Symmons Safetymix 1-400 series User manual

For ADA compliance (Americans with Disabilities Act) consult ADAAG or your state reg-
ulations for proper product choice and mounting heights. ADAAG does permit a fixed
shower head mounted 48” above the floor in unmonitored facilities where vandalism
may be a problem.
Recommended head heights
Men ____________________________ 6’0”
Boys, Senior High _________________ 5’10”
Boys, Junior High _________________ 5’7”
Boys, Elementary _________________ 5’4”
Women _________________________ 5’8”
Girls, Senior High _________________ 5’8”
Girls, Junior High _________________ 5’5”
Girls, Elementary__________________ 4’2”
INSTALLATION:
1. Install riser into valve body and
head bracket.
2. Install 32" risers to water supply
and then attach union to risers
and valve body.
3. Mount valve body and head
bracket to the wall.
1-400 Series
1-500 Series
INSTALLATION INSTRUC-
TIONS
Product meets ANSI A112.18.1M
Flow rate: 2.5 gpm (9.5 L/min)
1-400
20”
508mm
1-500
18 ¾”
476mm
Safetymix®

IH-2 (4)
IH-2 (4)
SCE-32 (2)
SCE-20
SC-15A
SC-18PL
HP-10
HP-10A
SC-13BPL
SC-13C
RC-14
SC-7
SC-2
C-5
SC-17
SC-26
SC-19
SC-11
SC-10A
SC-10
SC-9
SC-3
CE-12A
CE-26A (2)
CE-26 (2)
CE-27 (2)
CE-25 (2)
4-445 (1-500)
4-285 (1-500)
CE-12C
CE-12H
4-430 (1-400)
4-282 (1-400)
INDIVIDUAL PARTS INDIVIDUAL PARTS COMPOSITE PARTS
CE-12A Lightwall Flange
CE-12C Wall Flange Nut
CE-12H Heavy Duty Wall Flange
CE-25 Stop body(chrome plated) (2)
CE-26 Cap(chrome plated) (2)
CE-26A Cap(chrome plated) (2)
CE-27 Spindle assembly (2)
IH-2 Woodscrew (4)
HP-10 Body cover
HP-10A O-ring
RC-14 Handle
SC-13BPL Dome cover
SC-13C Dial
SC-15A Set screw
SC-18PL Hot washer screw
SC-3 Renewable seat
SC-7 Packing nut
SC-9 Cold washer retainer
SC-10 Hot washer
SC-10A Screws
SC-11 Cold washer
SC-17 Packing
SC-19 Cap gasket
SCE-20 20” riser pipe
SCE-32 32” riser pipe (2)
4-282 Fre-flo showerhead (1-400)
4-285 Fre-flo showerhead, rigid (1-500)
4-430 Short head bracket (1-400)
4-445 Extended head bracket (1-500)
C-5 Spindle assembly
C-50 Renewable seat socket wrench
KIT-B Washer and gasket kit
SC-2 Cap assembly
SC-3 Renewable seat unit complete
Tools required for installation:
Slotted screwdriver, Phillips screwdriver,
soldering equipment, adjustable wrench,
channel lock pliers, hex socket keys (1/8”
and 3/32”), electric drill with 1/4” drill bit,
HY-50 screwdriver (provided)
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184
Phone: [phone] ■Fax: [phone]
Website: www.symmons.com ■Email: [email protected]
©2007-2015 Symmons Industries, Inc. Printed in U.S.A. ■ZV-493 REV A ■010815