Synco MIC-D2 User manual

Thank you for choosing SYNCO Mic-D2,
Please read this manual carefully before use and follow all instructions mentioned herein.
MIC-D2 Microphone User Manual
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
[e-mail]
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd

Package List.....................................................................................................................................1
Feature Introduction.......................................................................................................................2
Caring For Your SYNCO Mic-D2 Microphone................................................................................2
Mounting the Shotgun Mic............................................................................................................4
Speci󽗉cations..................................................................................................................................3
① Polar Pattern
② Frequency Response
③ Performance Parameter
Warranty...........................................................................................................................................5
Contents

1www.syncoaudio.com www.syncoaudio.com 2
Feature Introduction
Package List
Caring For Your SYNCO Mic-D2 Microphone
Shotgun Directional Microphone with High Sensitivity
Hyper Cardioid Pattern, Great Pickup E󽗈ect
Solid Brass Body, Highly Anti-Interference
Extremely Low Self-Noise
Ultra-󽗊at Frequency Response
3-Pin XLR Connector
Wide Usage Occasions
Mini MIC Holder with 3/8” and 5/8” Connector
Original Sound Reproduction
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics
damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
SYNCO Mic-D2 Microphone x1
Mic Holder
with 5/8"-3/8" Connector x1
XLRM-XLRF Cable x1
User Manual x1
Protection Box x1
Windscreen x1
(Package includes the following items)
User Manual

3www.syncoaudio.com www.syncoaudio.com 4
1. The MIC-D2 microphone can be mounted on a
boom pole or tripod through a mini holder with
3/8" and 5/8" connector.
2. A cotton windshield will minimize the
environmental noise when shooting videos.
3. A 19.7 inches XLRM - XLRF cable connecting the
mic to other equipments.
4. Mount on a camcorder
Mounting the Shotgun Mic
1. Polar Pattern: Hyper Cardioid
Speci󽗉cations
2. Frequency Response
20
-70
-60
-50
-40
-30
-20
50 100 200 5001 K2 K5 K 10K 20K
Element
Polar Pattern
Frequency Response
Bass
Sensitivity
Output Impedance
Max.Input SPL
Signal to Noise Ratio
Dynamic Range
Back Electret Condenser
Hyper-Cardioid
20Hz-20kHz
Built-in
-32dB±3dB（1dB=1V/Pa at 1kHz）
450Ω±20%（at 1kHz）
130dB（T.H.D≤1% at 1kHz）
80dB（1KHz at 1Pa）
117dB（1kHz at Max SPL）
3. Performance Parameter

5www.syncoaudio.com www.syncoaudio.com 6
WARRANTY
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the
product under normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to 24-month limited warranty service. The warranty period begins
on the date of purchase of brand new, unused products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to material defection or
technological problem, the defective product or defective part will be repaired or replaced without charge
(service and materials fee).
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its operation speci󽗉cation
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Modi󽗉cations to a product by its user or a third party without prior written consent of SYNCO, e.g.
replacement of element or circuit, label alteration
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact a local agent for
assistance, or you can always contact SYNCO’s customer service through email at
[e-mail].
Please retain your sales receipt and warranty certi󽗉cate as proof of purchase. If any of these documents
is missing, only sales return or chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.
Power Requirements
Weight
Body Dimensions
Output Interface
48V DC ，2mA
165g
0.75*9.84 inches
XLRM
The code on product is inconsistent with that of warranty certi󽗉cate, or the code on the product or
warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈, battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us via Email：
[e-mail]
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)