Synco Mic-M2S User manual

Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.
Microphone Mic-M2S User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Remove the battery for long time storage.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
1. The Use of Wind Mu󽗈
Operations
Please install the wind mu󽗈 to the microphone for wind noise suppression.
2. The Use of Microphone
1) Attach the shock mount to your
device via the cold shoe or 1/4” screw
hole on the bottom of the shock mount.
2) Mount the microphone onto the shock
mount, and connect the microphone with
your device via the 3.5mm TRS camera cable
or the 3.5mm TRRS phone cable.
4. Battery Replacement
SYNCO Mic-M2S uses a replaceable AAA battery. Please install or replace the
battery as shown below.
3. Indicator Instruction
3) Turn on the microphone and run the audio/video recording application in
your device.
Indicator
Microphone Status
Green
Power On
Blue
Low-cut Function On
Speci󽗉cations
1. Polar Pattern: Cardioid

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
[e-mail]
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us
via Email：[e-mail]
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation speci󽗉cation
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact
a local agent for assistance, or you can always contact SYNCO’s customer
service through email at
[e-mail].
Please retain your sales receipt and warranty certi󽗉cate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Transducer
Frequency Response
Dynamic Range (Typical)
Signal/Noise
Maximum SPL
Sensitivity
Power Requirement
Output Connector
Battery Life
Dimensions (L x Diam)
Weight
Electret Condenser
35Hz-18KHz
90dB
76dB
120dB
-35dB±3dB/ 0dB=1V/Pa,1KHz
AAA Battery x 1
3.5mm TRS
100H
90×20.5mm
32g
2. Performance Parameter
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to material
defection or technological problem, the defective product or defective part will
be repaired or replaced without charge (service and materials fee).
Warranty
Modi󽗉cations to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certi󽗉cate, or the
code on the product or warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈, battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.