Synco P2T User manual

Thank you for choosing SYNCO product.Please read this manual carefully before use and follow all instructions mentioned herein.Microphone P2TUser ManualCaring For Your SYNCO ProductPackage ListProduct InstructionPlease keep the product in a dry, clean, dust-free environment.Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.Use only a soft and dry cloth for cleaning the product.Malfunction may be caused by dropping, impact of external force.Do not attempt to disassemble the product. Doing so voids warranty. Please have the product checked or repaired by authorized technicians if any malfunctions happened.Failure to follow all the instructions may result in mechanics damage.Warranty does not apply to human errors.TX Transmitter x2RX Receiver (Type-C Connector) x1Wireless Charging Case x1Charging Cable x1Type-C to 3.5mm Adapter x1TX TransmitterRX ReceiverWireless Charging Case① Power② Working Indicators③ Built-in Mic④ Contacts⑤ Pocket Clip① Vocal E󽗈ects/ Mono/Stereo② Type-C Port③ Working Indicators④ Connector⑤ Contacts① Pairing/ Power Prompt② Type-C Port③ Working Indicators④ ContactsIndicator — Transmitter (Double press the Power button to turn o󽗈 light e󽗈ect)System unpairedCharging, and then turns o󽗈 when fully charge System paired, normal workingLow batteryFlash concurrentlySingle light keeps on (light e󽗈ect o󽗈)Single light keeps on (in the case)Illuminate sequentially(light e󽗈ect on)Single light 󽗊ashesWorking Indicators(White Light)Working Indicators(Red Light)TX TransmitterRX ReceiverWireless Charging CaseIndicator — ReceiverIndicator — Wireless Charging CasePairingSystem unpairedStereo mode (Only original is supported)System pairedMono mode-Original soundMono mode-Vocal e󽗈ects onIlluminate sequentiallyFlash concurrentlySingle light keeps on & Illuminate sequentiallySingle light keeps on & Illuminate sequentially two-wayIlluminate sequentiallySingle light 󽗊ashes twice & Illuminate sequentiallyWorking Indicators(White Light)Working Indicators (White Light)Operations1. Usage2. Pairing3. Charging① Tap on the right side of charging case to pop out the drawer② Take the TX and RX out ③ TX should boot automatically as it leaved the case, and switch itself o󽗈 automatically when returning to the case.(Forcible switch: Long press the Power button on TX for 3 seconds)④ RX should boot automatically as it is plugged into smartphone① Place the TX and RX in the case with their contacts are connected with the case’s② Long press the Pairing button on the case for 3 seconds with the drawer open③ The indicators on the TX and RX should light up and illuminate sequentially when pairing is successfulNote: The transmitter will automatically switch o󽗈 if it is unpaired or disconnected for 5 minutes.Charge the TX: Place the TX in the case with contacts connected with the case’s.Charge the case: Connect the case with power supply via the charging cable.Long press for 3 seconds4. Check the power5. Use vocal e󽗈ectsTX: Short press the Power button, the indicators will light up according to remain power for 5 secondsCharging Case: Short press the Power Prompt button, the indicators will light up according to remain power for 5 secondsShort press the Vocal E󽗈ects button on the receiver to switch sound e󽗈ects: Original >> Studio FX >> KTV FX >> Voice Ampli󽗉cation >> EDM (Electronic Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX.Default e󽗈ect: Original.Note: The vocal e󽗈ect will apply to both transmitters. In Stereo mode, only original is supported. Other vocal e󽗈ects are unavailable.6. Mono/ StereoMono-OriginalMono-Other vocal e󽗈ectsMono-OriginalLong press the Mono/Stereo button on the RX onceLong press the Mono/Stereo button on the RX onceLong press the Mono/Stereo button on the RX onceStereo

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, [e-mail]://www.facebook.com/syncomicrophonesGuangzhou Zhiying Technology Co., LtdWARRANTY CERTIFICATEUSER INFORMATIONSALES INFORMATIONREPAIR RECORDRESULTPlease register your warranty. Meanwhile, you are welcomed to contact us via Email：[e-mail] Name:Phone Number:Email:Address:Sales Date:Model:Product Code:Dealer:Service Date:Technician:Issue:Solved Unsolved Returned(Replaced)
TX TransmitterRX ReceiverSpeci󽗉cationsWireless TransmissionRF Frequency BandFrequency ResponseWorking DistanceSampling RateBit DepthSensitivitySNRRF Output PowerBattery TypeBattery Charging TimeBattery LifeDimensionsMaterialWeightWireless TransmissionRF Frequency BandDigital 2.4GHz2400-2483.5MHz20Hz-20KHz492ft/150m(LOS area); 164ft/50m(NLOS area)48KHz16Bit-26dB>75dB10dBBuilt-in Lithium Battery, 120mAh1.5H5H49x19x19 (mm)ABS10gDigital 2.4GHz2400-2483.5MHzWorking DistanceSampling RateBit DepthAntennaMonitoringConnectorPower InputDimensionsMaterialWeight492ft/150m(LOS area); 164ft/50m(NLOS area)48KHz16BitBuilt-in3.5mm In-Ear MonitoringType-C OutputType-C49x30x9 (mm)ABS5gWireless Charging CaseBattery TypeBattery Charging TimeCharging PortPower RequirementsDimensionsWeightWarranty Exclusions and LimitationsFaults resulted from inappropriate use of a product without following its operation speci󽗉cationArti󽗉cial damage, e.g. crash, squeeze, scratch, or soakingModi󽗉cations to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alterationThe code on product is inconsistent with that of warranty certi󽗉cate, or the code on the product or warranty certi󽗉cate is altered or torn o󽗈All consumable accessory attached to a product, like cable, wind mu󽗈, batteryFaults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.Warranty Claim ProcedureIf failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at [e-mail] retain your sales receipt and warranty certi󽗉cate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.Warranty PeriodThank you for purchasing SYNCO products.1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the 󽗉rst end-user.Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee). WarrantyBuilt-in Lithium Battery, 700mAh2HType-C Port5V 2A70x68x38mm87.5g8. In-Ear monitoringPlug the included Type-C to 3.5mm Adapter into the Type-C Port on the receiver. Then plug in your headphones to real-time monitor mic recording and device’s backgrounding.Note: The included Type-C to 3.5mm Adapter is exclusive, not available for other devices.7. Charging phone devicePlug your phone charging cable into the Type-C Port on the receiver.