Synco V1M User manual

Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone CMic-V1M User Manual
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Product Introduction
Operations
1. Working Indicator
2. Mute Mode
3. 3.5mm Monitoring Jack
1. The Use of Desktop Microphone Stand
2. The Use of Microphone
4. Type-C Output
Green Light 󽗊icker: Normal Recording
(The green lights will 󽗊icker according to input level signal.)
Press once to initiate mute mode, and the working indicator turns red.
For plug-in earphones to monitor the recording in real time. Please mind
the loudness.
Red Light: Mute Mode On
iPhone
Type-C to USB
Cable & USB to
Lightning
Adapter
(excluded)
Type-C to USB
Cable
Type-C to
Type-C Cable
Laptop/PC Android

WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us
via Email：[e-mail]
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Speci󽗉cations
Diaphragm Size
Transducer
Frequency Response
Impedance
Sensitivity
Sampling Rate
Power Supply
S/N Ratio
Maximum SPL
Dimensions (L x Diam)
Output
Net Weight
Ø14mm
Electret Condenser
20Hz-20KHz
≤2.2KΩ
-45dB+3dB re 1 Volt/Pascal
48KHz/24bit
5V/1A
72 dB
135dB (1KHz THD > 1%)
47mm x 47mm x 156mm
Type-C
295g
2. Performance Parameter
1. Polar Pattern: Cardioid
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
[e-mail]
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation speci󽗉cation
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Modi󽗉cations to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certi󽗉cate, or the
code on the product or warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈,
battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at [e-mail].
Please retain your sales receipt and warranty certi󽗉cate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
Warranty
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).