Symmons Duro SK3610PO Manual

Model Numbers Feature Highlights
☐SK3610PO Pull-Out Kitchen Faucet • Pull-Out Kitchen Faucet shall include single hole
mount configuration
• Ceramic cartridge
• Braided hose connections
• Standard 1.0 gpm (3.8 L/min) flow rate
• Faucet shall be made from metal construction
• Plated in standard polished chrome finish
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372
Dimensions
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
SK3610PO
Pull-Out Kitchen Faucet
Operation & Maintenance Manual
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2023 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3747 REV 0 ■ 060623
Duro®
c
WARNING: This product can expose you to
chemicals including lead, which is known to the
state of California to cause cancer, birth defects, or
other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
Measurements
FDeck Thickness Ref.
Max. 2-1/2", 64 mm
G
Hole Size
Min. Ø 1-3/8", 35 mm
Max. Ø 1-1/2", 38 mm
JTo Backsplash
4", 102 mm
Notes:
1) Hoses removed for clarity.
2) Dimensions subject to change without notice.
FF GG
JJ

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2023 Symmons Industries, Inc. ■symmons.com ■[email protected] ■ZV-3747 REV 0 ■ 060623
Parts Breakdown
Replacement Parts
Item Description Part Number
A Pull-Out Wand RK-026
B Pull-Out Wand Hose RK-032
C Cartridge KN-4
D
E
F
Plug Button
Set Screw
Handle
RK-027
G
H
I
Mounting Washer
Mounting Nut
Mounting Screws
RK-028
2
1
A
B
C
D
E
F
G
H
I
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2.5 mm)
Phillips Head
Screwdriver
Plumber Tape
Silicone
Installation Notes:
1) Apply a bead of clear silicone around the perimeter of all
faucet trim installed to deck surface.
2) Apply plumber tape to threaded connections as necessary.
DO NOT use plumber tape on ttings with face seal washers
or o-rings.
3) DO NOT OVERTIGHTEN ttings with face seal washers or
o-rings.
*Note: Append appropriate -sufx to repair part
number for premium nish.