Syris SYRDS1 User manual
SYRDS1 Proximity Card Reader
Installation Manual
WiegandTM &RS485DUALINTERFACE
SYRIS Technology Corp.
ADD : 12F, No.16, Sec. 2, Taiwan Blvd., West Dist.,
Taichung City 40354, Taiwan
TEL : +886-4-2207-8888
FAX : +886-4-2207-9999
Website : http://www.syris.com
Ver:03.03
* Power supply should be regulated linear power supply.
* Your system must have a single grounded point.
* The shield must run continuous throughout the installation.
SYRDS1 Proximity Card Reader Specification
Water resistant, high security, high durability, and low identification error rate.
SYRIS proximity reader is able to interface with all existing access control system by Wiegand™ 26 bits formats and RS485
formats dual .
Items / Specs SYRDS1 SYRDS1-M1 SYRDS1-H1
Transmit Frequency 125KHz 13.56 MHz 13.56 MHz
(Mifare、IC、i-Code care)
Card Campatiblity SYRIS card (EM compatible) Mifare series ISO1443A/B /15693 / Mifare
Read range* 5 ~ 15 cm 2 ~ 6 cm 2 ~ 6 cm
Card Read Time 0.1sec(typical)
Output Format RS485 formats and WiegandTM formats
WiegandTM Formats WiegandTM 26 bits、34 bits、42 bits、66 bits formats
Baud rate 19,200 bps (4,800、9,600、19,200、38,400、57,600、115,200)
Operating Temperature -20 ℃to +70 ℃
Storage Temperature -30 ℃ to +80 ℃
Input Voltage 8V to 15V DC / 0.5~2W
Dimensions (WxHxD) 75 x 115 x 16 mm
* This specification is preliminary and is subject to change without prior notice
* Reading range is subject to card type, site interference and antenna specs for more information
This manual suits for next models
2
Table of contents
Other Syris Card Reader manuals
