Technaxx TX-123 User manual

Technaxx
®
* User Manual
6-in-1 Safety Car Charger TX-123
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the
device the first time, please read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: sup[email protected]
This device has a rechargeable battery. It must be fully charged before first
use. NOTE: Charge the battery of the device every 2–3 month if it is not used!
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product. Share your experience and opinion on one of the
well-known internet portals.
Features
6-in-1 built-in safety tools High quality car charger with 5V/2A
USB output for charging external devies Torch light – 130 lumen
white LED with 2 modes (weak & strong) White flashlight – to
signal in emergencies Seat belt cutting knife – to rescue the driver
in a dangerous situation Emergency hammer – to break a side
window Power bank with 2200mAh battery (rechargeable via
cigarette lighter socket DC 12–24V or Micro USB DC 5V) Small &
handy design
Hints for Environment Protection: Packages materials are
raw materials and can be recycled. Do not disposal old devices
or batteries into the domestic waste. Cleaning: Protect the
device from contamination and pollution (use a clean drapery).
Avoid using rough, coarse-grained materials or solvents/
aggressive cleaner. Wipe the cleaned device accurately.
Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr.
105, 60388 Frankfurt a.M., Germany

Technical specification
Power supply (cigarette lighter socket) DC 12–24V
Input Micro USB DC 5V / 800mA
USB output: Car charger # Power bank DC 5V/2A # DC 5V/1.5A
Power Built-in rechargeable 2200mAh Li-ion battery
3.7V / 8.14Wh / charging time ~3–4 hours
LED Brightness 1W / 130 lumen
Protection Overcharge, over discharge, overload, short
circuit protection function
Material ABS + Aluminium
Weight / Dimensions 84g / (L) 11.4 x (W) 4.0 x (H) 2.6cm
Package contents 6-in-1 Safety Car Charger TX-123, Micro USB
charging cable, User Manual
Product overview (Note: device is not waterproof)
1
LED torch & working
indicator (blue)
2
Micro USB
(charging input)
3
Charging indicator
(Power Bank & torch)
4
USB (charging output)
5
Capacity check /
LED lamp switch
6
Safety bell cutter
7
Negative pole
8
Safety hammer /
Positive pole

Charging
First time before using, charge the TX-123 for 3–4 hours. You can
charge the built-in 2200mAh battery in two ways A and B.
A) Cigarette lighter socket
B) Micro USB
Battery capacity check short press the LED lamp switch (5).
Plug it into cigarette lighter socket.
The BLUE charging indicator will be
flashing, while the BLUE working
indicator will be lit up. lf the battery is
full, all four blue indicators will be lit.
Plug the included Micro USB cable
to the Micro USB input (2) of the
device. Connect the USB side to a
powered USB port for example a 5V
USB power adapter* (*not included)
or a PC USB port. The BLUE
charging indicator will be flashing,
while the BLUE working indicator
will be lit up. lf the battery is full, all
four BLUE indicators will be lit.
No. indicators Capacity level
4x blue 100%
3x blue 75%
2x blue 50 %
1x blue 25%

Functions
1. Charging external digital devices
Use the charging cable of your device to connect it with USB port (4)
of the TX-123. The power indicator on your device will show when it
is connected. Works while connected to the cigarette lighter socket
or in Power Bank mode.
Note1: If your device is an iPhone, use your original cable.
Note2: The product will automatically start charging your device
when connected.
2.+3. Torch with three lighting modes
Press the LED lamp switch (5) about 1.5 seconds to turn on the
LED weak light
 Press again to change to LED strong light.
 Press again to turn on the white flashlight
 Press the LED lamp switch (5) for about 1.5 seconds to
turn off the torch.
4. Seat Belt Cutter (6)
Note: choose your favorite torch
light option by pressing the LED
lamp switch (5)
[weak, strong,
fashlight]
Cut the seat belt to escape in case of
an accident. Hold the TX-123 in your
hand and place the seat belt cutter
(6) on the seat belt. Move it back and
forth to cut the seat belt.

5. Emergency Hammer
When you are locked in the car or encountered accident, use the
emergency hammer (8) to break the car window for escaping. The
emergency hammer is hidden in the positive pole. Hold the TX-123
directly to the car window. Then use the instantly power of your wrist,
and smash the TX-123 against the car window to break it.
Note: Only use this function in emergency situation. [No matter in
which situation, Technaxx will not pay for broken windows!]
NOTE: to use the device as seat belt cutter and emergency
hammer in case of an accident or emergency, place it in the car
where it is accessible to find and to reach.
6. Power Bank (4)
Use the charging cable of your device to connect it with USB port (4)
of the TX-123 for charging. The product will automatically start
charging your device when connected. When the device is fully
charged the TX-123 will automatically stop charging.
Note: When the device is fully charged it can be that after 1–2
minutes the charging process starts again. This is caused by the
function to recognize connected USB devices that need to be
charged.
Capacity
Charging time
Power Bank
iPhone X /
iPhone 8
Huawei Mate 20 /
Huawei P20
Galaxy
S8, S9
2200mAh ~3–4 hours ~90–100% ~60–80% ~70%

Troubleshooting
lf the device does NOT work as car charger or Power Bank
Check whether the adapter is suitable for your mobile
phone/electronic equipment.
Check whether the product shuts down automatically. If yes, just
activate the product by charging the built-in battery.
lf the charger has not been used longer then 3 month, the power
of the built-in battery will be exhausted. lf the charging indicator is
weak, the charger could not charge your mobile phone. Solve this
problem by charging the built-in battery (3–4 hours with the included
USB cable). Then it will get back to work. In order to prolong the
battery life time, charge it once every 2–3 months.
Warnings
To prolong the lifetime of this device, pull it out when starting the
engine of the car. Do not remove any cover to avoid the risk of an
electric shock or other damages. Do not attempt to disassemble
the device, it may result in short-circuit or even damage.
Do not scrape the surface of the device with sharp object and
keep it clean.
This device is NOT waterproof, do not use it in outdoor rainy days.
lf the device falls into the water, it may result in short-circuit. Use a
clean cloth to absorb the water on the device's surface or carefully
use a hairdryer to dry it.
Do not put the device on the dashboard of a vehicle, it may result
in a damage of the device and the battery inside by falling off or too
high temperature. Do not install the device near any heat source
(e.g. radiators or others). Keep the device away from direct sunlight.
This product has powerful intelligent protection function, such as
overcharge, over discharge, overload, short circuit protection
function etc. effectively extending the built-in battery life and mobile
phone battery life.
Keep the device away from children.