Symmons Ballina 522HS Manual

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3088 REV 0 09/18/14
522HS, 522SA
Ballina™Hand Shower/Shower Arm
Operation & Maintenance Manual
Model Numbers Specifications
522HS Hand Shower Assembly
522SA Shower Arm
Hand shower assembly includes 3 mode hand shower
with standard 2.5 gpm (9.5 L/min) ow restrictor. Hand
shower assembly and shower arm components are made
from metal and nonmetallic materials plated in standard
polished chrome nish.
Modifications Compliance
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-BBZ Brushed bronze finish
-STN Satin nickel finish
Note: Append appropriate -sufx to model number.
-ASME A112.18.1; CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Modifications
A
B
B
AC
C
D
D
522HS
522SA
Note: Dimensions are subject to change without notice.
Measurements
A Ø 2 1/2", 64 mm
B1/2" IPS thread must protrude
1/2" from nished wall
C 2 1/4", 57 mm
D 7 1/2", 191 mm
c

2Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3088 REV 0 09/18/14
Replacement Parts
Item Description Part Number
A Hand Shower 412W
B Cradle T-635
C
D
Vacuum Breaker
60" Hose EF-104
E Shower Arm 522SA
Notes:
1) Append -BBZ to part number for brushed bronze
nish; -STN for satin nickel.
2) Append -1.5 or -2.0 to hand shower for low ow.
Required for Installation
Adjustable wrench
Plumber tape
E
A
522HS
522SA
B
C
D

3
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
Installation Operation
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3088 REV 0 09/18/14
1) Install wall elbow (B) to pipe
tting. Turn clockwise to tighten.
2) Attach large end of hand shower
hose (D) to hand shower (A).
3) Attach small end of hand shower
hose (D) and gasket to in-line
vacuum breaker (C). Connect in-line
vacuum breaker to wall elbow (B).
Turn clockwise to tighten.
4) Attach shower arm (E) to vertical
shower pipe. Turn clockwise to
tighten.
1
2
B
1
2
D
A
3
4
B
C
D
1
2
E