Synco WMic-T1 User manual

Thank you for choosing SYNCO WMic-T1,
Please read this manual carefully before use and follow all instructions mentioned herein.
WMic-T1 Microphone User Manual
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
[e-mail]
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd

Package List.....................................................................................................................................1
Feature Introduction.......................................................................................................................2
Caring For Your SYNCO WMic-T1 Microphone.............................................................................2
Components Introduction.............................................................................................................3
How to Install the Batteries............................................................................................................4
Indicator Light..................................................................................................................................4
Operation and Usage......................................................................................................................5
Speci󽗉cations..................................................................................................................................6
Warranty...........................................................................................................................................8
Contents

1www.syncoaudio.com www.syncoaudio.com 2
Feature Introduction
Package List
Caring For Your SYNCO WMic-T1 Microphone
UHF wireless transmission, high-󽗉delity sound;
Real-time noise reduction, ensuring a higher signal-to-noise ratio;
Compatible with smartphones, digital SLR cameras, camcorders, recorders, personal computers;
Audio processing chip, minimizing noise in wireless transmission system；
16 switchable channels for recording without environmental interference;
Adjustable volume;
Di󽗈erent status lights for real-time checking；
Both the receiver and transmitter are powered by two AA batteries;
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Transmitter x1
Lavalier Mic x1
3.5mm TRS Output Cable x1Receiver x1
User Manual x1Belt Clip x2Storage Bag x1 Cold Shoe Adapter x1
3.5mm TRRS Output Cable x1
(Package includes the following items)
User Manual

3www.syncoaudio.com www.syncoaudio.com 4
1. Battery Requirement: 2pcs * AA batteries
2. Press the two clips to open the receiver/transmitter battery cover
3. Insert two batteries according to the positive and negative electrode
4. Close the battery cover
Components Introduction How to Install the Batteries?
Indicator Light
① Antenna
② Battery Indicator
④ 3.5mm Mic Input
Port
⑤ Channel Button
⑥ Volume Button
① Antenna
② Battery Indicator
③ 3.5mm Audio
Output Port
⑤ Channel Button
⑥ Volume Button
⑦ Screen Display
⑧ Transmitting Status
Light
⑩ Power Button
⑪ Battery Cover
⑫ Belt Clip
⑦ Screen Display
⑨ Receiving Status Light
⑩ Power Button
⑪ Battery Cover
⑫ Belt Clip
⑬ Cold Shoe Adapter
Transmitter Receiver
Receiver
Green Light Flickers(b)
Red Light Keeps on(a)
Red Light Flickers(a)
Green Light Flickers(b)
Red Light Flickers
Sound Input
Channel Matches
Audio Distortion
Sound Input
Low Battery Power
Transmitter
Battery Indicator

5www.syncoaudio.com www.syncoaudio.com 6
Operation and Usage
Receiver
① Attach the cold shoe adapter to the receiver, and mount it on the camera/photographic equipment.
② Plug one end of the 3.5mm audio cable into the receiver's "LINE OUT" socket and the other end into
the camera's "MIC" interface.
③ Push the power button to turn on the device.
Transmitter
① Insert the lavalier mic into MIC socket of the transmitter.
② Push the power button to turn on the device.
③ Clip the receiver on your belt or put it in the pocket.
Long press “Channel” button, to change channel number.
Press “Volume” button to adjust the sound volume.
Speci󽗉cations
Channel
Frequency Range
Oscillation Mode
Working Distance
Transmit Power
Carrier Frequency
Error
SNR
Harmonic Radiation
Modulation Mode
Maximum Frequency
Deviation
Dynamic Range
Antenna
16
572MHz-586MHz
PLL Frequency Synthesis
≥50m
13.5dBm
0.005%
>70dB
-32dBm
FSK
± 65KHz
92 dB
1/4 Wavelength Wire
Antenna
Transmitter
Maximum Input Level
Input Impedance
Input Gain Adjustment
Audio Output
Battery
Dimensions
Net Weight
Working Temp.
Storage Temp.
250mV
2.2KΩ
1-5 levels adjustable
3.5mm
AA 1.5V x 2, 120mA
96x60x18.8 (mm)
55g (without battery)
0℃ ~ +50℃
-20℃ ~ 60℃

7www.syncoaudio.com www.syncoaudio.com 8
WARRANTY
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the
product under normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins
on the date of purchase of brand new, unused products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to material defection or
technological problem, the defective product or defective part will be repaired or replaced without charge
(service and materials fee).
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its operation speci󽗉cation
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Modi󽗉cations to a product by its user or a third party without prior written consent of SYNCO, e.g.
replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certi󽗉cate, or the code on the product or
warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈, battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
Channel
Frequency Range
Oscillation Mode
Receiving Mode
Working Distance
SNR
Dynamic Range
Received Power
Image Rejection
Antenna
Noise Control
RF Sensitivity
Output Level Range
Frequency Setting
16
572MHz-586MHz
PLL Frequency Synthesis
Superheterodyne
≥50m
>70dB
92 dB
13.5dBm
45dBm
1/4 Wavelength Wire
Antenna
Built-in Setting Parameters
When inputting 10dBu,
S/N ≥ 45dB
1-5 levels adjustable
Manual IR Sync
Receiver
Audio Output
Output Impedance
Battery
Dimensions
Net Weight
Working Temp.
Storage Temp.
3.5mm
400Ω
AA 1.5V x 2
96x60x18.8 (mm)
55g (without battery)
0℃ ~ +50℃
-20℃ ~ 60℃

9www.syncoaudio.com
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us via Email：
[e-mail]
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please contact a local agent for
assistance, or you can always contact SYNCO’s customer service through email at
[e-mail].
Please retain your sales receipt and warranty certi󽗉cate as proof of purchase. If any of these documents
is missing, only sales return or chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.