Taurus SEBR7132 User manual

SEBR7132.01.01
~ 330 Min.
CM
480 kg
SKU: SEBR7132 / SEBR7139
Taurus Elite Trainer
Assembly and Operating Instructions
L 154 | W 220 | H 214

Elite Trainer
2

3
Content
1 GENERAL INFORMATION 7
1.1 Technical Data 7
1.2 Personal Safety 8
1.3 Set-Up Place 9
2 ASSEMBLY 10
2.1 General Instructions 10
2.2 Scope of Delivery 11
2.3 Assembly 13
2.4 Optional Jammer Arms 39
3 STORAGE AND TRANSPORT 40
3.1 General Instructions 40
4 TROUBLESHOOTING, CARE AND MAINTENANCE 41
4.1 General Instructions 41
4.2 Faults and Fault Diagnosis 41
4.3 Maintenance and Inspection Calendar 42
5 DISPOSAL 42
6 RECOMMENDED ACCESSORIES 43
7 ORDERING SPARE PARTS 44
7.1 Serial Number and Model Name 44
7.2 Parts List: Smith Machine 45
7.3 Exploded Drawing: Smith Machine 47
7.4 Parts List: Jammer Arms 48
7.5 Exploded Drawing: Jammer Arms 49
8 WARRANTY 50
9 CONTACT 52

Elite Trainer
4

5
Disclaimer
©2011 Taurus® is a registered brand of the company Sport-Tiedje GmbH. All rights
reserved. Any use of this trademark without the explicit written permission of Sport-
Tiedje is prohibited.
Product and manual are subject to change. Technical data can be changed without
advance notice.
Dear customer,
Thank you for choosing a high-quality equipment of the brand Taurus®. Taurus® oers sports and
tness equipment for the sophisticated home sport and the equipment of tness studios and
business customers.WithTaurus® tness equipment, the focus is on what sport is all about: maximum
performance! Therefore, the equipment is developed in close consultation with athletes and sports
scientists. Because athletes know best what makes perfect tness equipment.
Further information can be found at www.sport-tiedje.com.
Intended Use
The equipment may only be used for its intended purpose.
This tness equipment is suitable for home use, light commercial use and full commercial use.The
light commercial sector includes, for example, institutional facilities such as hospitals, schools,
hotels and associations. Full commercial use refers to commercial use, e.g. in a tness studio.

Elite Trainer
6
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and rst use. The manual will help you to
quickly set up the system and explains how to safely use it. Make sure that all persons exercising with
the equipment (especially children and persons with physical, sensory, mental or motor disabilities)
are informed about this manual and its contents in advance. In case of doubt, responsible persons
must supervise the use of the equipment.
Due to ongoing changes and software optimisations, the manual may have to be updated. If
you notice any discrepancies during assembly or use, please refer to the manual uploaded to the
webshop. The latest manual is always available there.
This equipment has been manufactured according to the latest safety knowledge. As far as possible,
potential safety hazards which could cause injury have been eliminated. Make sure to carefully follow
the instructions and that all parts are securely in place. If required, read through the
instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here.
The contract partner cannot be held liable for damage to health, accidents or
damage to the equipment when it is not used in accordance with these instructions.
The following safety instructions may appear in this manual:
࣑ATTENTION
This notice indicates potentially hazardous situations which, if not avoided, may result in
property damage.
⚠CAUTION
This notice indicates potentially hazardous situations which, if not avoided, may result in slight
or minor injuries!
⚠WARNING
This notice indicates potentially hazardous situations which, if not avoided, may result in death
or serious injuries!
⚠DANGER
This notice indicates potentially hazardous situations which, if not avoided, will result in death
or serious injuries!
LNOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering
replacement parts.

7
1 GENERAL INFORMATION
1.1 Technical Data
Weight and Dimensions
Article weight (gross, incl. packaging): 510 kg / 1124 lbs
Article weight (net, without packaging): 480 kg / 1058 lbs
Packaging dimensions (L x W x H): approx. 225 cm x 94 cm x 44 cm
Set up dimensions (L x W x H): approx. 154 cm x 220 cm x 214 cm
Quantity of weight stacks: 2
Weight: 100 kg / 220 lbs per weight stack
Maximum load of the barbell bar: 300 kg / 661 lbs
Transmission ratio cable pull: 2 : 1
Optional Jammer Arms
Article weight (gross, incl. packaging): 30 kg / 66 lbs
Article weight (net, without packaging): 27 kg / 59 lbs
Packaging dimensions (L x W x H): approx. 137 cm x 74 cm x 18 cm
Set up dimensions (L x W x H): approx. 127 cm x 65 cm x 18 cm
Maximum load: 100 kg / 220 lbs each

Elite Trainer
8
1.2 Personal Safety
⚠DANGER
+ Before you start using the equipment, you should consult your physician that this type of
exercise is suitable for you from a health perspective. Particularly aected are persons who:
have a hereditary disposition to high blood pressure or heart disease, are over the age of 45,
smoke, have high cholesterol values, are overweight and/or have not exercised regularly in
the past year. If you are under medical treatment that aects your heart rate, medical advice
is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please also note that
heart rate monitoring systems can be inaccurate. If you notice any signs of weakness,
nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising
immediately and seek advice from your doctor if necessary.
⚠WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under strict observation
when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ If your equipment provides a safety key, the clip of the safety key must be attached to your
clothing before starting your training. In the event of a fall, the EMERGENCY STOP of the
equipment can be initiated.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well
clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing.When wearing
sports shoes, make sure they have suitable soles, preferably made of rubber or other non-
slip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise
barefoot.
⚠CAUTION
+ If your equipment needs to be connected to the power supply with a mains cable, make
sure that the cable is not a potential tripping hazard.
+ Make sure that nobody is within the range of motion of the equipment during training so as
not to endanger you or other persons.
࣑ATTENTION
+ Do not insert any objects of any kind into the openings of the device.

9
1.3 Set-Up Place
⚠WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠CAUTION
+ Choose a location in which to place the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The training room should be well ventilated during training and not be exposed to any
draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be at, loadable and solid.
+ If your device is to be mounted on the wall/ceiling, make sure that you use the appropriate
assembly material to avoid possible damages or personal injuries. The contractual partner
accepts no liability for this.
࣑ATTENTION
+ The device may only be used in one building, in suciently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used
outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A oor protective mat/equipment underlay can help to protect high-quality oor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight
unevenness.

Elite Trainer
10
2 ASSEMBLY
2.1 General Instructions
⚠DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around,
as otherwise there is a danger of suocation for children. Keep children away from the
equipment during assembly.
⚠WARNING
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of
injuries.
⚠CAUTION
+ Ensure to have sucient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek
the help of a third technically skilled person.
࣑ATTENTION
+ To prevent damage to the equipment and the oor, assemble the equipment on a mat or
packaging board.
LNOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can
already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.

11
2.2 Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check whether all parts
and tools belonging to the device are included in the scope of delivery and whether damage has
occurred. In the event of complaints, the contractual partner must be contacted directly.
⚠CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.

Elite Trainer
12

13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
LNOTICE
+ First loosely screw all parts together and check that they t properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have diculty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the le.
Step 1: Connecting Main Frame and Bottom Tube
Mount the two parts of the main frame (1) and the barbell cups (3) to the two bottom tubes (2)
on each side using four M12*90 hexagon bolts (50), eight Φ12 washers (54) and four M12 safety
nuts(53).
LNOTICE
The assembly step is the same for both sides.

Elite Trainer
14
Step 2: Connecting both Main Frames
Connect the left and right part of the main frame (1) with the upper and lower cross tube (4 and 5).
Use for each side four M12*90 hexagon bolts (50), eight Φ12 washers (54) and four M12 safety nuts
(53).

15
Step 3: Assembly of the Steel Covers
1. Mount the two covers (6) on each side of the main frame (1) with four M10*20 hexagon bolts
(42), eight Φ10 washers (48), four M10 safety nuts (47) and four M12*70 hexagon bolts (49),
eight Φ12 washers (54), four M12 safety nuts (53).
LNOTICE
The bolts are to be bolt on the inside of the covers.
2. Use for the side where the cross tubes (4 and 5) are located the M12*70 hexagon bolts (49), Φ12
washer (54) and the M12 safety nuts (53). For the other side use the M10*20 hexagon bolts (42),
the Φ10 washer (48) and the M10 safety nuts (47).

Elite Trainer
16

17
Step 4: Assembly of the Chin Up Bar
Mount the chin up bar (7) to the main frame (1) on both sides using each two M12*90 hexagon bolts
(50), four Φ12 washers (54) and two M12 safety nuts (53).

Elite Trainer
18

19
Step 5: Assembly of the Weight Plate Holders
Mount the four weight plate holders (8) to the main frame (1) using one M16*80 hexagon bolt (55)
and one Φ16 washer (56) each.

Elite Trainer
20
Step 6: Assembly of the Weight Stacks
1. Place the rubber cushions (13) onto the main frame (1) and insert the guide bars (9) through the
rubber cushions (13) into the main frame (1).
LNOTICE
Ensure that the internal threads of the guide bars (9) are on the upper side.
2. Place the plates of the weight stack (11) onto the guide bars (9) one by one. Insert the top
weight stack (10) into the weight stack (11).
3. Fix the pulley plate (12) to the slot of the top weight stack (10).
4. Mount each guide bar (9) to the main frame (1) with one Φ10 washer (48) and one M10*70
hexagon bolt (45).
5. Insert the magnetic T pin (14) into the slot of the top weight stack (10).
6. Repeat steps 1 to 5 for the other side.