Swarovski Optik SLC 10x42 WB User manual

10
DE
11
DE
Please find our current product accessories at WWW.SWAROVSKIOPTIK.COM.
EN
SWAROVSKI
3
2
1
85
6
4
1 Focusing wheel
2 Dioptric correction
wheel
3 Twist-in eye cups
4 Protective objective
lens cap
5 Carry strap
6 Rain protection cap
7 Covering for the
tripod connection
thread
8 Snap Shot Adapter
SWAROVSKI
SWAROVSKI
3
2
7
85
6
4
1
SLC 8x30 WB
SLC 7x42 B
SLC 10x42 WB
SLC 7x50 B
SLC 8x50 B
SLC 10x50 WB
SLC 8x56 B
SLC 15x56 WB
EN
For your safety!
WARNING!
Never look at the sun with
the binocular! This leads to
injury of your eyes!
Never look through the
binocular when walking!
You could encounter ob-
stacles!
General information
Please protect your bino-
culars from jolts and jars.
Repairs should be carried
out only by authorized
workshops.
We are very pleased that you decided to
purchase this product from Swarovski Optik.
If you have any questions, please consult
your specialist dealer or contact us directly at
WWW.SWAROVSKIOPTIK.COM.

12
DE
13
DE
Attaching the lift carrying strap
Attachment without pouch or use with pouch
detached.
EN EN
Attachment with pouch hooked in on one side.
1
1
3
2
3
2
5
44
5
66
7
7
8
8
1
3
2
1
3
2
5
4
5
4
6
7
6
7
8
8

14
DE
15
DE
Operation
EN EN
Adjustment of the screw-in-type eye cups
The screw-in-type eye cups have a fully variable
adjustment to suit different eye or eyeglass posi-
tions. This enables you to adjust the distance bet-
ween your eye or eyeglass and the ocular lens to
suit your personal needs.
Use without eyeglasses:
Screw out both eye-cups
(counter-clockwise) until
you find the optimum posi-
tion.
Use with eyeglasses:
Screw in both eye cups
(clockwise) until you find
the optimum position.
Adjustment of interpupillary distance
To see a single round image, turn the two halves
of the binoculars until no irritating shadows can
be seen.
Adjustment of focusing
By turning the focusing
wheel you can focus any
object sharply at a distance
of 4.4–9.9 yds (4–9 m) to
infinity, depending on the
type of binoculars.
In the infinity position the little nose of the focusing
wheel is at the top (not available with SLC 8x30
WB).
Dioptric compensation
To achieve optimal image quality, the possibly
varying visual acuity between the left and right eye
must be corrected.
Use without eyeglasses and equal acuity of both eyes, or
with eyeglasses:
Place the dioptric correction wheel in the middle
position by simultaneously pressing and turning
it.
Use without eyeglasses and varying acuity:
1. Look through the left ocular with your left eye
and turn the focusing wheel to focus sharply on
a selected object.
2. Now look at the same object through the right
ocular with your right eye and again adjust
the dioptric correction wheel to attain optimal
clarity.

16
DE
17
DEEN EN
Both dioptric correction and focusing have been
completed for your particular visual acuity. Please
note down your personal dioptric setting – this
can be read at the edge of the dioptric correction
wheel.
Tripod connection
(not available with SLC 8x30 WB)
Unscrew the covering of the tripod connection
thread by turning it to the left (anti-clockwise).
To mount the binocular onto the tripod, you
require the tripod connection which is available
as an accessory. Regarding the SLC 15x56 WB,
the connection pin is already mounted on the
instrument.
Maintenance and Care
Lens-cleaning cloth
You can clean high sensitive lens surfaces with
the enclosed special cloth made of micro-fibres.
It is suitable for objective lens, ocular lens and
eye-glasses.
Please keep the cloth clean, as dirt can damage
the lens surface. If the cloth gets dirty, it can be
washed in luke-warm soapy water and air-dried.
Please use it exclusively for cleaning lens sur-
faces!
Cleaning
We have designed all elements and surfaces to
require little care. To ensure the long-lasting opti-
cal brilliance of your binocular, you should keep
the glass surfaces free of
dirt, oil and grease. When
cleaning the lenses, first
remove larger particles with
an optical lens brush. For
the subsequent thorough
cleaning we recommend breathing onto the lens
surface to form a coat of condensation and then
cleaning it with a soft, moist cloth.
The housing is best clean-
sed with a soft, moist cloth
(don’t use the lens-cleaning
cloth).
In the event of hard-to
remove dirt (e.g. sand), the
eye-cup can be unscrewed.
The ocular can then be
cleaned easily.
Storage
You should keep your binocular in its bag in a well-
ventilated, dry place.
If the instrument is wet,
it must be dried prior to
storage.
In tropical regions or regi-
ons with a high degree of
humidity the best place to
store the instrument in is an air-tight receptacle
along with a moisture-absorbing agent (e.g. silica
gel).
All data are typical values.
We reserve the right to make changes
regarding design and delivery. BA-643/3, 05/2008