Synco G2 (A1) User manual
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G2(A1) User Manual
Specications
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Audio Input Level
RF Output Power
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1/8" / 3.5mm TRS Mic Input
1V (0dBV)
＜10mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
TX Transmitter
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind mu,
battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).
Warranty
Wireless Transmission
RF Frequency Band
Approximate RF Sensitivity
Working Distance
Mounting
Number of Audio Channels
Audio Output
Gain
Audio Output Level
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
-81dBm
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1
1/8" / 3.5mm TRS Mic Output
1/8" / 3.5mm TRS Headphone Output
0-5 Level
Line Out: 1V; Monitoring: 25-30mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
Built-in/External Mic
Mono
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
135dB SPL (at 1KHz)
RX Receiver
Microphone
Adjust the recording level of inbuilt mics for Canon Camera (Take EOS
5D Mark Ⅳ for example)
SHOOT4:Movie
AF
123 4
5
MovieServoAF
AFmethod
Griddisplay
Movierecquality
Soundrecording
MovieServoAFspeed
MovieServoAFtracksens
Manual
-
0
Enable
+Tracking
FHD IP B50.00 P MOV
1
Adjust the recording level of inbuilt mics for Panasonic Camera (Take
LUMIX GH5 for example)
3/4
Stabilizer
FlkrDecrease OFF
OFF
0dB
Ex.TeleConv.
Digital
Picture
Time
Miclevel
MiclevelAdj.
DISP
.
X
Adjustthesound
inputlevel
1
MicLevelAdj.
-3dB
Set
L
-12 0
R
-12 -6 +6±0
2
Soundrecording
Soundrec.Manual
Rec.level
-dB40120
MENU
L
R
2
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera (Take A7S Ⅱ
for example)
123456789
SteadyShot
SteadyShotSettings
ColorSpace
AutoSlowShut
AudioRecording
AudioRecLevel
On
sRGB
On
On
MENU
1
AudioRecLevel
SelectAdjustExit
-20 -3 0dB
CH1
CH2
Reset
15
2
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Caring For Your SYNCO Product
Package List
Product Instruction
TX Transmitter
Display Screen
RX Receiver
① External Mic Input
② USB-C Port
③ Power(MUTE)
④ Reset(Help with Eject Pin)
⑤ Low Cut
① USB-C Port
② Power (MUTE)
③ Reset(Help with Eject Pin)
④ Gain Control
⑤ Pairing
⑥ Pairing
⑦ Built-in Mic
⑧ Display Screen
⑨ Pocket Clip
⑥ 3.5mm Audio Output
⑦ 3.5mm Monitoring Jack
⑧ Display Screen
⑨ Pocket Clip
TX Transmitter
RX Receiver
Operations
TX
RX
1.Power/ Mute
1.Power/ Mute
3.External Mic Input
4.Mic Windshield & Device Installation
5.Reset
6.Low Cut
7.Pairing
2.Charging
Note:
2.Charging
3.Reset
4.Gain Control
5.Pairing
6.Audio Monitoring & Output Connection
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Caring For Your SYNCO Product
Package List
Product Instruction
TX Transmitter
Display Screen
RX Receiver
① External Mic Input
② USB-C Port
③ Power(MUTE)
④ Reset(Help with Eject Pin)
⑤ Low Cut
① USB-C Port
② Power (MUTE)
③ Reset(Help with Eject Pin)
④ Gain Control
⑤ Pairing
⑥ Pairing
⑦ Built-in Mic
⑧ Display Screen
⑨ Pocket Clip
⑥ 3.5mm Audio Output
⑦ 3.5mm Monitoring Jack
⑧ Display Screen
⑨ Pocket Clip
TX Transmitter
RX Receiver
Operations
TX
RX
1.Power/ Mute
1.Power/ Mute
3.External Mic Input
4.Mic Windshield & Device Installation
5.Reset
6.Low Cut
7.Pairing
2.Charging
Note:
2.Charging
3.Reset
4.Gain Control
5.Pairing
6.Audio Monitoring & Output Connection
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Caring For Your SYNCO Product
Package List
Product Instruction
TX Transmitter
Display Screen
RX Receiver
① External Mic Input
② USB-C Port
③ Power(MUTE)
④ Reset(Help with Eject Pin)
⑤ Low Cut
① USB-C Port
② Power (MUTE)
③ Reset(Help with Eject Pin)
④ Gain Control
⑤ Pairing
⑥ Pairing
⑦ Built-in Mic
⑧ Display Screen
⑨ Pocket Clip
⑥ 3.5mm Audio Output
⑦ 3.5mm Monitoring Jack
⑧ Display Screen
⑨ Pocket Clip
TX Transmitter
RX Receiver
Operations
TX
RX
1.Power/ Mute
1.Power/ Mute
3.External Mic Input
4.Mic Windshield & Device Installation
5.Reset
6.Low Cut
7.Pairing
2.Charging
Note:
2.Charging
3.Reset
4.Gain Control
5.Pairing
6.Audio Monitoring & Output Connection
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Caring For Your SYNCO Product
Package List
Product Instruction
TX Transmitter
Display Screen
RX Receiver
① External Mic Input
② USB-C Port
③ Power(MUTE)
④ Reset(Help with Eject Pin)
⑤ Low Cut
① USB-C Port
② Power (MUTE)
③ Reset(Help with Eject Pin)
④ Gain Control
⑤ Pairing
⑥ Pairing
⑦ Built-in Mic
⑧ Display Screen
⑨ Pocket Clip
⑥ 3.5mm Audio Output
⑦ 3.5mm Monitoring Jack
⑧ Display Screen
⑨ Pocket Clip
TX Transmitter
RX Receiver
Operations
TX
RX
1.Power/ Mute
1.Power/ Mute
3.External Mic Input
4.Mic Windshield & Device Installation
5.Reset
6.Low Cut
7.Pairing
2.Charging
Note:
2.Charging
3.Reset
4.Gain Control
5.Pairing
6.Audio Monitoring & Output Connection
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Caring For Your SYNCO Product
Package List
Product Instruction
TX Transmitter
Display Screen
RX Receiver
① External Mic Input
② USB-C Port
③ Power(MUTE)
④ Reset(Help with Eject Pin)
⑤ Low Cut
① USB-C Port
② Power (MUTE)
③ Reset(Help with Eject Pin)
④ Gain Control
⑤ Pairing
⑥ Pairing
⑦ Built-in Mic
⑧ Display Screen
⑨ Pocket Clip
⑥ 3.5mm Audio Output
⑦ 3.5mm Monitoring Jack
⑧ Display Screen
⑨ Pocket Clip
TX Transmitter
RX Receiver
Operations
TX
RX
1.Power/ Mute
1.Power/ Mute
3.External Mic Input
4.Mic Windshield & Device Installation
5.Reset
6.Low Cut
7.Pairing
2.Charging
Note:
2.Charging
3.Reset
4.Gain Control
5.Pairing
6.Audio Monitoring & Output Connection
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G2(A1) User Manual
Specications
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Audio Input Level
RF Output Power
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1/8" / 3.5mm TRS Mic Input
1V (0dBV)
＜10mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
TX Transmitter
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind mu,
battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).
Warranty
Wireless Transmission
RF Frequency Band
Approximate RF Sensitivity
Working Distance
Mounting
Number of Audio Channels
Audio Output
Gain
Audio Output Level
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
-81dBm
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1
1/8" / 3.5mm TRS Mic Output
1/8" / 3.5mm TRS Headphone Output
0-5 Level
Line Out: 1V; Monitoring: 25-30mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
Built-in/External Mic
Mono
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
135dB SPL (at 1KHz)
RX Receiver
Microphone
Adjust the recording level of inbuilt mics for Canon Camera (Take EOS
5D Mark Ⅳ for example)
SHOOT4:Movie
AF
123 4
5
MovieServoAF
AFmethod
Griddisplay
Movierecquality
Soundrecording
MovieServoAFspeed
MovieServoAFtracksens
Manual
-
0
Enable
+Tracking
FHD IP B50.00 P MOV
1
Adjust the recording level of inbuilt mics for Panasonic Camera (Take
LUMIX GH5 for example)
3/4
Stabilizer
FlkrDecrease OFF
OFF
0dB
Ex.TeleConv.
Digital
Picture
Time
Miclevel
MiclevelAdj.
DISP
.
X
Adjustthesound
inputlevel
1
MicLevelAdj.
-3dB
Set
L
-12 0
R
-12 -6 +6±0
2
Soundrecording
Soundrec.Manual
Rec.level
-dB40120
MENU
L
R
2
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera (Take A7S Ⅱ
for example)
123456789
SteadyShot
SteadyShotSettings
ColorSpace
AutoSlowShut
AudioRecording
AudioRecLevel
On
sRGB
On
On
MENU
1
AudioRecLevel
SelectAdjustExit
-20 -3 0dB
CH1
CH2
Reset
15
2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G2(A1) User Manual
Specications
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Audio Input Level
RF Output Power
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1/8" / 3.5mm TRS Mic Input
1V (0dBV)
＜10mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
TX Transmitter
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind mu,
battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).
Warranty
Wireless Transmission
RF Frequency Band
Approximate RF Sensitivity
Working Distance
Mounting
Number of Audio Channels
Audio Output
Gain
Audio Output Level
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
-81dBm
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1
1/8" / 3.5mm TRS Mic Output
1/8" / 3.5mm TRS Headphone Output
0-5 Level
Line Out: 1V; Monitoring: 25-30mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
Built-in/External Mic
Mono
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
135dB SPL (at 1KHz)
RX Receiver
Microphone
Adjust the recording level of inbuilt mics for Canon Camera (Take EOS
5D Mark Ⅳ for example)
SHOOT4:Movie
AF
123 4
5
MovieServoAF
AFmethod
Griddisplay
Movierecquality
Soundrecording
MovieServoAFspeed
MovieServoAFtracksens
Manual
-
0
Enable
+Tracking
FHD IP B50.00 P MOV
1
Adjust the recording level of inbuilt mics for Panasonic Camera (Take
LUMIX GH5 for example)
3/4
Stabilizer
FlkrDecrease OFF
OFF
0dB
Ex.TeleConv.
Digital
Picture
Time
Miclevel
MiclevelAdj.
DISP
.
X
Adjustthesound
inputlevel
1
MicLevelAdj.
-3dB
Set
L
-12 0
R
-12 -6 +6±0
2
Soundrecording
Soundrec.Manual
Rec.level
-dB40120
MENU
L
R
2
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera (Take A7S Ⅱ
for example)
123456789
SteadyShot
SteadyShotSettings
ColorSpace
AutoSlowShut
AudioRecording
AudioRecLevel
On
sRGB
On
On
MENU
1
AudioRecLevel
SelectAdjustExit
-20 -3 0dB
CH1
CH2
Reset
15
2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G2(A1) User Manual
Specications
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Audio Input Level
RF Output Power
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1/8" / 3.5mm TRS Mic Input
1V (0dBV)
＜10mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
TX Transmitter
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind mu,
battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).
Warranty
Wireless Transmission
RF Frequency Band
Approximate RF Sensitivity
Working Distance
Mounting
Number of Audio Channels
Audio Output
Gain
Audio Output Level
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
-81dBm
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1
1/8" / 3.5mm TRS Mic Output
1/8" / 3.5mm TRS Headphone Output
0-5 Level
Line Out: 1V; Monitoring: 25-30mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
Built-in/External Mic
Mono
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
135dB SPL (at 1KHz)
RX Receiver
Microphone
Adjust the recording level of inbuilt mics for Canon Camera (Take EOS
5D Mark Ⅳ for example)
SHOOT4:Movie
AF
123 4
5
MovieServoAF
AFmethod
Griddisplay
Movierecquality
Soundrecording
MovieServoAFspeed
MovieServoAFtracksens
Manual
-
0
Enable
+Tracking
FHD IP B50.00 P MOV
1
Adjust the recording level of inbuilt mics for Panasonic Camera (Take
LUMIX GH5 for example)
3/4
Stabilizer
FlkrDecrease OFF
OFF
0dB
Ex.TeleConv.
Digital
Picture
Time
Miclevel
MiclevelAdj.
DISP
.
X
Adjustthesound
inputlevel
1
MicLevelAdj.
-3dB
Set
L
-12 0
R
-12 -6 +6±0
2
Soundrecording
Soundrec.Manual
Rec.level
-dB40120
MENU
L
R
2
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera (Take A7S Ⅱ
for example)
123456789
SteadyShot
SteadyShotSettings
ColorSpace
AutoSlowShut
AudioRecording
AudioRecLevel
On
sRGB
On
On
MENU
1
AudioRecLevel
SelectAdjustExit
-20 -3 0dB
CH1
CH2
Reset
15
2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G2(A1) User Manual
Specications
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Audio Input Level
RF Output Power
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1/8" / 3.5mm TRS Mic Input
1V (0dBV)
＜10mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
TX Transmitter
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind mu,
battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).
Warranty
Wireless Transmission
RF Frequency Band
Approximate RF Sensitivity
Working Distance
Mounting
Number of Audio Channels
Audio Output
Gain
Audio Output Level
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
-81dBm
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1
1/8" / 3.5mm TRS Mic Output
1/8" / 3.5mm TRS Headphone Output
0-5 Level
Line Out: 1V; Monitoring: 25-30mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
Built-in/External Mic
Mono
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
135dB SPL (at 1KHz)
RX Receiver
Microphone
Adjust the recording level of inbuilt mics for Canon Camera (Take EOS
5D Mark Ⅳ for example)
SHOOT4:Movie
AF
123 4
5
MovieServoAF
AFmethod
Griddisplay
Movierecquality
Soundrecording
MovieServoAFspeed
MovieServoAFtracksens
Manual
-
0
Enable
+Tracking
FHD IP B50.00 P MOV
1
Adjust the recording level of inbuilt mics for Panasonic Camera (Take
LUMIX GH5 for example)
3/4
Stabilizer
FlkrDecrease OFF
OFF
0dB
Ex.TeleConv.
Digital
Picture
Time
Miclevel
MiclevelAdj.
DISP
.
X
Adjustthesound
inputlevel
1
MicLevelAdj.
-3dB
Set
L
-12 0
R
-12 -6 +6±0
2
Soundrecording
Soundrec.Manual
Rec.level
-dB40120
MENU
L
R
2
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera (Take A7S Ⅱ
for example)
123456789
SteadyShot
SteadyShotSettings
ColorSpace
AutoSlowShut
AudioRecording
AudioRecLevel
On
sRGB
On
On
MENU
1
AudioRecLevel
SelectAdjustExit
-20 -3 0dB
CH1
CH2
Reset
15
2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G2(A1) User Manual
Specications
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Audio Input Level
RF Output Power
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1/8" / 3.5mm TRS Mic Input
1V (0dBV)
＜10mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
TX Transmitter
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind mu,
battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certicate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).
Warranty
Wireless Transmission
RF Frequency Band
Approximate RF Sensitivity
Working Distance
Mounting
Number of Audio Channels
Audio Output
Gain
Audio Output Level
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
-81dBm
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1
1/8" / 3.5mm TRS Mic Output
1/8" / 3.5mm TRS Headphone Output
0-5 Level
Line Out: 1V; Monitoring: 25-30mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
Built-in/External Mic
Mono
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
135dB SPL (at 1KHz)
RX Receiver
Microphone
Adjust the recording level of inbuilt mics for Canon Camera (Take EOS
5D Mark Ⅳ for example)
SHOOT4:Movie
AF
123 4
5
MovieServoAF
AFmethod
Griddisplay
Movierecquality
Soundrecording
MovieServoAFspeed
MovieServoAFtracksens
Manual
-
0
Enable
+Tracking
FHD IP B50.00 P MOV
1
Adjust the recording level of inbuilt mics for Panasonic Camera (Take
LUMIX GH5 for example)
3/4
Stabilizer
FlkrDecrease OFF
OFF
0dB
Ex.TeleConv.
Digital
Picture
Time
Miclevel
MiclevelAdj.
DISP
.
X
Adjustthesound
inputlevel
1
MicLevelAdj.
-3dB
Set
L
-12 0
R
-12 -6 +6±0
2
Soundrecording
Soundrec.Manual
Rec.level
-dB40120
MENU
L
R
2
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera (Take A7S Ⅱ
for example)
123456789
SteadyShot
SteadyShotSettings
ColorSpace
AutoSlowShut
AudioRecording
AudioRecLevel
On
sRGB
On
On
MENU
1
AudioRecLevel
SelectAdjustExit
-20 -3 0dB
CH1
CH2
Reset
15
2
Table of contents
Other Synco Microphone manuals
