Edit a Button Message or Image
1. Enter edit mode by swiping down from the top of the screen with three
fingers OR holding for 8 seconds, then select Page Editor.
2. Select a button to edit.
3. To edit a button label: Select But ton Text on the bottom of the screen > select
Tex t >type message > Done. Tap anywhere on the screen to minimize Button
Text menu when finished. Text can be held and dragged around the screen to
move to desired location on the button.
4. To add an image: Select Add Image > choose the preferred image
type > type search word if needed > Select Image. To remove an image, hold
down on the icon and select Delete Image.
*Note: More than one image can be added, and images can be formatted by moving around screen or
pinching or expanding them to change size.
5. Select Done in lower right corner > Home in lower left corner to save changes.
6. Select Player mode.
Add a Button Action > Navigate
1. Enter edit mode by swiping down from the top of the screen with three
fingers OR holding for 8 seconds, then select Page Editor.
2. Select button to be made into a folder.
3. Select Action at the top.
4. Select Jump to Page.
5. Select Change > select page name to jump to. Tap anywhere on screen to
minimize menu.
6. Select Done in lower right corner > Home in lower left corner to save changes.
7. Select Player mode.
Create a Board from Template
*Note: If you have already created a template, start at Step 4.
1. Enter edit mode by swiping down from the top of the screen with three
fingers OR holding for 8 seconds, then select Page Editor.
2. Select icon on lower right. Select the +to add a page to the library.
3. Select My Templates >Create New Template >name the new template >
choose Set > choose a page > Done > Create.
4. Tap Pages, then +.Tap My Templates > select the new template > Add to
Communication Book.
5. Select Page Name (e.g. Page 2) at the bottom of the screen > type new page
name > Done.
6. Select Pages icon on lower right > select the page with the button to be made
into a folder (e.g. Page 1).
7. Follow steps 2-7 for Add a Button Action > Navigate.
GoTalk NOW Plus Quick Reference Guide
for wegoTM A devices with GoTalk NOW Plus
Note: If these instructions do not match your current vocabulary set, please contact
Technical Support for assistance.
GoTalk NOW Plus is copyright Attainment Company Inc.
Updated October 2021
Copy and Paste Buttons
1. Enter edit mode by swiping down from the top of the screen with three fingers OR
holding for 8 seconds, then select Page Editor.
2. Press and hold on button to be copied.
3. Select Copy.
4. If needed, navigate to the page where button will be placed, using the Pages icon.
5. Press and hold on button location for copied button to be placed.
6. Select Paste > select Home in lower left corner to save changes > select Player
mode.
Change the Pronunciation of a Word
1. Enter edit mode by swiping down from the top of the screen with three fingers OR
holding for 8 seconds, then select Page Editor.
2. Select button to edit pronunciation for.
3. Select Action at the top > select Text-to-Speech.
5. Type in the word by spelling it how it sounds >select Preview to test the
pronunciation.
6. Tap anywhere on screen to minimize menu.
7. Select Done in lower right corner >Home in lower left corner to save changes >
select Player mode.
Hiding Buttons
1. Enter edit mode by swiping down from the top of the screen with three fingers OR
holding for 8 seconds, then select Page Editor.
2. Press and hold on button to be hidden > select Disable.
3. Tap anywhere on screen to minimize menu.
4. Select Done in lower right corner >Home in lower left corner to save changes >
Select Player mode.
Guided Access
All dedicated devices come with Guided Access enabled.
1. Open Guided Access menu by quickly triple-clicking the device Home button. If
your device does not have a Home button, use the Power button.
2. Enter passcode: default password is all 1s (1111 or 111111).
3. To continue Guided Access: press Resume (top right).
4. To turn off Guided Access: press End (top left).
5. Lock Menu (restrict use of specific buttons/categories): open Guided Access
menu > use finger to draw a circle around buttons to restrict > Resume.
