Symmons Ballina Trim Series Manual

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3065 REV A 09/18/14
5203-TRM, 5205-TRM, 5206-TRM
Ballina™Trim Series
Operation & Maintenance Manual
Model Numbers Specifications
5203-TRM Valve Trim with Hand Shower
5205-TRM Shower Trim with Hand Shower
5206-TRM Tub/Shower Trim with Hand Shower
Tub/shower trim with hand shower and lever handle
includes wall connection, cradle for hand shower
mounting, in-line vacuum breaker, exible metal
hose, non-diverter tub spout, 3 mode hand shower and
3 mode showerhead with standard 2.5 gpm (9.5 L/min)
ow restrictor. Shower trim with hand shower and lever
handle includes all of the above less non-diverter tub
spout. Valve trim with hand shower and lever handle
includes all of the above less non-diverter tub spout
and 3 mode showerhead. Components made from
metal and nonmetallic materials plated in standard
polished chrome nish.
Modifications Compliance
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-412HSB 30" slide bar in place of wall cradle on
hand shower units
-BBZ Brushed bronze finish
-STN Satin nickel finish
-ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.
c

2
Dimensions
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3065 REV A 09/18/14
Measurements
A Ø 2 1/2", 64 mm
B 10 5/8", 268 mm
C 5 1/4", 132 mm
D1/2" IPS thread must protrude
1/2" from nished wall
E 6", 152 mm right or left
F 77", 1956 mm
G Ø 7 1/2", 191 mm
H Ø 5", 127 mm
I 8", 203 mm
J 3 3/4", 95 mm
K4 3/4", 121 mm (5206-TRM)
4 7/8", 124 mm (5205-TRM)
L32", 813 mm (5206)
45", 1143 mm (5203, 5205)
M 12", 305 mm
N 3", 76 mm
O 4 1/8", 105 mm
P 7", 178 mm
Q(Rough in)
2 3/8" ± 1/2", 60 mm ± 13 mm
R 1/2", 13 mm
S 1/2" NPT
Notes:
1) All dimensions measured from nominal rough-in (see Q as reference).
2) Dimensions are subject to change without notice.
A
A
C
C
H
H
G
G
A
A
L
L
M
M
F
F
B
B
D
D
K
K
I
I
N
N
O
O
J
J
Q
Q
R
R
P
P
S
S
E
E
Floor
Floor

3
Parts Breakdown
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3065 REV A 09/18/14
Replacement Parts
Item Description Part Number
A Hand Shower 412W
B Cradle T-635
C
F
Vacuum Breaker
60" Hose EF-104
D Showerhead 412SH
E Shower Arm T-637
G
H
Diverter Handle
Set Screw T-629
I Dome Cover T-633
J
K
L
Diverter Escutcheon
Mounting Screws
Mounting Plate
T-634-NS-K001
M
N
Shower Handle
Set Screw T-660
K
O
P
Mounting Screws
Shower Escutcheon
Mounting Plate
T-631-NS-K001
Q Tub Spout 522TS
Notes:
1) Append -STN to part number for satin nickel nish,
-BBZ for brushed bronze.
2) Append -1.5 or -2.0 to showerhead or hand shower
for low ow.
Required for Installation
Adjustable wrench
Phillips head screwdriver
Allen wrench (1/8")
Plumber tape
N
H
E
A
B
C
F
G
J
D
L
O
K
P
Q
I
I
M
K

4
Installation
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3065 REV A 09/18/14
Note:
For valve body installation, please
see valve body installation guides.
1) Install small plastic mounting
plate (L) to diverter valve (5206
diverter valve = 4-460E-BODY,
5205 diverter valve =
4-458E-BODY) and large plastic
mounting plate (P) to shower valve
(4000-BODY). Secure each with
two screws (K).
2) Attach diverter escutcheon (J) to
small plastic mounting plate (L).
Note: Tabs should snap into place.
3) Attach shower escutcheon (O) to
large plastic mounting plate (P).
Note: Tabs should snap into place.
4) Install dome covers (I) to valves
by turning clockwise.
5) Install diverter handle (5205
and 5206 only) (G) and shower
handle (M) to valves. Secure
handles by tightening set
screws (H) and (N).
Note: Handles should be facing the
6 o'clock position.
6) Install tub spout (Q) to pipe
tting. Turn clockwise to secure.
1
1
2
L
K
K
P
1
2
L
J
L
OP
1
1
2
I
I
1
1
2
G
M
H
N

5Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3065 REV A 09/18/14
7) Install cradle (B) to pipe tting.
Turn clockwise to tighten.
8) Attach shower arm (E) to vertical
shower pipe. Turn clockwise to
tighten.
9) Install showerhead (D) to shower
arm (E). Turn clockwise to tighten.
10) Attach large end of hand
shower hose (F) to hand
shower (A). Attach small end
of hand shower hose (F) and
gasket to in-line vacuum
breaker (C). Connect in-line
vacuum breaker to cradle (B).
Turn clockwise to tighten.
1
2
B
1
2
D
E
3
1
4
2
F
A
B
C
F
1
2
E
Installation

6Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3065 REV A 09/18/14
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
1) Turn shower handle counterclockwise approximately
1/4 turn to put valve in cold position.
2) Turn shower handle counterclockwise approximately
1/2 turn to put valve in warm position.
3) Turn shower handle counterclockwise approximately
3/4 turn to put valve in hot position.
1) Diverter handle facing straight down is for diverter
function 1.
2) 5203-TRM & 5205-TRM: Turn diverter handle
counterclockwise one full revolution for diverter
function 2.
5206-TRM: Turn diverter handle counterclockwise 1/4
turn for diverter function 2.
3) 5206-TRM: Turn diverter handle counterclockwise 3/4
turn for diverter function 3.
Operation
Temperature Control Diverter Control
5205-TRM 5206-TRM