Targus APA21US User manual

410-2169-001A / APA21US
User Guide
PLUG-N-POWER
CHARGING STATION
with USB CHARGING
PORTS
1 YEAR LIMITED WARRANTY: We pride ourselves on
the quality of our products. For complete warranty details
and a list of our worldwide ofces, please visit www.
targus.com. Features and specications are subject to
change without notice. All trademarks and registered
trademarks are the property of their respective owners.
All rights reserved. ©2011 Manufactured or imported by
Targus Group International, Inc. (for U.S. sales: 1211
North Miller Street, Anaheim, CA 92806 USA)

Targus Plug-N-Power Charging Station with USB Charging Ports
2
Targus Plug-N-Power Charging Station with USB Charging Ports
3
Charging Station
Introduction
AC outlets with
540 Joules of surge
protection
USB charging ports
(2.1A) for rapid charging
of tablets
Thanks for buying the Targus Plug-N-Power Charging Station with USB
Charging Ports. It simply turns any wall outlet into a mobile device charging
station. This product is perfect to use in kitchens, bathrooms and garages,
and mounts securely to any 2 socket AC outlet.
Green LED shows your
devices are protected
Normal Installation
Plug the Charging Station to a 2-socket AC wall outlet. Check AC blades
are properly mounted in the socket.
Using the Charging Station
Specication
Electrical Rating: AC120V 15A 60Hz 1800Watts
Max. Peak Spike Current: 36000A
Max. Spike Voltage: 6KV
EMI/RFI Noise Filter: 150KHz to 100MHz
Operating Temperature: 0°C - +35°C
Storage Temperature: -20°C - +65°C
For standard AC
powered devices
For tablets (2.1A)
For mobile devices

Targus Plug-N-Power Charging Station with USB Charging Ports
4
Targus Plug-N-Power Charging Station with USB Charging Ports
5
Screw Mounted Installation
1. Remove the original screw in the center of the face plate, making sure
to leave the face plate in place.
2. Install the Charging Station as indicated above for Normal Installation.
3.Using the long center screw that came with the Plug-N-Power
Charging Station, screw the Charging Station into place with a philips
head screwdriver.
Some wall outlet face plates have a center screw hole which can be utilized
for a more permanent installation. While this is not necessary for normal
use of the Charging Station, it offers a more secure form of mounting.
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. To
register your Targus accessory, go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of residence and product
information.
Warranty
Targus warrants this product to be free from defects in materials and workmanship for two
years. If your Targus accessory is found to be defective within that time, we will promptly
repair or replace it. This warranty does not cover accidental damage, wear and tear, or
consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage
to, a computer or other device(s); nor loss of, or damage to, programs, records, or data;
nor any consequential or incidental damages, even if Targus has been informed of their
possibility. This warranty does not affect your statutory rights.
Technical Support
For technical questions, please visit:
US Internet: www.targus.com/support.asp
Regulatory Compliance
(applicable to products with electronic circuitry/parts only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may notcause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: Compatible with most 5 volt tablets. Some tablets require the use of a USB
charging dongle, available for free from Targus.com when you register your product.

Targus Plug-N-Power Charging Station with USB Charging Ports
6
Features and specications are subject to change without notice. All trademarks and registered trademarks are the
property of their respective owners. All right reserved. ©2011, Targus Group International, Inc. and Targus, Inc, Anaheim,
CA 92806, USA.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected;
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not authorized by the party responsible for compliance could
void the user’s authority to operate this product.