.1. AttendSetting Upload......................................................................................................................... 35
4.2.2. AttendSetting Download.................................................................................................................... 35
4.2.3. Shift Time Zone..................................................................................................................................35
4.2.4. TR Schedule........................................................................................................................................35
4.2.5. Verification Mode...............................................................................................................................37
4.2.6. Bell Time............................................................................................................................................ 38
4.2.7. Reverify Time.....................................................................................................................................39
4.2.8. Attendance Rules................................................................................................................................ 39
4.3. Shift Settings........................................................................................................................................... 40
4.4. Setting......................................................................................................................................................40
4.4.1. Device ID............................................................................................................................................40
4.4.2. Volume............................................................................................................................................... 41
4.4.3. Calibrate Sensor..................................................................................................................................41
4.4.4. Date and Time.....................................................................................................................................41
4.4.5. Power.................................................................................................................................................. 42
4.4.6. Upgrade Firmware..............................................................................................................................42
4.4.7. Factory Reset...................................................................................................................................... 42

Page4of50
IAM02 Time Clock User Manual
Version 1.00
4.4.8. Backup All Data................................................................................................................................. 43
4.4.9. Restore All Data................................................................................................................................. 43
4.5. Log Management.....................................................................................................................................43
4.5.1. View Time Log...................................................................................................................................43
4.5.2. Management Log Warning................................................................................................................. 45
4.5.3. Time Log Warning............................................................................................................................. 45
4.5.4. Clear All Log...................................................................................................................................... 45
4.5.5. Management Log Download.............................................................................................................. 46
4.5.6. Download Time Log(txt)....................................................................................................................46
4.5.7. Download Management Log(txt)....................................................................................................... 47
4.6. System Info..............................................................................................................................................47
4.6.1. Enroll Info...........................................................................................................................................47
4.6.2. Device Info......................................................................................................................................... 47
4.6.3. Test 48
5.0. Product Specification............................................................................................................................ 49

Page5of50
IAM02 Time Clock User Manual
Version 1.00
1.0. Product Introduction
Thank you for using our product. This product uses the latest biometric solution with a high-speed and stable
ARM processor.
The performance indicators such as recognition and speed of the product are at the leading level in the industry.
Fully meet your safe and efficient work requirements.
All pictures shown are for illustration purposes only. Actual products may vary due to product improvements.
The actual product shall prevail.
Figure 1- 1 IAM02
1.1. What’s in the Box
After receiving the package, please open and inspect the product inside.
Figure 1- 2 What’s in the Box

Page6of50
IAM02 Time Clock User Manual
Version 1.00
1.2. Product Overview
Figure 1- 3 Overview
1.3. Function Keyboard
Table 1- 1 Function Keyboard
1
Number key
1. Input digit in the input box.
2. Input letter in the input box.
Press the "1" key to switch the TR schedule to AM In.
Press the "2" key to switch the TR schedule to AM Out.
Press the "3" key to switch the TR schedule to PM In.
Press the "4" key to switch the TR schedule to PM Out.
Press the "5" key to switch the TR schedule to OT In.
Press the "6" key to switch the TR schedule to OT Out.
2
ESC Key
1. Return to the previous interface.
2. Exit the face-to-face interface.

Page7of50
IAM02 Time Clock User Manual
Version 1.00
3
MENU Key
1. Enter the menu interface.
2. Delete the content of the input box.
4
Power Key
1. Power On.
2. Press the power key in the input box to switch numbers,
letters, and symbols.
5
0 key
1. Input 0 in the input box.
2. Enter spaces in the input box.
3. Pressthe 0 key in the main interface to clock in the
password.
6
OK Key
1. Confirm that the option is selected.
2. In the input box, press the OK key to save the input
content.
7
Up key
Move the selection bar up.
8
Down Key
Move the selection bar down.
1.4. Display Interface
Figure 1- 4 Display Interface

Page8of50
IAM02 Time Clock User Manual
Version 1.00
2.0.Machine Mounting Method
Figure 2- 1 Machine Mounting Method
1) Mount the machine on a wall approximately 110 cm above the floor. (Based on the bottom of the
machine)
2) Positioning and punching: Remove the two screws at the bottom of the attendance machine and the
wall panel at the back of the attendance machine.
3) Fixing the wall panel: Put the expansion screw into the hole, place the wall panel in the correct position
in the perforated area, and fasten the screw into the expansion screw.
4) Fix the device: install the time and attendance machine on the wall plate and fix the screws just
removed from the bottom of the machine.

Page9of50
IAM02 Time Clock User Manual
Version 1.00
3.0. Operating Instructions
3.1. Before Using
Plug into the power cord. The machine will power on automatically.
Figure 3- 1 Machine Charge
3.2. Set User Information
There are two settings, and you can choose either one.
3.2.1.Set User Information on the Machine
1) Press the [MENU] key to enter the menu interface.
1) Press the [Down] key to select the [User], press the [OK] key to confirm to enter the user interface.
Figure 3- 2 Menu Interface
2) Select the [Enroll] and press the [OK] key to enter the enroll interface.

Page10of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 3 Enroll
3) Set the user ID in the order of 1, 2, 3 ......
Figure 3- 4 Set User ID
4) Select the [Depart], select the user department.
Figure 3- 5 Select Depart
5) Select [Name], press the [OK] key to enter the name setting interface.
Note: You can switch numbers, letters, and symbols by pressing the power key.

Page11of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 6 Select Name
Figure 3- 7 Enter Name
6) Set the user identity, and you can select [User], [Manager], and [Administrator].
Figure 3- 8 Set User Level
Note: If the user level is set to administrator or manager, when pressing the menu key, "Verify Manager…" will
be prompted. At this time, you need to enter the fingerprint of the administrator or manager/ press [0] key, input
the user id and password of the administrator or manager/ use the ID card of the administrator or manager.

Page12of50
IAM02 Time Clock User Manual
Version 1.00
7) Press the [OK] key.
Figure 3- 9 Press OK
8) To set user attendance mode, you can choose [Fingerprint], [Card], and [Password]. After the setting is
complete, enter the [User ID] again. The user can be queried, which means the user information is
successfully added.
Note: If the ID number you entered is not available, you may have missed some settings, please
re-operate from step 1.
a. Choose Fingerprint: Select the [Fingerprint], press the [OK] key, enter the fingerprint setting
interface, place the user's finger into the fingerprint box to record fingerprints three times in a row,
and select [Exit]. If you want to record the fingerprints of multiple fingers (up to 3 fingers), you
can select [Continue].
Figure 3- 10 Choose Fingerprint
Figure 3- 11 Record Fingerprints

Page13of50
IAM02 Time Clock User Manual
Version 1.00
b. Choose Card: Select the [Card], press the [OK] key to enter the card recording interface, put the
user's ID card into the card recording area, display the card number in the card recording interface,
and select [OK].
Note: You must use an ID card of 125K Hz.
Figure 3- 12 Choose Card
Figure 3- 13 Card No
Figure 3- 14 Put the ID Card

Page14of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 15 Select OK
c. Choose Password: Select the [Password], press [OK] to enter the password setting interface,
enter the user password, and select [OK].
Note: You can switch numbers, letters, and symbols by pressing the power key.
Figure 3- 16 Choose Password
Figure 3- 17 Input Password
Demo video: https://bit.ly/IAM02enroll
3.2.2.Set User Information on the Computer
Note: If you need to add more user information, the following method is recommended.
1) Refer to section 3.2.1.1 to create a user.
2) Plug the USB flash drive into the attendance machine.

Page15of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 18 Plug the USB Flash Drive
3) Press the [Down] key to select the [User] and press the [OK] key to confirm to enter the user interface.
Select the [Download User Info], press [OK], wait for 10 seconds, and the screen displays "Operation
Success!". And the user information table template is successfully downloaded.
Figure 3- 19 Download User Info
Figure 3- 20 Operation Success
4) Insert the USB flash drive into the computer, open the user information form with excel, click [Review],
click [Unprotect Sheet], input the password ["g4gIOA2i" or "7b5b3b1b3b1b3"], click [OK], and then
start editing the form to add user information, and click [Save] after editing.
Note:

Page16of50
IAM02 Time Clock User Manual
Version 1.00
The format of all users added later must be the same as the format of the first line of users. Otherwise,
the attendance machine will be unable to add the user information.
Please fill in the "/" for the FP/Card/Pwd option, which can only be set by the user on the machine.
Figure 3- 21 User Information Table
Figure 3- 22 User Information Table
5) Unplug the USB flash drive from the computer, plug it into the attendance machine again, select
[Synchronize User Info]. Wait for 10 seconds, the screen displays "Operation Successful!", and the
user information is uploaded successfully.

Page17of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 23 Synchronize User Info
Figure 3- 24 Operation Success
3.3. Set the Shift Time
3.3.1.Set the Shift Time on the Machine
1) Press the [MEUN] key to enter the menu interface.
2) Press the [Down] key to select the [Attendance Settings], press the [OK] key to confirm to enter the
attendance setting interface.
Figure 3- 25 Attendance Settings
3) Select the [Shift Time Zone], press the [OK] key to enter the shift time zone interface, and set your
shift time. You can set a maximum of 24 shift times.

Page18of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 26 Shift Time Zone
Figure 3- 27 Shift Time Zone
Demo video: https://bit.ly/IAM02ST
3.3.2.Set the Shift Time on the computer
1) Plug the USB flash drive into the attendance machine.
Figure 3- 28 Plug the USB Flash Drive
2) Press the [Down] key to select the [Attendance Settings], press the [OK] key to confirm to enter the
shift time interface. Select the [AttendSetting Download] and press the [OK] key. Wait for 10 seconds,
the screen displays "Operation Success!". And the attendance table template is successfully
downloaded.

Page19of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 29 AttendSetting Download
Figure 3- 30 Operation Success
3) Insert the USB flash drive into the computer, open the user information form with excel, click [Review],
click [Unprotect Sheet], input the password ["g4gIOA2i" or "7b5b3b1b3b1b3"], click [OK], and then
start editing the form, click [Save] after editing.
Note:
a. Shift Time Zone: Set shift time, you can set a maximum of 24 shift times.
b. Auto-Status Alteration Time Setting: Set the switching time for displaying AM In/AM
Out/PM In/PM Out in the main interface.
Figure 3- 31 Auto-Status Alteration Time Setting
c. Bell Time: Set the bell time of the attendance machine.

Page20of50
IAM02 Time Clock User Manual
Version 1.00
Figure 3- 32 Attendance Table
4) Unplug the USB flash drive from the computer, plug it into the attendance machine again, select
[AttendSetting Upload], wait for 10 seconds, and the screen shows "Operation Success!", and the shift
time information is uploaded successfully.
Figure 3- 33 AttendSetting Upload