Symmons Duro 361TS Manual

Duro®
Model Numbers Specification
361TS
Non-Tub Spout
Operation & Maintenance Manual
☐361TS Non-Diverter Tub Spout
Dimensions
Note: Dimensions subject to change without notice.
B
A
E
C
D
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Warranty
Note: Append appropriate -sufx to model number.
Options/Modifications
☐-STN Satin Nickel finish
• 6" length
• Thread on installation
• Metal construction plated in standard polished chrome
nish
Compliance
-ASME A112.18.1/CSA B125.1
Measurements
A 2-1/4", 57 mm
B 3/8", 10 mm
C
Female 1/2-14 NPT tting must
be recessed 3/8" (10 mm)
from nished wall
D 2-3/4", 70 mm
E 6", 152 mm

For California Residents
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2018 Symmons Industries, Inc. ■symmons.com ■[email protected] ■ZV-3018 REV D ■ 011118
Installation (361TS)
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
Tools Required
Plumber Tape
Allen Wrench
(included)
2
2
B
B
A
1
1
3
33
1) Loosen screws (B) and adjust
mounting plate (A) to desired
position. Secure mounting plate (A)
with screws (B).
2) Install non-diverter tub spout (C)
to pipe tting. Turn clockwise to
secure.
2
C
1