Tecnosystemi PICO WI HP2 Series User manual

USER MANUAL
"PICO WI HP2" - WALL-MOUNTED, STATIC INTAKE /
EXTRACTOR FAN WITH HEAT RECOVERY, EQUIPPED WITH EXTERNAL
POWER SUPPLY OR WITH BUILT-IN POWER SUPPLY
ACD100001 - ACD100002 - ACD100003 - ACD100004 - ACD100005 - ACD100006
ACD100007 - ACD100008 - ACD100009 - ACD100010 - ACD100011 - ACD100012
ACD100013 - ACD100014 - ACD100015 - ACD100016 - ACD100017 - ACD100018
"PICO WI RECO 100" - WALL-MOUNTED CROSS FLOW STATIC INTAKE
EXTRACTOR FAN WITH HEAT RECOVERY EQUIPPED WITH EXTERNAL
POWER SUPPLY OR WITH BUILT-IN POWER SUPPLY
ACD100019 - ACD100020 - ACD100021 - ACD100022 - ACD100023 - ACD100024
WI-FI COMFORT CO2
Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
-
C
- -
CCO2
-
C
- -
CCO2
01

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
INTRODUCTION
This manual includes the technical description, operation, installation and assembly instructions,
technical data for the intake extractor unit with energy regeneration “PICO HP2”, “PICO RECO
100”, hereinafter referred to as recovery unit.
SAFETY REQUIREMENTS
Read the user manual carefully before use and installation of heat reversible recovery unit with
individual chamber with energy regeneration.
The installation and the operation of the recovery unit must be carried out in compliance with the
user manual, as well as with applicable legislations, local and national laws and technical and
electrical regulations. The warnings, contained in the user manual, should be heeded, as they
contain vital information for personal safety.
Failure to follow the safety rules can result in damage to the recovery unit. Read this
manual carefully and keep it for as long as the recovery unit is used.
Legend of symbols used in the manual:
THE RECOVERY UNIT WAS NOT DESIGNED FOR USE BY CHILDREN, PERSONS WITH
PHYSICAL OR MENTAL DISABILITIES, PERSONS WITH SENSORY DISABILITIES, OR
PERSONS WITHOUT ADEQUATE QUALIFICATIONS.
THE INSTALLATION AND CONNECTION OPERATIONS CAN BE PERFORMED ONLY BY
QUALIFIED PERSONNEL AFTER FOLLOWING THE ADEQUATE SAFETY TRAINING.
UNATTENDED CHILDREN SHOULD NOT BE ALLOWED ACCESS TO THE SITES WHERE THE
FAN IS INSTALLED.
USE OF THE RECOVERY UNIT
The recovery unit was designed to ensure the air exchange in apartments, holiday farms, hotels,
bars and, in general, domestic and public places.
The recovery unit is tted with a ceramic exchanger which allows the air recirculation thanks to
the energy regeneration with the heat from the intake air.
The recovery unit was designed to be installed in premises on walls with a thickness between 310 mm
and 500 mm (optional tube L=1,500 mm), for the “Pico Reco 100”, the minimum thickness is 370 mm.
The recovery unit was tested for continuous operation connected always to be mains supply.
The transported air must not contain ammable or explosive mixtures, chemical substance
vapours, large dust particles, soot and oil particles, dangerous substances, brous
materials, pathogenic agents or other harmful substances.
MAIN TECHNICAL PARAMETERS
The recovery unit was designed for application within premises with a room temperature varying
from -20°C to +50°C and relative humidity of up to 80%.
WARNING
PROHIBITION
02

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
ASSEMBLY WARNINGS
The recovery unit must be
disconnected from the mains
supply before carrying out any
installation or repair operation.
The recovery unit must not be used
outside the temperature range,
indicated in the user manual,
or in aggressive or explosive
atmospheres.
Do not place any radiators or other
devices near the power cord of the
recovery unit.
Do not use damaged equipment
or wires to connect the recovery
unit to the mains.
Carefully remove the recovery
unit from the packaging.
Use the recovery unit only
in accordance with the
manufacturer's specications.
When installing the recovery
unit, follow the specic safety
regulations for electrical
equipment.
Do not change the length of the
power cord at your own discretion.
Do not bend the power cord. Do
not damage the power cord.
Do not touch the controls and the
remote controls with wet hands. Do
not perform maintenance operations
on the recovery unit with wet hands.
Do not wash the recovery unit
with water. Protect the parts of
the recovery unit from water
seepage.
Disconnect the recovery
unit from the mains before
maintenance.
Do not damage the power cord
when using the recovery unit.
Do not place objects on the
power cord.
Do not open the recovery unit
during operation.
Make sure that the air emitted
by the recovery unit is not
directed at naked ames or
candles.
Do not block the air duct, when the
recovery unit is on.
Do not let children use the
recovery unit.
Keep explosive and ammable
products away from the recovery
unit.
In the event of unusual noises or
smoke, disconnect the recovery
unit from the wall outlet and contact
customer service.
SAFETY OPERATING WARNINGS
03

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
Ø
DE
F
MODEL PICO HP2 30 WI PICO HP2 55 WI PICO HP2 80 WI
SPEED 123123123
SUPPLY VOLTAGE 230 Vac
POWER (W) 1,3 1,4 1,4 1,3 1,6 2,2 1,7 2,6 3,6
MAXIMUM CURRENT CONSUMED
(mA) 38 42 47 65,5 73 81 162 180 200
MAXIMUM AIR FLOW RATE (m³/h) 23 25 28 23 35 46 39 64 74
RPM (min-1) 1863 2070 2300 2106 2340 2600 2350 2610 2900
SOUND PRESSURE AT 1m (dB(A) 27 28 29 24 28 34 28 35 39
SOUND PRESSURE AT 3 m (dB(A) 25 26 27 23 26 32 26 33 37
MAXIMUM AIR TEMPERATURE (°C) FROM -10 TO +50 FROM -10 TO +50 FROM -10 TO +50
REGENERATOR EFFICIENCY ≤90% ≤90% ≤90%
HEAT EXCHANGE FILL MEDIA CERAMIC CERAMIC CERAMIC
TUBE DIMENSIONS (mm) Ø 103 Ø 128 Ø 153
PROTECTION IP 24 IP 24 IP 24
DIMENSIONS AND MODELS A B C Ø D E F
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
ACD100001 / ACD100004 154 500 86 103 35 240 240
ACD100002 / ACD100005 186 500 101 128 35 240 240
ACD100003 / ACD100006 186 500 101 153 35 240 240
DIMENSIONS AND MODELS A B C Ø D E F
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
ACD100007 / ACD100010 154 500 86 103 35 240 240
ACD100008 / ACD100011 186 500 101 128 35 240 240
ACD100009 / ACD100012 186 500 101 153 35 240 240
DIMENSIONS AND MODELS A B C Ø D E F
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
ACD100013 / ACD100016 154 500 86 103 35 240 240
ACD100014 / ACD100017 186 500 101 128 35 240 240
ACD100015 / ACD100018 186 500 101 153 35 240 240
- C
- -
CCO2
DIMENSIONS “PICO HP2”
04

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
DIMENSIONS “PICO RECO 100”
C E F
Ø
A
B
DIMENSIONS AND MODELS A B C Ø E F
(mm) (mm) (mm) (mm) (mm) (mm)
ACD100019 240 240 51 204 500 35
ACD100020 240 240 51 204 500 35
SPEED MIN. 1 MED. 2 MAX. 3
SUPPLY VOLTAGE 230 Vac
POWER (W) 6,6 7,7 8,4
MAXIMUM CURRENT CONSUMED (mA) 550 640 700
MAXIMUM AIR FLOW RATE (m³/h) 70 81 91
RPM (min-1) 3395 4070 4500
SOUND PRESSURE AT 1m (dB(A) 46 48 50
SOUND PRESSURE AT 3 m (dB(A) 43 46 47
MAXIMUM AIR TEMPERATURE (°C) DA -10 °C A +50°C
REGENERATOR EFFICIENCY ≤95%
HEAT EXCHANGE FILL MEDIA POLYESTER
TUBE DIMENSIONS (mm) Ø 204
PROTECTION IP 24
DIMENSIONS AND MODELS AB C Ø E F
(mm) (mm) (mm) (mm) (mm) (mm)
ACD100021 240 240 51 204 500 35
ACD100022 240 240 51 204 500 35
- C
DIMENSIONS AND MODELS A B C Ø E F
(mm) (mm) (mm) (mm) (mm) (mm)
ACD100023 240 240 51 204 500 35
ACD100024 240 240 51 204 500 35
- -
CCO2
05

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
The recovery unit consists of a xed length circular air duct, ventilation unit and external grille.
The two motors, two lters and the exchanger are inside the duct.
The lters are protected in order to purify the supply air and to prevent foreign objects
entering the exchanger and the fans.
The recovery unit generates a visual alarm (red LED indicator) as a reminder to clean or replace
the lter every 1,500 operating hours.
The ceramic exchanger (for the “PICO HP2” models) uses the thermal energy of the intake air in
order to heat the intake air ow.
For the “PICO RECO 100” model, the ll media is made of polyester.
The exchanger is tted with a draw cord on the inside to make it easier to extract (for the “PICO
HP2” models) and special clip for the “PICO RECO 100” model.
The ventilation unit must be installed on the inside part of the wall.
The external grille must be installed on the external part of the wall in order to prevent
water and other objects from entering the recovery unit.
OPERATION OF RECOVERY UNITS
MODEL “PICO HP2” AND MODEL “PICO RECO 100”
CONSTRUCTION DETAIL OF MODEL
“PICO HP2”
FILTER 1
EXTRASLIM
GRILLE
FILTER 2 EXTERNAL GRILLE
HEAT EXCHANGER
SPECIAL CERAMIC
FILL MEDIA
3-SPEED MOTOR
LED INDICATOR
FUNCTION
SETTING
ATTRACTIVE
FRONT PANEL
06

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
CONSTRUCTION DETAIL OF MODEL
“PICO RECO 100”
> m³/h 80 Ø HOLE 153 mm
> m³/h 50 Ø HOLE 128 mm
MAX
POWER
1,4 W
MAX
POWER
3,6 W
MAX
POWER
2,3 W
MAX
POWER
8,4 W
100 > m³/h 93
Ø HOLE 204 mm
> m³/h 32 Ø HOLE 103 mm
ATTRACTIVE
FRONT PANEL
LED INDICATOR
FUNCTION SETTING
3-SPEED MOTOR
HIGH-EFFICIENCY CROSS-FLOW
HEAT EXCHANGER
EXTRASLIM
GRILLE
EXTERNAL GRILLE
07

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
THE DEVICE WORKS FOR 70 SECONDS IN
EXTRACTION MODE AND 70 SECONDS IN
AERATION MODE, WITH THE OPTION TO
REGULATE THE THREE SPEEDS. IN THE CASE
OF THE RECOVERY UNIT MODEL PICO RECO
100. THE FANS OPERATE SIMULTANEOUSLY.
(EXTRACTION AND AERATION)
THE DEVICE WORKS IN INTERNAL AIR
EXTRACTION MODE ONLY, WITH THE OPTION TO
REGULATE THE THREE SPEEDS.
THE DEVICE WORKS IN AERATION MODE
ONLY, TAKING IN AIR FROM OUTSIDE AND
INTRODUCING IT INTO THE ROOM. OPTION TO
REGULATE THE THREE SPEEDS PROVIDED.
THE DEVICE IS ON STANDBY.
WHEN THE AIR IN THE ROOM EXCEEDS
THE HUMIDITY LEVEL, THAT CAN BE SET AT
40%, 50% OR 60%, THE DEVICE GOES ONTO
RECOVERY MODE UNTIL THE HUMIDITY
RECOVERS ACCORDING TO THE SET VALUE.
THE DEVICE IS ON STANDBY. WHEN THE AIR
IN THE ROOM EXCEEDS THE HUMIDITY LEVEL,
THAT CAN BE SET AT 40%, 50% OR 60%, THE
DEVICE GOES ONTO EXTRACTION ONLY
MODE UNTIL THE HUMIDITY LEVEL RECOVERS
ACCORDING TO THE SET VALUE.
EXTRACTION (LED: green)
AERATION (LED: purple)
AUTO1 (LED: yellow)
AUTO2 (LED: white)
REGENERATOR (LED: light blue)
70 sec.
70 sec.
AUTO1
AUTO2
OPERATING MODES
N.B. Every operation mode of the PICO corresponds to a different colour
of the LED on the front cover.
08

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
THE SYSTEM IS ON STANDBY. IF THE EXTERNAL
TEMPERATURE IS LOWER THAN THE INTERNAL
ONE, THE HEAT RECOVERY UNIT GOES ONTO
HIGH-SPEED INTAKE. WHEN THE TEMPERATURE
RECOVERS ITS VALUE THE UNIT GOES BACK
ONTO STANDBY.
AUTO3 - SUMMER COMFORT (LED: orange)
THE SYSTEM IS ON STANDBY. IF THE
EXTERNAL TEMPERATURE IS HIGHER THAN
THE INTERNAL ONE, THE HEAT RECOVERY UNIT
GOES ONTO HIGH-SPEED INTAKE. WHEN THE
TEMPERATURE RECOVERS ITS VALUE THE UNIT
GOES BACK ONTO STANDBY.
THE SYSTEM IS ON STANDBY. WHEN THE CO2
THRESHOLD IS EXCEEDED THE HEAT RECOVERY
UNIT GOES ONTO HIGH-SPEED RECOVERY.
WHEN THE CO2 VALUE RECOVERS THE UNIT
GOES BACK ONTO STANDBY.
THE SYSTEM IS ON STANDBY. WHEN THE CO2
THRESHOLD IS EXCEEDED THE HEAT RECOVERY
UNIT GOES ONTO HIGH-SPEED OUTPUT. WHEN
THE CO2 VALUE RECOVERS THE UNIT GOES
BACK ONTO STANDBY.
AUTO4 - WINTER COMFORT (LED: pink)
AUTO5 (LED: blue)
AUTO6 (LED: dark blue)
70 sec.
THE RED FLASHING LED INDICATES THE NEED TO PERFORM THE MAINTENANCE OF FILTERS AND
THE HEAT EXCHANGER.
WHEN THE BLUE LED TURNS ON, IT INDICATES THE ACCESS TO THE HUMIDITY VALUE SETTINGS
MODE. IT IS POSSIBLE TO SET THE HUMIDITY THRESHOLD TO THREE DIFFERENT VALUES 40%, 50%
O 60%
FILTER MAINTENANCE
SETTING THE HUMIDITY VALUE
AUTO6
AUTO3
AUTO4
AUTO5
09

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
FUNCTION
To set the value of the desired humidity (40%, 50% or 60%) proceed as follows:
• Using remote control, select AUTO 1 mode 1 (yellow LED) or AUTO 2 (white
LED).
• Press the "ON" key.
• The colour of the LED changes from yellow (or white) to blue.
• Use the keys for changing the speed of the fans to select the
desired humidity value. Key for minimum speed 40% humidity, key for
medium speed 50% humidity, key for maximum speed 60% humidity
• By selecting the desired humidity value, the colour of the LED will change from blue to
yellow (or white) and you will notice the following:
• Selected value 60% (key for maximum speed), the LED changes from blue to yellow
(or white) and you will see 3 ashes and hear an audible signal. When this operation is
completed, the yellow (or white) LED will remain xed to conrm that the humidity value
SETTING THE HUMIDITY VALUE
DESCRIPTION REGENERATOR EXTRACTION AERATION SETTING
HUMIDITY VALUE WI-FI AUTO 1 AUTO 2 AUTO 3 AUTO 4 AUTO 5 AUTO 6 INSTRUCTIONS
FILTER
MAINTENANCE
"PICO HP2 30 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO HP2 55 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO HP2 80 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO HP2 30 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO HP2 55 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO HP2 80 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO HP2 30 WI-C COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO HP2 55 WI-C" COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO HP2 80 WI-C" COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO HP2 30 WI-C" COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO HP2 55 WI-C" COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO HP2 80 WI-C" COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO HP2 30 WI-C-CO2 COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 55 WI-C-CO2 COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 80 WI-C-CO2 COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 30 WI-C-CO2 COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 55 WI-C-CO2 COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 80 WI-C-CO2 COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
"PICO RECO 100 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO RECO 100 WI-C COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO RECO 100 WI-C-CO2" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO RECO 100 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO RECO 100 WI-C COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO RECO 100 WI-C-CO2" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
10

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
DESCRIPTION REGENERATOR EXTRACTION AERATION SETTING
HUMIDITY VALUE WI-FI AUTO 1 AUTO 2 AUTO 3 AUTO 4 AUTO 5 AUTO 6 INSTRUCTIONS
FILTER
MAINTENANCE
"PICO HP2 30 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO HP2 55 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO HP2 80 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO HP2 30 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO HP2 55 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO HP2 80 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO HP2 30 WI-C COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO HP2 55 WI-C" COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO HP2 80 WI-C" COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO HP2 30 WI-C" COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO HP2 55 WI-C" COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO HP2 80 WI-C" COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO HP2 30 WI-C-CO2 COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 55 WI-C-CO2 COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 80 WI-C-CO2 COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 30 WI-C-CO2 COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 55 WI-C-CO2 COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
"PICO HP2 80 WI-C-CO2 COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
"PICO RECO 100 WI" WITH EXTERNAL POWER SUPPLY X X X X X X X X
"PICO RECO 100 WI-C COMFORT" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X
"PICO RECO 100 WI-C-CO2" WITH EXTERNAL POWER SUPPLY X X X X X X X X X X X X
"PICO RECO 100 WI" WITH BUILT-IN POWER SUPPLY X X X X X X X X
"PICO RECO 100 WI-C COMFORT" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X
"PICO RECO 100 WI-C-CO2" WITH BUILT-IN POWER SUPPLY X X X X X X X X X X X X
you selected has been set correctly.
• Selected value 50% (key for medium speed), the LED changes from blue to yellow
(or white) and you will see 2 ashes and hear an audible signal. When this operation is
completed, the yellow (or white) LED will remain xed to conrm that the humidity value
you selected has been set correctly.
• Selected value 40% (key for minimum speed), the LED changes from blue to yellow
(or white) and you will see 1 ash and hear an audible signal. When this operation is
completed, the yellow (or white) LED will remain xed to conrm that the humidity value
you selected has been set correctly.
N.B: The factory setting for the humidity value is 40%
11

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
ON
MODE
OFF
AUTO3
AUTO4 AUTO5
AUTO6
AUTO1
AUTO2
RECOVERY UNIT
The device works for 70 seconds in
extraction mode and 70 seconds
in aeration mode, with the option
to regulate the three speeds.
In the case of the heat exchanger
model Pico Reco 100, the fans
operate simultaneously (extraction
and aeration).
EXTRACTION
The device works in internal air
extraction mode only with the
option to regulate the three
speeds.
RESET FILTER MAINTENANCE
Press and hold for 3 seconds
Change mode
Change speed
AERATION
The device works in aeration
mode only, taking in external
air and introducing it into the
room. Option to regulate the
three speeds provided.
AUTO 3
SUMMER COMFORT MODE
The system is on standby. When
the external temperature is lower
than the internal one, the heat
recovery unit goes onto high-
speed output mode. When the
temperature recovers its value the
unit goes back onto standby.
AUTO 2
The device is in standby. When the air
in the room exceeds the threshold
of settable humidity at 40%, 50%
or 60%, the device switches to
extraction only mode until the
humidity level falls within the set
values.
AUTO 6
The system is on standby. When
the CO2 threshold of 800 ppmv is
exceeded, the heat recovery unit
goes onto high-speed recovery
mode. When the CO2 value recovers
the unit goes back onto standby.
AUTO 5
The system is on standby. When
the Co2 threshold of 800 ppmv is
exceeded, the heat recovery unit
goes onto high-speed output.
When the Co2 value recovers the unit
goes back onto standby.
AUTO 4
WINTER COMFORT MODE
The system is on standby. When
the external temperature is
higher than the internal one, the
heat recovery unit goes onto
high-speed output mode. When
the temperature recovers its value
the unit goes back onto standby.
AUTO 1
The device is in standby. When
the air in the room exceeds the
threshold of settable humidity
at 40%, 50% or 60%, the device
switches to recovery only mode
until the humidity level falls within
the set values.
USE OF REMOTE CONTROL
Fan OFF
Fan ON
Maximum speed
(Humidity value 60%)
Medium speed
(Humidity value 50%)
Low speed
(Humidity value 40%)
Humidity value
setting
The remote control on the picture is used for PICO HP2 / RECO100 mod. WI - C - CO2.
12

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
PICO WI PICO WI-C PICO WI-C-CO2
WI-FI COMFORT CO2
WI-FI COMFORTWI-FI
USE WITH SMARTPHONE / TABLET
SCREENS WITH BUTTONS PRESENT FOR THE DIFFERENT MODELS
RECOVERY UNIT EXTRACTION AERATION
HUMIDITY / AUTO 1 HUMIDITY / AUTO 2
COMFORT CO2 - PURE AIR
FILTER
MAINTENANCE
RECOVERY UNIT EXTRACTION AERATION
HUMIDITY / AUTO 1 HUMIDITY / AUTO 2
COMFORT CO2 - PURE AIR
FILTER
MAINTENANCE
COMFORT COMFORT CO2 - PURE AIR CO2 - PURE AIR
ILLUSTRATION OF COLOUR ICON OFF
40% 50% 60% 40% 50% 60%
ILLUSTRATION OF COLOUR ICON ON NOTE
These are only illustrative
screens that provide a general
panoramic view of the colours.
Multiple functions cannot be
activated simultaneously.
Regeneration Air
RECOVERY UNIT EXTRACTION AERATION
HUMIDITY / AUTO 1 HUMIDITY / AUTO 2
PICO RECO 100 WI
FILTER
MAINTENANCE
RECOVERY UNIT EXTRACTION AERATION
HUMIDITY / AUTO 1 HUMIDITY / AUTO 2
COMFORT
PICO RECO 100 WI-C
FILTER
MAINTENANCE
RECOVERY UNIT EXTRACTION AERATION
HUMIDITY / AUTO 1 HUMIDITY / AUTO 2
COMFORT CO2
PICO RECO 100 WI-C-C02
FILTER
MAINTENANCE
13

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
CONNECTION OPERATIONS BY MEANS OF WI-FI
TO THE “PICO” EQUIPPED WITH RADIO MODULE
Regeneration Air
To access PICO.
It is sufcient to connect PICO to an electric source
and it will turn on (see image 1) automatically
in recovery mode.
(blue led light)
Access the smartphone conguration and
activation of the WI-FI function.
14:11 | Gio 21 Marzo
At the end of the search for active WI-FI
networks, the conrmation will be displayed at
the side.
Activate the PICO connection by means of WI-
FI, the conrmation will be displayed
at the side.
Search the IP address 192.168.1.1
using a search engine (for ex. Chrome)
14

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
At the end of this search the main control screen
will be displayed.
This screen can be added to the telephone’s “home
screen.” The icon shown below will be present:
Using this method it will not be necessary in the future
to search for the IP address on google to connect the
PICO.
Regeneration Air
To mount the recovery unit, make a circular hole through the wall that is big enough to allow
insertion of the tube supplied for the various recovery unit models.
NOTE:
for diameters of the external tube, please refer to page 4 for the recovery units mod. “PICO HP2”
and page 5 for the recovery unit mod. “PICO RECO 100”
WARNING!
THE RECOVERY UNIT SHOULD NOT BE INSTALLED IN
PLACES WHERE THE AIR DUCT MIGHT BE BLOCKED BY
BLINDS AND SHUTTERS, ETC. IN ORDER TO PREVENT
THE ACCUMULATION OR DEPOSIT OF DUST. MOREOVER,
THE BLINDS MIGHT OBSTRUCT THE NORMAL AIR FLOW IN
THE ROOM, MAKING THE OPERATION OF THE RECOVERY
UNIT INEFFICIENT.
WARNING!
DO NOT PLACE THE DEVICE ABOVE DELICATE FURNITURE
OR PICTURES. DO NOT PLACE THE DEVICE ABOVE OR
NEAR ROOM THERMOSTATS.
WARNINGS FOR THE ASSEMBLY
RECOVERY UNIT EXTRACTION AERATION
HUMIDITY / AUTO 1 HUMIDITY / AUTO 2
COMFORT CO2
PICO RECO 100 WI-C-C02
FILTER
MAINTENANCE
15

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
1) Install the duct in the wall, with a 1° inclination towards the outside. The air duct must
Be ush with the internal wall and should protrude from the external wall for 5 mm (only PICO
RECO 100 model).
Prepare a circular hole positioned as shown in the
adjacent gure
5 mm
1°
Ø 103-128-153 - 204
MOUNTING RECOVERY UNITS “PICO HP2 / PICO RECO 100”
2) Prepare the power cable (see pic.1) taking care to route it, either from
the right or left, in the upper part of the duct in correspondence with the duct hole.
The mains can be laid out by means of a buried electrical sheath or an adequate electrical
channel which will contain the power cord.
The cord complete with plug must protrude from the wall for approximately 10 cm.
3) Insert the circular duct in the hole made in the wall. Fill the spaces between the wall and the
duct with silicone, foam or other suitable material. The air duct must be placed wired to the
internal wall.
pic.1
A
B
C
INSIDE OUTSIDE
LEGEND:
A: Circular wall duct
B: Wall mount fastening ring
C: Through holes for
power supply
16

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
4) Align the ring to the wall with the air duct (see pic. 2)
5) Fix the ring making four holes in the wall and using the four 4x30 screws and the four
dowels included in the supply. (see pic. 3)
pic.2
pic.3
6) Insert the elements consisting of the ceramic exchanger and the lters (in the case of mod.
“PICO HP2”) and the ll media in polyester and the fans in the case of the recovery unit “PICO
RECO 100”.
7) Attach the fan unit to the wall ring
PICO WI HP2
PICO WI RECO 100
Air duct
Wall ring
17

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
pic.1 pic.2
1 Remove the external grille in order to gain access to the xing holes..
Remove the upper part of the external ventilation grille. (see pic. 1)
MODEL
DIMENSIONS (mm)
B H L L1 L2 DIAMETER (D)
PICO WI HP2 30 154 110 15 45 87 100 1,2
PICO WI HP2 55 186 142 15 45 101 125 1,2
PICO WI HP2 80 186 142 15 50 101 150 1,2
ASSEMBLY OF THE RECOVERY UNIT INTAKE GRILLE
2Insert the wall plugs provided in the holes.
pic.1
Grey front part
Grey back part
External grille mounted
18

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
3 Mark the xing holes for the external ventilation grille and drill.
For the sake of convenience, use the back part of the grille.(see pic.2)
pic.2
4Fix the back part of the grille to the wall with 4x30 screws included. (see pic. 3)
pic.3
5 Assemble the upper part of the grille. (see pic. 4)
pic.4
19

Accessories for
Air Conditioning
Ventilation
Solutions
Air Curtains and
Accessories
Accessories
For Heating
Instruments &
Tools
Multi - Zone
Air Control System
1 Mark the xing holes for the external ventilation grille and drill, inserting
the wall plugs provided.
ASSEMBLY OF THE INTAKE GRILLE
RECOVERY UNITS MODEL “PICO RECO 100”
2Fix the rear part of the grille to the wall with the 4x30 included (see pic.5), making sure
the partition for the 2 air ows is ush with the inside of the grille.
pic.5
20