Swiss Madison Calice User manual

INSTALLATION
INSTRUCTIONS
Swiss Madison
              
Calice Two-Piece Toilet
www.swissmadison.com | 1-434-623-4766 | [email protected]om
Share your pictures for a feature!
using #SwissMadison

Prior to Installation:
If you have any questions or concerns please contact us:
Inspect toilet to ensure no damages have occurred while in shipping.
Observe all plumbing and building codes in accordance with your state and local requirements.
Remove old toilet.
Make sure mounting surface is CLEAN and LEVEL
1-434-623-4766
[email protected]om
General Recommendations: Read installation and maintenance instructions thoroughly before installing the toilet.
Be sure to use proper tools and always wear proper personal safety accessories for your protection.
—1 —

—2 —
Thank you for purchasing a Swiss Madison Two-Piece Toilet.
We appreciate your business and know you will enjoy your toilet for many years to come.
If you have any questions or require assistance we would be happy to help,
please contact us at 1-434-6234766 or [email protected].
Thank you for your purchase
www.swissmadison.com
To learn more about our products, please visit:
Sincerely,
The Swiss Madison Team

TWO-PIECE TOILET ROUGHING-IN DIMENSIONS
—3 —
NOTE: Specialized tools may be necessary to install Swiss Madison Two-Piece Toilet, plumbing not included.
SUGGESTED TOOLS AND MATERIALS
33.07”
15.40”
17.5”6.5”
15.40”
5.9”
16.14”
25.6”
7”
NOTE: Distance from wall to closest ange centerline must be listed as below.
Safety Glasses
Level
Tape Measure
Screwdriver
Putty Knife
Hacksaw
Swiss One-Piece Toilet Bolts
PARTS LIST
Metal File
Pipe Wrench Tubing Cutter Pencil

TWO-PIECE TOILET INSTALLATION INSTRUCTIONS
1. Read the complete instruction manual before beginning installation.
2. Conrm that your model will t in intended location and plumbing xtures are located where
legally required before beginning installation.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4. Two people are recommended to install and move this product.
5. Product is FRAGILE! To avoid breakage and possible injury handle with care and avoid over
tightening bolts and nuts.
6. Fill valve has been factory-tightened to design specications. If re-tightening required, use a
wrench a tighten one turn past nger tight.
7. Make sure the supply pressure is a minimum of 35 psi (2.5kg/cm³), the toilet will not function
properly without minimum water pressure.
—4 —
The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Two-Piece Toilet.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
1. Remove Old Toilet
Close toilet supply valve and ush tank completely, use towel or sponge to remove excess water.
Disconnect and remove supply line, if you are replacing the valve shut o the main water supply rst.
Remove old mounting hardware, remove toilet and plug waste opening to prevent escaping gas.
Remove closet bolts from ange and clean away old wax, putty, etc. from base area.
2. Identify Outlet Installation Type
For wall-outlet installation, place the pipe
ttings as shown above.
For oor-outlet installation, place the pipe
ttings as shown above.

—5 —
NOTE: Drawings may not exactly dene contour of china.
3. Connect Supply Hose
Thread the supply hose onto the tank.
4. Attach Gasket
Position the gasket on the bowl inlet.
5. Position Tank onto Bowl
Holes should line up so threaded rod can t smoothly connecting the cistern body to the bow.

Rubber Washer
NOTE: Drawings may not exactly dene contour of china.
7. Secure Tank to Bowl
Slide the metal washer and the rubber washer onto the bolt.
Thread the bolts into the bottom of the tank tighten the bolts using a screwdriver.
NOTE: Do not over tighten! Over tightening can lead to the ceramic cracking.
8. Position Toilet
Metal
Washer Bolt
—6 —
9. Drill Holes
Remove the toilet and measure the thickness of the bowl.
Apply that measurement in towards the center from the
marks you made on the oor as shown then drill.
Drill holes into the locations on wall marked from tank.
Thickness of the toilet
bowl measurement
edge of the
toilet marking
Position toilet into desired place and make sure it
is level.
Using a pencil mark the location of the holes
inside the tank onto the wall.
Draw one line around the base of the toilet and
one perpendicular from the holes located on both
sides of the bowl.

—7 —
NOTE: Drawings may not exactly dene contour of china.
10. Install Hardware
Install brackets onto oor.
Install anchors into all pre-drilled locations.
11 ⁄”
⁄”NPT Supply
Anchor
⁄”
⁄”
12. Secure Tank
Using screws and washers ax the tank to the wall.
Tighten to secure into place, do not over tighten.
13. Connect Plumbing
Connect water supply and turn on water.
11. Secure Toilet
Return toilet to desired location.
Carefully thread the bolts onto the nuts on the bracket.
Tighten to secure into place, do not over tighten.
⁄”Supply

—7 —
NOTE: Drawings may not exactly dene contour of china.
15. Check for Leaks
Flush several times and check for leaks.
14. Connect Push Button
Unscrew the big white nut on the push button and insert the button into the hole on the tank.
When the rods meet the push buttons, measure the height (H) with a ruler.
Unscrew the rods and cut the part H on both rods.
Insert the rods back and tighten the small nut.
Tighten th big nut from the inside of the tank.
Push Button
Rubber Sleeve
Small Nut HTank Cover

16. Install Toilet Seat
Insert threaded rubber piece into
holes on top of toilet.
Place seat hardware over where you inserted the
threaded rubber pieces.
Place washer onto screw then thread screw through the seat hardware into the rubber piece.
Before you fully screw in hardware, be sure to test position by placing the seat on top and making
adjustments if needed.
Add cover caps over top of seat hardware. Pop on your quick-release seat.
—8 —
NOTE: Drawings may not exactly dene contour of china.
®

Swiss Madison® products are made with quality materials and excellent craftsmanship to provide the
customers a long lasting product. In the case of any defects in materials or craftsmanship under regular
use were inspected in the rst year of purchase, Swiss Madison® will provide replacement parts at no
charge, or at its option, replace any product or part of the product that is deemed defective, under
normal installation, use, service and maintenance. This warranty applies only to the original purchaser.
Proof of purchase will be required in the case of a claim.
Swiss Madison® recommends the installations to be made by a licensed, professional plumber.
Swiss Madison® will not be held responsible for any damage or product failure due to improper
installation, misuse, or failure to use a licensed professional. Swiss Madison® is not responsible for any
removal or installation cost.
This One Year Limited Warranty will be voided if:
•The installation recommendations were not followed.
•The product has been moved from it’s initial place of installation.
•The product has been modied.
•The product has been subjected to improper maintenance, abuse, misuse, excessive use of
chemicals, accident or other damages.
Swiss Madison® makes no implication that products comply with any or all local building or plumbing
codes. It is the consumer’s responsibility to determine local code compliance. This warranty extends to
the original purchaser and rst consumer.
Swiss Madison® is not liable for any incidental, consequential or special damages associated with the
return, replacement, installation or use of your product. This includes freight costs, labor, travel time, lost
prot, home damages and other contingent liabilities and costs (including, without limitation, costs
associated with experts, investigations, analyses, attorneys and other professionals and services).
The Swiss Madison® warranty is a comprehensive and explicit limit of liability, and all items outside of it
are not addressable by or the responsibility of Swiss Madison®. Certain states have variances regarding
implied warranties and in those situations we remain fully compliant.
In the case of any questions or a claim contact us directly at 1-434-MADISON (623-4766).
WARNING: Content may contain sharp and other possibly harmful pieces and may cause hazard to
children and adults, Swiss Madison® is not responsible in any way for personal damage.
ONE YEAR LIMITED WARRANTY
1-434-MADISON
(623-4766)
19 Stults Rd., Dayton, NJ 08810
www.swissmadison.com
S wiss M adison
              
®