Syris SYRDT5-B User manual


SYRDT5-B/T5-K 󰦊
󰂃󰙉󰥑󰕓󰌦
󰠏󰃸
403󰆢12󰅧12󰏵
󰇞󰆊 [phone]
󰀻886-4-2207-9999
󰇞󰑄[email protected]
󰋜 http://www.syris.com
Ver:02.31
WiegandTM &RS485DUALINTERFACE

SYRDT5-B/T5-K WIRING DIAGRAM
* 󰇞󰃎󰙉󰙉󰑖󰇞󰃎󰙉 (󰇞󰃎)
* 󰀫󰑖
* 󰅹󰇞󰃎󰀫

SYRDT5-B MOUNTING PLATE
SYRDT5-B/T5-K :
* This specification is preliminary and is subject to change without prior notice
* Reading range is subject to card type, site interference and antenna specs for more information
Items / Specs SYRDT5-B SYRDT5-B-M1
󰘏 125KHz 13.56MHz
(Transponder) TEMIC/EM compatible MIFARE®
󰥑󰟇 2cm ~ 10cm 2cm~8cm
󰥑󰀕 0.2sec(typical)
󰉋󰦊 3 LED
󰗢 Speaker maximum 0.5 W
LCD 󰦊 128 x 64 Dot16 x 4 CharLCD with backlight
󰜗󰏨 (with backlight) 4 key keypad
Input Points 4 voltage free
 RS485 formats and WiegandTM formats
󰋣 WiegandTM 26 bits34 bits42 bits formats
 19,200 bps (4,8009,60019,20038,40057,600115,200230,400)
󰟒 Gray / Blue , Green / Red , Yellow / Dark green
󰃖 -20 to 55 
󰘰󰃖 -30 to 70 
󰗢󰇞󰘹 8V to 20V DC
 0.5 W to 2 W
(mm) 99.6 W x 150.85 H x 30.75 D

SYRDT5-K MOUNTING PLATE
 











SYRDT5-B/T5-K :
Items / Specs SYRDT5-K SYRDT5-K-M1
󰘏 125KHz 13.56MHz
(Transponder) TEMIC/EM compatible MIFARE®
󰥑󰟇 2cm ~ 10cm 2cm~8cm
󰥑󰀕 0.2sec(typical)
󰉋󰦊 3 LED
󰗢 Speaker maximum 0.5 W
LCD 󰦊 128 x 64 Dot16 x 4 CharLCD with backlight
󰜗󰏨 (with backlight) 16 key keypad
Input Points 4 voltage free
 RS485 formats and WiegandTM formats
󰋣 WiegandTM 26 bits34 bits42 bits formats
 19,200 bps (4,8009,60019,20038,40057,600115,200230,400)
󰟒 Gray / Blue , Green / Red , Yellow / Dark green
󰃖 -20 to 55 
󰘰󰃖 -30 to 70 
󰗢󰇞󰘹 8V to 20V DC
 0.5 W to 2 W
(mm) 99.6 W x 150.85 H x 30.75 D
* This specification is preliminary and is subject to change without prior notice
* Reading range is subject to card type, site interference and antenna specs for more information

SYRDT5-K Reader Operating Guide -1
Select Language

[ENGLISH]
[Traditional Chinese] [Simple Chinese].
Select Language
[Traditional Chinese]
Cancel Enter
Select Language
Cancel Enter

Sound VOL : [9]
Alarm VOL : [9]
Cancel Enter



Set Volume
Set Volume
Cancel Enter


12H 24H

2004/05/01
[12H] 10:30:00
Cancel Enter
Setup Menu
2004/05/01
10:30:00
Saturday AM.
Password
[0000]
Cancel Enter
4.
Select Function
Work Leave
Over Setup
D
Set Date Time
Cancel Enter
Click under the
Standby mode to enter
the “Main Menu”
Start / Finish Work
Leave / Back for Duty
Start / Finish overtime
Setup
Click again
to enter login mode
Enter the password
(Default password is 1234)
click to Login
or click to cancel
Set with number key
Click to switch the
field
Use to change form
Click to confirm
Click to switch options
Click to enter
Click to cancel
Click to change language
Click to confirm
Click to switch options
Click to enter
Click to cancel
Use number key
to adjust volume
Click to switch
to next field
Click to confirm
A B
D
CD
A
B
C
D
D
EN
CLR
Set Date Time
EN
EN
CLR EN
Click to switch options
Click to enter
Click to cancel
EN
CLR
EN
CLR
EN
EN
CLR
EN
EN
CLR EN
CLR EN
CLR EN
CLR EN
CLR EN
CLR EN

SYRDT5-K Reader Operating Guide -2
Information of machine version
Set Reader
04201234 V4.02-01
Mode: SYRDT5-K
Serial Number: 04201234
Firmware Version: V4.02-01
ID:[01]
MODE:[RS485]
Cancel Enter



[WIEGAND]RS485WIE&485
RS485 2432 40
WIEGAND  263442
ID:[01]
RS485 BIT:[32]
Cancel Enter
ID:[01]
WIEGAND BIT:[26]
Cancel Enter
Set Reader
Cancel Enter
Set Password
PASSWORD
[1234]
Cancel Enter
Use number key to
change Password
Click to to move
to next digit
Click to finish setting
Set BackLight
BackLight Delay
[000]
Cancel Enter



 
Set BackLight
Cancel Enter
Set Password
Cancel Enter
Click to switch options
Click to enter
Click to cancel
Use number key to
change time setting
Click to move
to next digit
Click to confirm
Click to switch options
Click to enter
Click to cancel
Click to switch options
Click to enter
Click to cancel
Use number key to set the ID
Click to move to next field
Click to change the
communication mode
Click to confirm
Use to change the
WIEGAND bits number
Click to confirm
Use to change the
RS485 bits number
Click to confirm
EN
CLR
EN
EN
EN
EN
CLR
CLR
EN
EN
EN
EN
CLR EN
CLR EN
CLR EN
CLR EN
CLR EN
CLR EN
CLR EN
CLR EN