Symmons DS Creations 0600-TB-18 User manual

DS Creations
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
0600-TB-18 (CD0600-3TB-18)
18" Vanity Mounted Towel Bar
Installation Guide
0600-TB-18
18" Vanity Mounted Towel Bar
18" Vanity Towel Bar shall be made from metal construction,
plated in standard polished chrome nish.
Dimensions
Measurements
A 18", 457 mm
B 3-7/16", 87 mm
C Ø 5/8",16 mm
D (2x) Ø 2-1/4", 57 mm
E(4x) Hole Size
Ø 5/16", 8 mm
F 13/16", 21 mm
Note: Dimensions subject to change without notice.
DD
C
C
A
AB
B
EE
F
F

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2018 Symmons Industries, Inc. ■symmons.com ■[email protected] ■ZV-2470 REV B ■ 050818
Parts Breakdown
C
B
A
A
B
B
Tools Required for Installation
Allen Wrench:
2 mm
Drill
Phillips Head
Screwdriver
Silicone
Replacement Parts
Item Description Part Number
A
B
C
Mounting Screws
Drywall Anchors
Anchor Tool
HW-03141
Notes:
1) For drywall 1/2 inch thick or less, insert anchor tool (C) into
drywall anchor (B) to secure behind wall prior to installing trim.
2) Apply a bead of silicone around the perimeter of trim installed
ush to nished wall.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.