Taylor 9715L User manual
T
Ta
ay
yl
lo
or
r®
® 9
97
71
15
5L
L T
Th
he
er
rm
mo
om
me
et
te
er
r O
Op
pe
er
ra
at
ti
in
ng
g I
In
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
Thank you for purchasing a Taylor® infrared thermometer. Please read this instruction manual carefully before use.
Keeptheseinstructionshandyforfuturereference.
Thethermometerisanoncontactinfraredthermometer.Simplyaimthethermometeratthetargetandpressthe‘Scan
key’ todisplaythesurfacetemperature.
Temperature Reading Operation
Press the ‘Scan key’ to take a temperature
reading. The unit will display the
temperature of the target for 10 seconds
then turn off automatically.
CAUTION!
1. WHEN DEVICE IS IN USE, DO NOT
LOOK DIRECTLY INTO THE LASER
BEAM–PERMANENT EYE DAMAGE
MAY RESULT.
2. USE EXTREME CAUTION WHEN
OPERATING THE LASER.
3. NEVER POINT THE DEVICE TOWARDS
ANYONE’S EYES.
4. KEEP OUT OF REACH OF ALL CHILDREN.
Continuous Temperature Reading Operation
1.Press andholddown the “Scan”key.
2. Theunitwilldisplaycontinuallyupdatedrealtime temperature readingswhilethe “Scan” keyishelddown.Whenthe
keyisreleased,thelasttemperaturewilldisplayfor10seconds,and thentheunitwillturnoffautomatically.
HACCP CHECK
The “HACCP CHECK” feature is incorporated in our thermometer
temperaturetographicallyindicatecriticaltemperaturezone.Theiconsand
LED indicators located above the display indicate if a food product is ina
safeorunsafeHACCP “DangerZone”temperature.ThegreenandredLED
lightwillalwaysbelitbefore the power isturned off.
A Green LED light with a ” ” icon indicates a safe cool or frozen
condition below 40
o
F (4
o
C), while a ” ” icon indicates a safe holding
temperatureabove 140
o
F (60
o
C).
When the temperature is between 40
o
F (4
o
C) and 140
o
F (60
o
C), the red
LEDwith a” ”iconwillappearandindicatethatthetemperatureisfallenwithintheHACCP“DangerZone”from40
o
to 140
o
F (4~60
o
C).
°C OR °F MODE
Tochangethethermometerfrom‘°C’to‘°F’orfrom‘°F’to‘°C’,firstturntheinstrumentonbypressingthe‘Scankey’,
thenpressthe ‘Modekey’onetime. The‘°C’ or ‘°F’ symbolwillflash. Pressthe ‘Scankey’ tochangetoscale.
EMISSIVITY RANGE
The infrared thermometer is supplied with a default emissivity of 0.95. The emissivity of the thermometer can be
changed from 0.05 (5E) to 1 (100E). Changesshould only be carried out by experienced personnel.To change the
emissivity, firstly turn the instrument on by pressing the ‘Scan’ button, then press the ‘Mode’ button two times for
emissivityfunction.The95EwillflashontheLCDscreen,thenpressthe‘Meas.’buttontoadjusttheemissivityvalue,
pressthe ‘Mode’button again to exit theset upscreen. Forinformation relating tothe emissivity ofspecific materials,
pleasecontactthenearestretailer.Note:noncontactinfraredthermometersarenotrecommendedforuseinmeasuring
the temperatureofshinyorpolishedmetals.
BAR DISPLAY: The fixed setting range for bar display is 68428°F (20~220°C) and Center=248°F (120°C).
Thebardisplaywillbeupdatedcomplywiththemeasurementreadingchanged.
LCD ERROR MESSAGES
Thethermometerincorporatesvisualdiagnosticmessagesasfollows:
「 」
「 」
‘Hi’ or ’Lo’ is displayed when the temperature being measured is outside of the range of the
instrument, ‘Hi’ whenhigherthan+662°F (+350°C)and ‘Lo’ whenlowerthan 67°F (–55°C).
「 」
「 」
‘Er2’isdisplayedwhenthethermometerisexposedtorapidchangesintheambienttemperature.
‘Er3’ is displayed whentheambient temperature ofthe thermometer EXCEEDS 32°F (0°C) OR
+122°F (+50°C). In both cases you should allow plenty of time (minimum 30 minutes) for the
thermometerto stabilize totheworking/roomtemperature.
「 」
Forallothererrormessagesit is necessarytoresetthethermometer.Toresetthethermometer,
turnthe instrument off, remove the battery and wait for aminimum ofone minute, reinsert the
battery and turn on. Ifthe error messageremains, please contact CustomerService for further
assistance.
BATTERIES
Thethermometerincorporatesvisuallowbatteryindicationasfollows:
‘BatteryOK’:
measurements
arepossible
‘BatteryLow’:batteryneedsto
bereplaced,measurements
arepossible
‘BatteryExhausted’:
measurementsare
notpossible
T
Ta
ay
yl
lo
or
r®
® 9
97
71
15
5L
L T
Th
he
er
rm
mo
om
me
et
te
er
r O
Op
pe
er
ra
at
ti
in
ng
g I
In
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
Thank you for purchasing a Taylor® infrared thermometer. Please read thisinstruction manual carefully before use.
Keeptheseinstructionshandyforfuturereference.
Thethermometerisanoncontactinfraredthermometer.Simplyaimthethermometeratthetargetandpressthe‘Scan
key’ todisplaythesurfacetemperature.
Temperature Reading Operation
Press the ‘Scan key’ to take a temperature
reading. The unit will display the
temperature of the target for 10 seconds
then turn off automatically.
CAUTION!
1. WHEN DEVICE IS IN USE, DO NOT
LOOK DIRECTLY INTO THE LASER
BEAM–PERMANENT EYE DAMAGE
MAY RESULT.
2. USE EXTREME CAUTION WHEN
OPERATING THE LASER.
3. NEVER POINT THE DEVICE TOWARDS
ANYONE’S EYES.
4. KEEP OUT OF REACH OF ALL CHILDREN.
Continuous Temperature Reading Operation
1.Press andholddown the “Scan”key.
2. Theunitwilldisplaycontinuallyupdatedrealtime temperature readingswhilethe “Scan” keyishelddown.Whenthe
keyisreleased,thelasttemperaturewilldisplayfor10seconds,and thentheunitwillturnoffautomatically.
HACCP CHECK
The “HACCP CHECK” feature is incorporated in our thermometer
temperaturetographicallyindicatecriticaltemperaturezone.Theiconsand
LED indicators located above the display indicate if a food product is ina
safeorunsafeHACCP “DangerZone”temperature.ThegreenandredLED
lightwillalwaysbelitbefore the power isturned off.
A Green LED light with a ” ” icon indicates a safe cool or frozen
condition below 40
o
F (4
o
C), while a ” ” icon indicates a safe holding
temperatureabove 140
o
F (60
o
C).
When the temperature is between 40
o
F (4
o
C) and 140
o
F (60
o
C), the red
LEDwith a” ”iconwillappearandindicatethatthetemperatureisfallenwithintheHACCP“DangerZone”from40
o
to 140
o
F (4~60
o
C).
°C OR °F MODE
Tochangethethermometerfrom‘°C’to‘°F’orfrom‘°F’to‘°C’,firstturntheinstrumentonbypressingthe‘Scankey’,
thenpressthe ‘Modekey’onetime. The‘°C’ or ‘°F’ symbolwillflash. Pressthe ‘Scankey’ tochangetoscale.
EMISSIVITY RANGE
The infrared thermometer is supplied with a default emissivity of 0.95. The emissivity of the thermometer can be
changed from 0.05 (5E) to 1 (100E). Changesshould only be carried out by experienced personnel.To change the
emissivity, firstly turn the instrument on by pressing the ‘Scan’ button, then press the ‘Mode’ button two times for
emissivityfunction.The95EwillflashontheLCDscreen,thenpressthe‘Meas.’buttontoadjusttheemissivityvalue,
pressthe ‘Mode’button again to exit theset upscreen. Forinformation relating tothe emissivity ofspecific materials,
pleasecontactthenearestretailer.Note:noncontactinfraredthermometersarenotrecommendedforuseinmeasuring
the temperatureofshinyorpolishedmetals.
BAR DISPLAY: The fixed setting range for bar display is 68428°F (20~220°C) and Center=248°F (120°C).
Thebardisplaywillbeupdatedcomplywiththemeasurementreadingchanged.
LCD ERROR MESSAGES
Thethermometerincorporatesvisualdiagnosticmessagesasfollows:
「 」
「 」
‘Hi’ or ’Lo’ is displayed when the temperature being measured is outside of the range of the
instrument, ‘Hi’ whenhigherthan+662°F (+350°C)and ‘Lo’ whenlowerthan 67°F (–55°C).
「 」
「 」
‘Er2’isdisplayedwhenthethermometerisexposedtorapidchangesintheambienttemperature.
‘Er3’ is displayed whentheambient temperature ofthe thermometer EXCEEDS 32°F (0°C) OR
+122°F (+50°C). In both cases you should allow plenty of time (minimum 30 minutes) for the
thermometerto stabilize totheworking/roomtemperature.
「 」
Forallothererrormessagesit is necessarytoresetthethermometer.Toresetthethermometer,
turnthe instrument off, remove the battery and wait for aminimum ofone minute, reinsert the
battery and turn on. Ifthe error messageremains, please contact CustomerService for further
assistance.
BATTERIES
Thethermometerincorporatesvisuallowbatteryindicationasfollows:
‘BatteryOK’:
measurements
arepossible
‘BatteryLow’:batteryneedsto
bereplaced,measurements
arepossible
‘BatteryExhausted’:
measurementsare
notpossible
Whenthe ‘LowBattery’ iconindicatesthebatteryislow,thebatteryshouldbereplacedimmediately
with 2 AAA,1.5Vbatteries.Pleasenote:Itisimportanttoturntheinstrumentoffbeforereplacingthe
batteries, otherwisethethermometermaymalfunction.
Whenreplacingthebatteries,donotmixoldandnewbatteries.Donotmixalkalinestandard
(carbonzinc)orrechargeable(nickelcadmium)batteries. Disposeofbatteriesproperly.Donotdisposeof
unitorbatteriesinfire,asbatteriesinsidethisunitmayexplodeorleak.Keepawayfromchildren.
STORAGE & CLEANING
Thesensorlensisthemostdelicatepartofthethermometer.Thelensshouldbekeptcleanatalltimes.Takecare when
cleaning the lens, using only asoft cloth or cotton swab with wateror medical alcohol, and allowthe lens to fully dry
beforeusingit.Donotsubmergeanypartofthethermometer.Thethermometershouldbestoredatroomtemperature
between 4to+149°F (20 to+65°C).
SPECIFICATIONS
MeasurementRange 67~662°F (55to+350°C)
OperatingRange 32~122°F(0~50°C)
Accuracy(Tobj=1535°C,Tamb=25°C) +/1.8°F (1.0°C)
Accuracy(Tobj=33~350o
C,Tamb=23±3o
C) ±2%ofreadingor4°F (2°C) whicheverisgreater
Resolution67.0~390.0°F) (55.0~199.9°C) 0.1°F / 0.1°C (switchable)
ResponseTime(90%) 1second
Distance:Spot 6:1opticsratio
EmissivityRange 0.95default –adjustable0.05to1.00emissivity
BatteryLife Typically40hr,minimum30hr (autopoweroffafter15seconds)
Battery 2 AAA
Dimensions 24.5 x43.5 x 113.5mm(1.0×1.7×4.5inch)
Weight 3.2oz(90grams) including batteries
EMC/RFI
Readingsmaybeaffectediftheunitisoperatedwithina radio frequencyelectromagneticfieldstrengthofapproximately
3voltsper meter,buttheperformanceoftheinstrumentwillnotbepermanentlyaffected.
OneYearLimitedWarranty
Taylorwarrantsthisproducttobefreefromdefectsinmaterialsorworkmanshipforone(1)year
fromdateof original purchase.Itdoesnotcoverdamagesorwearresultingfromaccident,misuse,
abuse,commercialuse,orunauthorizedadjustmentand/orrepair.
Ifserviceisrequired,donotreturntodistributor.Forservice,callbetween7:30AMand4:30PM,
MountainStandardTime, Mondaythrough Friday. To assist usin service you, please have the
modelnumberanddateofpurchase available.Shouldthisproductrequireservice(orreplacement
atouroption),pleasepacktheitemcarefullyandreturnitprepaid,alongwithreceiptshowingdate
ofpurchaseandanote explainingreasonforreturnto:
Taylor Precision Products
2220 Entrada del Sol, Suite A
Las Cruces, New Mexico 88001
Customer Service Phone: 18002254834
Customer Service Fax: 15755264347
www.taylorusa.com
Therearenoexpressedwarrantiesexceptaslistedabove.Thiswarrantygivesyouspecificlegal
rights,andyoumayhaveotherrightswhichvaryfromstatetostate.
.
© 2006 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and
Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products and its
affiliatedcompanies.Allrightsreserved.
MadetoourexactspecificationsinChina.
Whenthe ‘LowBattery’ iconindicatesthebatteryislow,thebatteryshouldbereplacedimmediately
with 2 AAA,1.5Vbatteries.Pleasenote:Itisimportanttoturntheinstrumentoffbeforereplacingthe
batteries, otherwisethethermometermaymalfunction.
Whenreplacingthebatteries,donotmixoldandnewbatteries.Donotmixalkalinestandard
(carbonzinc)orrechargeable(nickelcadmium)batteries. Disposeofbatteriesproperly.Donotdisposeof
unitorbatteriesinfire,asbatteriesinsidethisunitmayexplodeorleak.Keepawayfromchildren.
STORAGE & CLEANING
Thesensorlensisthemostdelicatepartofthethermometer.Thelensshouldbekeptcleanatalltimes.Takecare when
cleaning the lens, using only asoft cloth or cotton swab with wateror medical alcohol, and allowthe lens to fully dry
beforeusingit.Donotsubmergeanypartofthethermometer.Thethermometershouldbestoredatroomtemperature
between 4to+149°F (20 to+65°C).
SPECIFICATIONS
MeasurementRange 67~662°F (55to+350°C)
OperatingRange 32~122°F(0~50°C)
Accuracy(Tobj=1535°C,Tamb=25°C) +/1.8°F (1.0°C)
Accuracy(Tobj=33~350o
C,Tamb=23±3o
C) ±2%ofreadingor4°F (2°C) whicheverisgreater
Resolution67.0~390.0°F) (55.0~199.9°C) 0.1°F / 0.1°C (switchable)
ResponseTime(90%) 1second
Distance:Spot 6:1opticsratio
EmissivityRange 0.95default –adjustable0.05to1.00emissivity
BatteryLife Typically40hr,minimum30hr (autopoweroffafter15seconds)
Battery 2 AAA
Dimensions 24.5 x43.5 x 113.5mm(1.0×1.7×4.5inch)
Weight 3.2oz(90grams) including batteries
EMC/RFI
Readingsmaybeaffectediftheunitisoperatedwithina radio frequencyelectromagneticfieldstrengthofapproximately
3voltsper meter,buttheperformanceoftheinstrumentwillnotbepermanentlyaffected.
OneYearLimitedWarranty
Taylorwarrantsthisproducttobefreefromdefectsinmaterialsorworkmanshipforone(1)year
fromdateof original purchase.Itdoesnotcoverdamagesorwearresultingfromaccident,misuse,
abuse,commercialuse,orunauthorizedadjustmentand/orrepair.
Ifserviceisrequired,donotreturntodistributor.Forservice,callbetween7:30AMand4:30PM,
MountainStandardTime, Mondaythrough Friday. To assist usin service you, please have the
modelnumberanddateofpurchase available.Shouldthisproductrequireservice(orreplacement
atouroption),pleasepacktheitemcarefullyandreturnitprepaid,alongwithreceiptshowingdate
ofpurchaseandanote explainingreasonforreturnto:
Taylor Precision Products
2220 Entrada del Sol, Suite A
Las Cruces, New Mexico 88001
Customer Service Phone: 18002254834
Customer Service Fax: 15755264347
www.taylorusa.com
Therearenoexpressedwarrantiesexceptaslistedabove.Thiswarrantygivesyouspecificlegal
rights,andyoumayhaveotherrightswhichvaryfromstatetostate.
.
© 2006 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and
Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products and its
affiliatedcompanies.Allrightsreserved.
MadetoourexactspecificationsinChina.
Other manuals for 9715L
1
Table of contents
Other Taylor Thermometer manuals
Taylor
Taylor 519 User manual
Taylor
Taylor 5925N User manual
Taylor
Taylor 6700 User manual
Taylor
Taylor 1700 User manual
Taylor
Taylor 147921 User manual
Taylor
Taylor WeatherGuide System User manual
Taylor
Taylor OMG 808 User manual
Taylor
Taylor 9842 User manual
Taylor
Taylor 9306 User manual
Taylor
Taylor WeatherGuide 1521 User manual
Taylor
Taylor 3504 Owner's manual
Taylor
Taylor 505 User manual
Taylor
Taylor 1488 User manual
Taylor
Taylor Weekend Warrior 805 Owner's manual
Taylor
Taylor 1497 User manual
Taylor
Taylor 9526 User manual
Taylor
Taylor 5341N User manual
Taylor
Taylor 9842FDA User manual
Taylor
Taylor TruTemp Manual
Taylor
Taylor 512 User manual
