TAG 688 User manual

1
MODEL # LEGPRS
TAG FITNESS 688 LEG PRESS
ASSEMBLY INSTRUCTIONS

2
EXPLODED DRAWING & PARTS LIST

3
PARTS LIST
NO DESCRIPTION Q’TY NO DESCRIPTION Q’TY
1 LEFT FRAME 1 39 HANDLE SLEEVE 2
2 RIGHT FRAME 1 40 SLEEVE 1
3 BACK FRAME 1 41 BUSHING CAP 1
4 INNER ADJUSTING TUBE 1 42 BARBELL AXIS 1
5 SEAT ADJUSTING FRAME 1 43 BARBELL AXIS 1
6 CONNECTING TUBE 2 44 WEIGHT SUPPORT 4
7 OUTER ADJUSTING TUBE 1 45 LOCK NUT HEX M10 14
8 KNOB 1 46 HEX HEAD BOLT M10x125 2
9 STOPPER PAD 2 47 HEX HEAD BOLT M10x25 6
10 AXIS 2 48 PAN HEAD, ALLEN BOLT M8x15 8
11 AXIS 1 49 PHILIP HEAD, SELF-TAPPING BOLT 2
12 HANDLE CAP 3 50 FLAT WASHER 20
13 HANDLE SLEEVE 1 51 HEX HEAD BOLT M12x25 4
14 METAL BUSHING 10 52 PAN HEAD, ALLEN BOLT M12*25 6
15 FOOTPAD 5 53 PAN HEAD, ALLEN BOLT M12*85 8
16 PLATFORM MAT 1 54 PAN HEAD, ALLEN BOLT M10*15 2
17 SHOCK ABSORBER RUBBER 4 55 PAN HEAD, ALLEN BOLT M8x65 2
18 DECORATIVE CAP 3 56 FLAT WASHER 6
19 FLAT WASHER 46 57 LOCK NUT HEX M8 2
20 PAN HEAD, ALLEN BOLT M10*20 6 58 PAN HEAD, ALLEN BOLT M8x25 1
21 HEX HEAD BOLT M10x75 12 59 ALLEN HEAD, SET SCREW M6x6 2
22 HEX HEAD BOLT M10x70 2 60 TROLLEY 2
23 PAN HEAD, ALLEN BOLT M6*10 4 61 BUSH 4
24 ROUND HEAD, ALLEN BOLT M6*20 3 62 BEARING 12
25 FLAT HEAD, ALLEN BOLT M8*15 10 63 TROLLEY 4
26 GUIDE-ROD 2 64 BUSHING 8
27 SLIDING FRAME 1 65 PAN HEAD, ALLEN BOLT M10*65 4
28 SEAT FRAME 1 66 ENDING CAP 2
29 LEFT LIMITE FRAME 1 67 FLAT HEAD, ALLEN BOLT M8x25 2
30 RIGHT LIMITE FRAME 1 68 PAN HEAD, ALLEN BOLT M8x20 2
31 FIXING TUBE 2 69 PAN HEAD, ALLEN BOLT M6x20 2
32 SEAT PAD 1 70 STOPPER PAD 2
33 BACK PAD 1 71 FLAT WASHER 2
34 PILLOW 1 72 SHOCK ABSORBER RUBBER 8
35 FIXING PLATE 6 73 RING 3
36 FIXING PLATE 1 74 ALLEN HEAD, SET SCREW M6*5 3
37 PROCTECTING JACKET 6 75 BRACKET 2
38 DECORATIVE CAP 2 76 BOLT 2

4
ASSEMBLY
STEP1
Assemble the left frame(1) to the right frame(2) using seat frame(28) and 2 connecting tube(6) using 24 flat
washer(19), 12 hex head bolt 10x75(36) 4 fixing plate(35)and 12 lock nut hex 10(45). Adjust the equipment and
using the right tools tighten bolts and nuts properly.
STEP2
Put the sliding frame (27) in the equipment as shown in the drawing. Insert 2 guide-rods (26) into the upper
limited position of left frame (1) and right frame (2) through the support in the sliding frame (27). Insert 1 stopper
pad(9) each guide-rod(26) and fix the inferior and superior sides of guide-rod using 2 pan head Allen bolt 8x20(68),
2 flat washers(56), 2 flat head Allen bolt 8x25(67) and 2 ending cap(66). Usingtherighttoolstightenbolts and
nutsproperly.
67
66
6766
26
26
27
2
1
68
56
68 56
9
9
2119
35
2119
21
1935
21
19
2119
35
21
19
2
1945
6
45
19
19
45
4519
1945
19
45
6
45
19
4519
19
45
19
45
28
45
45
19
19
35
35
19
21
21 19
21 19
21 19
21 19
21 19
35
1

5
STEP3
Connect the back cushion(33) and cushion(34) to the back frame(3), using 6 flat washer(19), 4 hex head
bolt 10x25(47) and 2 hex head bolt 10x70(22).Slide the inner adjusting tube(4) to the outer adjusting tube(7).
Insert the knob (8) and tighten the boatman head Allen bolt (58). Fix the seat adjusting frame (3) in the seat frame
(28) using 2 head bolt 10x125 (46), 4 flat washer (19), 1 fixing plate (36) and 2 lock nut hex 10
(45).Usingtherighttoolstightenbolts and nutsproperly.
STEP4
Slide the barbell axis(42) to the sliding frame(27) and fix it using 2 flat washers(56), 1 lock nut hex 10(57)
and 1 pan head Allen bolt 10x65(55). Slide the barbell axis(43) to the sliding frame(27)and fix it using 1 flat
washer(56), 1 lock nut hex 10(57) and 1 hex head bolt 10x65(55). Connect the 4 weight support (44) 2 each side,
using 4 flat washers (50) and 4 hex head bolt 12x25 (51). Insert in the weight support (42, 43 & 44) 8shock
absorber rubber (67) 1each weight support.Usingrighttools to tightenbolts and nut.
55
56
57
72
72
42
43
57
56
56
55
72
44
72
44
50
51
50
51
51
5044
72
51
50
44
72
72
72
27
34 33
22
22
19
19
8
5
3
7
4
45
19
46
19
58
19
19
28
46 19 19
45
19
47
47 1947 47
36