TECO TVS32CVUVAH User manual

INVERTER VERTICAL SKINNY
WINDOW ROOM AIR CONDITIONER
Installation Instructions
Cooling Only Model:
TVS32CVUVAH
IMPORTANT NOTE:
Thank you for selecting a TECO quality Air Conditioner.
Please read this manual carefully before installing or
operating your new appliance. Make sure to keep this
manual for future reference.
The design and specifications are subject to change
without prior notice for product improvement.

CONTENTS
Precautions Before Installation
Installation Preparation Tool
Window Kit Parts Description
Window Installation Instructions
Complete Diagram
Frame Installation Method And Steps
Special Window Installation Method
Installation Method And Steps Of The
Vertical Window Room Air Conditioner
Sliding Window Stopper Installation
Dismount The Window Room Air
Conditioner
1
2
2
3
4
5
7
9
10
10

Precautions Before Installation
1. Read this manual carefully before use. Follow instructions and keep the manual for future
reference.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
3. Young children should be supervised to ensure that they do not play with the appliance.
4. The installation should be carried out by two persons.
1. The appliance is specifically manufactured for domestic use only. The appliance has not
been designed or manufactured for professional use. TECO declines all responsibility for
damage derived from improper use of the appliance.
2. Do not install it in an explosion-hazardous or corrosive environment.
3. Do not put the appliance near heat generating devices (such as stoves, fan heaters, etc.).
4. Choose a location where there is no obstruction to airflow, and the entire room can be
conditioned from it's central location.
5. Keep electronic devices such as televisions and radios away from air conditioners by at
least 1m.
Install
Location
1. Please make sure the machine is connected to properly grounded power outlet.
2. Do not use any extension cords, power boards or adapters to connect this appliance.
Extension leads do not guarantee the required safety of the appliance (e.g. danger of
overheating, this can result in fire and/or electric shock).
3. Do not damage or modify the power cord or plug. Do not tamper with, coil or twist the
power cord.
4. Do not place heavy items on the power cord or subject the power cord to heat.
5. If the power cord is damaged, it must be replaced by the authorised service agent.
6. Insert the plug firmly into the power outlet socket. If the plug is not fully inserted into the
power outlet socket, electric arcing may occur which in turn may cause fire and/or electric
shock.
7. Do not modify or alter the design of the appliance in any way.
8. Do not splash or pour water on the air conditioner. It may cause short circuit, electric shock
or damage to the air conditioner.
9. Should a malfunction occur (a smell of burning, etc.), switch off the appliance and unplug it
from the power outlet socket.
Continuing to operate a malfunctioning appliance may result in fire, electric shock, and
further malfunction. Contact your dealer or TECO Service Centre for advise.
Electrical
Safety
1. During installation, choose a suitable place that can withstand the weight of the air
conditioner without causing excessive noise and vibration.
2. Be sure that the external hot/cold air turbulence won't disturb your neighbors.
3. Do not place anything near the air outlet, which will reduce performance and increase
noise.
4. If you hear abnormal sounds whilst using the air conditioner, consult service provider.
Noise
Safety
1
NOTE: All images, illustrations and photos contained in this manual are for illustration purposes only and
may differ from your appliance.

◆Tape measure ◆Screwdriver ◆Scissors or utility knife
①Standard mounting frame
②Fix plate
②Fix plate: 2pcs,
up&down frame each 1pcs
⑦Frame fix screws: 4pcs, each
⑦Frame screws
⑧Flexible side
panel
⑨Sealed stretch
skin
⑩Slide fixing
screw
⑩Slide fixing screw: 4pcs,
each 2pcs on the inside
frame to fix slide distance.
Specfication：M4X16
Note: When accessories and parts are not in use, please keep them in a safe place.
2
③Sealing skin
④Body fixing screw: 1pcs，
fix unit and frame.
specification：M4X14
④Body fixing
screw
⑤ Machine lock
⑥Fixed side plate
11 Sealing sponge
Annex；
It can be used in places where
air leakage is possible after
installation is completed to
make it more sealed.
13 Corrugated
drainage pipe
Annex；
to drain water
14 Sliding window stopper
Annex；
It is used to secure the position of the
sliding window to better maintain the
seal between the bracket and the
window.
Installation Preparation Tool
Window Kit Parts Description
or
outdoor
indoor
2pcs screws on up&down fix
plate which used to install
frame on the window.
Specfication：M4X30
②Fix plate
Annex；
It is used to install the bracket
between the window and the
screw to prevent the screw
from directly contacting the
window and causing damage to
the window.
12 Window
protection board: 2pcs

Only use standard mounting frame
1. The opening width of the
window should be more
than 46 cm.
2. The height of the window
opening must be more than
90 cm, and the maximum
cannot exceed 145 cm.
◆Window frames must have U channels
◆If there are no U channels, or windows that are difficult to install,
please find a professional tradesman to install them.
NOTE:
•The height of the standard
mounting frame should not
exceed the height of the
window frame to be installed.
•Remove any fly screens fitted to
facilitate unobstructed exhaust
air flow
(✓) (X) (X)
Window Installation Instructions
Window type:
Window size requirements:
3
46cm
90~145cm

90~145cm
46cm
Complete Diagram
Choose installation location
(1). Ensure there are no obstructions in front of the air outlet to allow the even
distribution of air throughout the room.
(2). Ensure there is no heating appliance in room when operating in cooling mode.
(3). Windows frames are fitted securely and will not cause vibration.
(4). The unit should not be directly exposed to sunlight or rain.
(5). Avoid placing the machine directly under the rain water gutter.
(5). Ensure that hot air from the back of the machine does not blow into windows of
adjacent houses.
(6). Where flammable gases do not leak.
Consider noise during installation
(1). When installing, choose a location that can withstand the weight of the air
conditioner without increasing operating noise or vibration.
(2). Choose a location so that hot/cold air and driving noise from the outdoor air outlet
of the air conditioner does not disturb the neighbors.
(3). If the outdoor air outlet of the air-cooled air conditioner is obstructed, the system
will be less efficient and the noise will increase.
(4). If you hear any abnormal sounds during use, consult your dealer.
outdoor
indoor
4

Note: After the internal frame is stretched, the upper fixing plate mounting position
should be changed corresponding to U channel thickness as per A or B above.
Frame Installation Method And Steps
Product installation location
Bracket retaining plate
Product installation location
Frame fixing screw
12 Protection board
First U channel in window
Bracket retaining plate
Remove the fixing plate ② from position a,
move and re-install it to position b according
to the illustration.
Installation window position
Open the window to begin installation (both left or right sliding windows can be accommodated).
A.If the thickness of the window frame U channel is 1-10mm, install the machine mounting frame
with the fixing plate in the original position a
(As shown in the diagonal line in the illustration).
B.If the thickness of the window frame U channel is 10-63mm, then remove and move the fixing
plate to position b, before installing machine mounting frame
(As shown in the diagonal line in the illustration).
a
b
Indoor
Indoor
Frame fixing screw
12 Protection board
First U channel in window
5

Note: Standard mounting frame ① When installing, it is necessary to cover the entire
height of the window frame.
①Standard
mounting frame
⑧Internal frame
1
2
3
4
5
⑩Slide
fixing
screw
1.When the standard mounting frame is placed on the window, the bracket fixing plate of the
mounting frame is installed in the first U channel of the window frame(see the installation
window position diagram).
2.To increase the height of the standard mounting frame, stretch the inner frame ⑧ upward
to ensure that the bracket fixing plate at the top of the mounting frame is installed in the
first U channel of the upper window frame.
3.Push the standard mounting frame to one side of the window frame and install.
4.On the inner side of the mounting frame, there are two slide fixing screws ⑩ on each side.
After confirming the extension height of the mounting frame, use a Phillips screwdriver to
fasten the four slide fixing screws. After the fixing is firm, put the protective plate 12 into
the gap between the top and bottom of the window frame and the fixing plate (see the
installation window position diagram), and then tighten the upper and lower frame fixing
screws to ensure that the standard mounting frame is firmly fixed to the window.
5.After the standard mounting frame is installed, slide the window towards the sealing skin of
the mounting bracket, ensure the edge of the sliding window is as close as possible to the
sealing skin, and cut the sealing sponge to suitable length to fit the height of the window
and affix to seal the gap.
Frame installation steps
6

Less than 8mm
Upper window frame
Lower window frame
Note: Due to the special shape
of the actual window, the
window may not be closed.
Window portection
plate:Install near the
edge of the window
Note: Drill pilot holes
(diameter 3.2-3.4mm)
Close to
window frame Align vertically with
dotted lines
4×20
（6 pcs）
4×20
(6 pcs)
ST4×12
（6 pcs）ST4×12（6 pcs）
OR
Note
Use sealing glue (not supplied)
between the window protection
plate and the window frame on
the underside of the window to
make it waterproof.
Note
Install the window protection
panel in a position where you can
open and close the window. Use
sealing glue (not supplied)
between the window protection
plate on the underside of the
window and the window frame to
make it waterproof.
Note
If the window cannot be closed
after proper installation, install it
on the left side.
Use sealing glue (not supplied)
between the window protection
plate on the underside of the
window and the window frame
to make it waterproof.
More than
63mm
Less than 8mm
Special Window Installation Method
1. Installation methods that require window protection panels
More than
63mm
Window protection plate
Protection
plate
Protection
plate
Sealing glue
Aluminum window Wooden window Iron window
Indoor
Outdoor Indoor
Outdoor Indoor
Outdoor
Upper window frame
Lower window frame
Top of window frame
Bottom of window frame
Wood screws Self-tapping screws
Window protection plate
Wood screws
Align this side
Window portection
plate:Install near the
edge of the window
Align vertically with
dotted lines
Window protection plate
Self-tapping screws
Window portection
plate:Install near the
edge of the window
Protection
plate
Sealing
glue
Protection
plate Protection
plate
Protection
plate
Sealing
glue
Align this side
7

Window protection plate
Fix the upper screws (2 pcs)
2. Install the standard mounting bracket to the window
protection plate
Note: Ensure that the window can be completely closed after installation without hitting
the mounting bracket.
Aluminum window Iron window
Wooden window
Indoor
Outdoor Indoor
Outdoor Indoor
Outdoor
Fix the upper screws (2 pcs) Fix the upper screws (2 pcs)
Fix the lower screws (2 pcs) Fix the lower screws (2 pcs)
Fix the lower screws (2 pcs)
Window protection plate Window protection plate
Window protection plate Window protection plate Window protection plate
8

Note: Commence installation two hours after receiving the product (Refrigerant stability)
④Body fixing screws
⑤Machine lock
Remove the Body fixing screws
from the standard mounting
frame and save it.
There are two holes in the upper part of the back of the air
conditioner. Each hole corresponds to the locking mechanism.
After the machine is placed, push the window lock and push the
machine lock ⑤ to the left to insert the machine lock into the
two holes. After engaging, push the machine lock to the right to
ensure that the round hole on the body is aligned with the screw
hole on the machine lock.
Place the base of the air conditioner
on to the fixed mounting bracket.
Ensure that the two sides of the
bottom and the black seals on the
two sides of the bracket are attached
respectively. Then ensure that the
corrugation at the bottom of the
bracket snaps into the recess of the
chassis and locks in place.
Real panel
Recessed part
Frame
Inner rubber
C
C
B
B
Installation Method And Steps Of The Vertical
Window Room Air Conditioner
A
left
right
9

④Body fixing screws
After the window room air conditioner is
installed on the mounting frame, use a Phillips
screwdriver to fix the Body fixing screw to the
top of chassis as shown in the figure to ensure
that the air conditioner and the bracket are
firmly fixed. Upon completion, double check the
air conditioner to ensure it is completely safe.
Note: If the body is not completely secured,
please check the problem and adjust accordingly
D
Window
After the air conditioner is installed, install the sliding
window stopper at the end of the sliding window
channel, and turn the knob to lock the stopper firmly
against the window to secure the sliding window.
When dismounting the air conditioner, please work in
reverse order of the vertical window air conditioner
installation method and steps. Note that after
removing the Body fixing screw ④ from the chassis,
please hold on to the machine first, and then push the
machine lock ⑤ to the left to prevent the machine
from falling and causing damage and injury.
Sliding Window Stopper Installation
Dismount The Window Room Air Conditioner
25-42mm
window
window channel
machine
window
Indoor
Note: Depending on the window type, if the air conditioner is not been used for a long period
of time, the outside sliding window may be moved across the back of the air conditioner
and the inside sliding window can be opened or closed as desired.
10