Sven SPS-621 User manual

www.sven.fi
OPERATION
MANUAL
2.0 Multimedia Speaker System
SPS-621

2
ENG
2.0 Multimedia Speaker System
Congratulations on your purchase of the Sven speaker system!
COPYRIGHT
© 2019. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The
information in this Manual is given on «as is» terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damage which has arisen from the information
contained in this Manual.
CONTENTS
1. BUYER RECOMMENDATIONS ..................................................
.............
2. PACKAGE CONTENTS............................................................. ............
3. SAFETY PRECAUTIONS .................................................. ...................
4. TECHNICAL DESCRIPTION ....................................................
................
5. PREPARATION AND OPERATION .......................................... ......................
6. TROUBLESHOOTING.................................
...............................................
7. TECHNICAL SPECIFICATIONS .................................................... ...........
2
3
3
3
4
6
7
1. BUYER RECOMMENDATIONS
•Unpack the device carefully. Make sure there are no accessories left in the box. Check up the
device for damage; if the product was damaged during transportation, address the firm which
carried out the delivery; if the product functions incorrectly, address the dealer at once.
•Check up the package contents and availability of the warranty card. Make sure the warranty card
has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods
number corresponds to that in the warranty card. Remember: in case of warranty card loss or
discrepancy of numbers you forfeit the right for warranty repairs.
• Do not switch on the speaker system immediately after you bring it into a room from environment
with negative temperature! After unpacking, the speaker system should be kept in conditions of
room temperature for at least 4 hours.
•Before installing and using the speaker system, read this Manual carefully and keep it for future
reference.
•Shipping and transportation equipment is permitted only in the original container.
•Does not require special conditions for realization.
•Dispose of in accordance with regulations for the disposal of household and computer equipment.
Technical support is on www.sven.fi.

2. PACKAGE CONTENTS
• Speakers — 2 pcs
• Operation manual — 1 pc
• Warranty card — 1 pc
3. SAFETY PRECAUTIONS
•To avoid electric shock, do not open the MSS and do not perform repairs by yourself. Service and
repairs should be performed only by qualified specialists in an authorized service center. The list of
authorized service centers is available on www.sven.fi
•Do not allow the circuit of wires (including the grounded ones) between the speakers, on the
power amplifier or the ground, for it causes damage to the power amplifier output stage.
•Do not touch the MSS power cord plug pins for 2 seconds after unplugging it from the mains.
•Do not put foreign objects inside the holes of the MSS.
•Protect the MSS from high humidity, water and dust.
•Protect the MSS from heating: do not place it closer than 1 m from a heat source. Do not expose
it to direct sunlight.
•Do not place any open flame sources on or close to MSS.
•Do not place the MSS in poorly ventilated areas. Leave an air gap of 10 cm or more. When ope-
rating the MSS, do not put any devices on it, do not cover it with cloth or other objects preventing it
from cooling.
•Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
4. TECHNICAL DESCRIPTION
SPS-621 2.0 Multimedia Speaker System (MSS) are designed to play music and sound games,
movies, etc. The MSS has a built-in transformer power supplyallowing to connect it to virtually any
audio source (DVD-player, TV, PC, etc.). The speaker with an audio input and a control panel is
named the active one.
Special features
• Wireless signal transmission via Bluetooth module
•Headphone and microphone jacks
•Smooth timbre control
•MDF speaker cabinets
Caution! High voltage inside! To avoid the risk of electric
shock do not open or touch elements inside.
ENG
3
Operation Manual sPS-621

Fig. 2. Connection diagram
to mic input
PC
Control panel
a:headphone jack
b:microphone jack
cTREBLE: treble control knob
dBASS: bass control knob
ePOWER ON/OFF: power switch
fVOLUME: volume control knob;
AUX/BT switch mode button
5. PREPARATION AND OPERATION
Speaker placement
•Place the speakers symmetrically to the
listener at least one meter away.
•Place MSS far away from monitors and TV
sets, as insi- gnificant image distortion in these
supersensitive devices is possible.
MMOODDEE
VV OOLLUUMMEE
BASS
TREBLE
POWER
110V~230V
INPUT
Fig. 1.
a
b
c
d
e
f
MSS Connecting
SPS-621 Multimedia Speaker System can be connected to virtually any audio source: PC sound card,
mobile device, etc. (seeconnection diagram in Fig. 2).
Mobile
device
BASS
TREBLE
POWER
110V~230V
INPUT
Active speaker Passive speaker
to audio
source Power
cord
4
ENG
2.0 Multimedia Speaker System
Audio cable

• Before making any connections, make sure that the MSS is unplugged. Then connect the
speakers via the audio cable (see Fig. 2).
•Plug the built-in 3.5 mm mini-jack signal cables: connect the audio cable (green mini-jack) to the
audio output jack of your sound source and the microphone cable (pink mini-jack) – to the
microphone jack (see connection diagram, Fig. 2).
• Plug your microphone into the microphone jack b, and your headphones into the headphone
jack a.
•Plug the power cord into a mains outlet. Set the master volume level to the minimum by turning
the VOLUME control knob fcounterclockwise until it stops.
•Switch on power supply by ON/OFF switch on the active speaker rear panel.
•Select a desired signal source AUX/BT by pressing short button fon the control panel.
•Adjust the treble and bass levels by turning the TREBLE control knob cand BASS control knob d
respectively. By turning the knobs clockwise, you increase the treble/bass level; by turning the
knobs counterclockwise, you reduce it.
“Line input” Mode (AUX)
•Press button fon the front panel to switch the AUX mode. Indicator on the front panel will
change its light to red.
Bluetooth Mode (BT)
•In order to transmit signal in this mode it is necessary at first to connect the device with a signal
source (see Fig. 2). For this purpose select the Bluetooth mode using button fon the front panel.
Speaker system will enter the search mode, indicator will blink blue color.
•It is necessary to select the search mode of devices with Bluetooth on a signal source (tele-
phone, notebook, smartphone, etc.). “SVEN SPS-621” massage will be displayed on the screen,
which is to be connected to*.
•The indicator lights continuously when connection is successful. If there is no connection,
indicator will blink. In this case the system should be switched over to the search mode once again
(turn off and turn on Bluetooth mode)**.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose only the item name and the “connect” command on the source.
Note:
• After using the MSS, mind to switch it off on the active speaker rear panel by ON/OFF switch,
and unplug the power cord.
5
ENG
Operation Manual sPS-621

Fig. 3. Connection diagram audio source via Bluetooth-module
PC
BASS
TREBLE
POWER
110V~230V
INPUT
Active
speaker
Passive
speaker
Power
cord
Mobile
device
6
ENG
2.0 Multimedia Speaker System
If none of the above methods can solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound.
There is too quiet
sound of speakers.
Distortion of
sound.
Cause
The MSS isn’t connected to a mains outlet.
The power switch is off.
The volume level is set at minimum value.
Improperly connected audio source.
The volume level is set at minimum value.
Large amplitude of the input signal.
Solution
Check the connection.
Turn on the switch.
Adjust the volume control knob.
Connect audio sources correctly.
Adjust the volume control knob.
Turn down the source volume
and MSS volume.
6. TROUBLESHOOTING
Audio cable

ENG
7
Value
28 (2 × 14)
60 – 20 000
Ø 35
Ø 70
~230/50
122 × 160 × 210
5.3
Parameter, measurement unit
Output power (RMS), W
Frequency range, Hz
Speaker diameter, mm
tweeter
woofer
Power supply, V/Hz
Dimensions (one speaker) (W × H × D), mm
Weight, kg
Notes:
•Technical specifications given in this table are supplemental information and cannot give
occasion to claims.
•Technical specifications and package contents are subject to change without notice due
to the improvement of SVEN production.
7. TECHNICAL SPECIFICATIONS
Operation Manual sPS-621

Model: SPS-621
Импортер в России: ООО «РЕГАРД», 105082,
г. Москва, ул. Фридриха Энгельса, д. 75, стр. 5.
Уполномоченная организация в России: ООО «РТ-Ф»,
105082, г. Москва, ул. Фридриха Энгельса, д. 56, стр. 1.
Условия гарантийного обслуживания смотрите
в гарантийном талоне или на сайте
www.sven.fi .
Гарантийный срок: 12 мес.
Срок службы: 5 лет.
Производитель: «СВЕН ПТЕ. Лимитед»,
176 Джу Чиат Роуд, № 02-02, Сингапур, 427447.
Произведено под контролем «Свен Скандинавия
Лимитед», 48310, Финляндия, Котка,
Котолахдентие, 15. Сделано в Китае.
Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,
№ 02-02, Singapore, 427447. Produced under the
control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,
Kotka, Finland, 48310. Made in China.
® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.
2.0 Multimedia Speaker System
SPS-621