Tascam US-122 User manual

US-122
CD Installation
Below are the detailed and complete CD installation instructions for
the Tascam US-122 for Windows XP. These instructions are to be
followed if the user is unable to install with the instructions provided
with the US-122
BEFORE YOU BEGIN,
MAKE SURE THE US122 IS NOT PLUGGED IN
DO NOT PLUG IN YOUR US122 UNTIL YOU ARE INSTRUCTED TO.
TURN OFF YOUR ANTI VIRUS
(1A)
IF YOU HAVE PRECIOUSLY ATTEMPTED TO INSTALL THE US-122
PERFORM A CLEAN UNINSTALL BEFORE PROCEEDING.
The US122 Clean Uninstall document can be found on your CD with in the
Application notes or Documentation folder, English, CleanWin2k_Eng.
Please note that the instructions in that document direct you to the /WINNT folder
for Windows 2K. This folder is named /WINDOWS in XP.
Load the US122 CD-ROM into the CD drive.
Wait a few seconds and a window will appear.
Select Open folder to view files using Windows explorer.
Double-click on Drivers or Drivers Installers.
Double-click on “US122_Win2K_Install_3_06.exe”. note: the Version number
might change
It will have a computer and boxes for an icon.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The “Welcome” screen will appear.
Follow the Closing of Programs instruction if it is applicable to your situation.
Click on NEXT.
The “Read me Information” screen will appear.
Click on NEXT.

The "Start install" screen will appear.
Click on NEXT.
The "Reboot computer" screen will appear.
This screen will inform you that some components were not installed and it will
ask you to reboot your computer
Select "Yes, reboot my computer now".
Click on NEXT.
AFTER YOUR COMPUTER FULLY REBOOTS, PLUG IN YOUR US-122
DIRECTLY INTO YOUR COMPUTER USING THE CABLE THAT IS
PROVIDED. UNPLUG ANY USB DEVICE OR HUB THAT IS USING THE
SAME BUS EXCEPT FOR YOUR KEYBOARD AND MOUSE.
(2A)
Found New Hardware Screen should pop up.
The "Hardware Wizard" screen will appear.
Under "What do you want the wizard to do?”,
select "Install from a list or a specific location (Advanced)”.
Click on NEXT.
The "Please choose your search and installation options" screen will appear.
Put a Check in the box next to "Include this location in the search".
Verify that "C:\Programs Files\US122_Install" is in the location window.
If not, click on BROWSE to select it.
UNCHECK “Search removable media Floppy, CD-ROM” if checked.
Click NEXT.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The "Completing the Found New Hardware Wizard" screen will appear.
Click on FINISH.
"FOUND NEW HARDWARE" SCREEN SHOULD POP UP, AGAIN.
Found New Hardware Screen should pop up.
The "Hardware Wizard" screen will appear.
Under "What do you want the wizard to do?”
Select "Install from a list or a specific location (Advanced)”.
Click on NEXT.
The "Please choose your search and installation options" screen will appear.
Put a Check in the box next to "Include this location in the search".
Verify that "C:\Programs Files\US122_Install" is in the location window.

UNCHECK “Search removable media Floppy, CD-ROM” if checked.
If not, click on BROWSE to select it.
Click NEXT.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The "Completing the Found New Hardware Wizard" screen will appear.
Click on FINISH.
"Found New Hardware" Screen should pop up, FOR THE THIRD TIME!
Found New Hardware Screen should pop up.
The "Hardware Wizard" screen will appear.
Under "What do you want the wizard to do?”
Select "Install from a list or a specific location (Advanced)”.
Click on NEXT.
The "Please choose your search and installation options" screen will appear.
Put a Check in the box next to "Include this location in the search".
Verify that "C:\Programs Files\US122_Install" is in the location window.
If not, click on BROWSE to select it.
UNCHECK “Search removable media Floppy, CD-ROM” if checked
Click NEXT.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The "Completing the Found New Hardware Wizard" screen will appear.
Click on FINISH.
A balloon Screen should pop up indicating "Your new hardware is installed
and ready to use". The USB light should be lit on the US-122. If your USB light
is not on go back to (1A)
YOU HAVE COMPLETED THE INSTALLATION PROCESS.