TEFAL DR50 Series User manual

www.tefal.com
H A N D H E L D F A B R I C S T E A M E R
EN
TR
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page1

2
"Click""Click"
2
1
3
4
5
6
7
8
Fig.1 Fig.2 Fig.3 Fig.4
Fig.5 Fig.6 Fig.7 Fig.8
Fig.9 Fig.10 Fig.11
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page2

When using your appliance,
basic precautions should always
be followed, including the follo-
wing:
Read all instructions before
using this product.
To reduce the risk of contact with
hot water emitting from steam
vents, check appliance before
each use by holding it away from
body and operating.
Use appliance for its intended
use only.
This product has been designed
for domestic use only. Any com-
mercial use, inappropriate use or
failure to comply with the ins-
tructions, the manufacturer
accepts no responsibility and the
guarantee will not apply.
To protect against a risk of elec-
tric shock, do not immerse the
appliance in water or other
liquids.
Do not direct steam at people,
animals or iron clothes while
they are being worn.
Never pull on the cord to unplug
from outlet, instead grasp plug
and pull to disconnect.
Always unplug appliance from
electrical outlet when filling with
water, emptying or when not in
use.
Do not operate appliance with a
damaged cord or if appliance has
been dropped or damaged.
To avoid the risk of electric
shock, do not disassemble or
attempt to repair the appliance.
Take it to the nearest authorized
Rowenta approved service cen-
ter for examination and repair.
Incorrect reassembly can cause a
risk of electric shock when the
appliance is used.
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and know-
ledge, unless they have been
given supervision or instruction
concerning use of the appliance
by a person responsible for their
safety. Children should be super-
vised to ensure that they do not
play with the appliance.
Do not leave appliance un-atten-
ded while plugged in or while it
is still hot.
Burns could occur from touching
hot metal parts, hot water or
steam. Use care when you empty
a steam appliance. There may be
hot water in the reservoir.
The use of other accessory
attachments than those provided
by Rowenta is not recommended
and may result in fire, electric
shock or personal injury.
3
IMPORTANT SAFETY INSTRUCTIONS EN
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page3

Before use
Please read the instructions for
use and Important Safeguards
carefully.
•Remove any packaging from
the appliance.
•Do not plug in or turn on until
assembly is complete.
•Set the voltage to the correct
position as advised hereafter.
•Remove the lint pad by pulling it
to the bottom - fig.1.
Dual voltage
The appliance can work on both,
120V or 230V, AC systems. Be
sure the dual voltage selector is
in the correct voltage position
before plugging in. To do this,
switch the selector which is
above the handle to the right
position - fig.2.
This is a 230V dual voltage
appliance. An adapter plug may
be necessary when using
appliance in the United States. If
needed, plug the steambrush into
correct adapter plug for the
specific country and plug
assembly into electrical outlet.
Filling with water
• Your steam brush has been
designed to operate using
untreated tap water. If your water
is very hard (check with your local
water authority) it is possible to
mix tap water with store-bought
distilled or demineralised water
in the following proportions:
-50% untreated tap water,
-50% distilled or demineralised
water.
1. Voltage selector
(120/230V)
2. Lint pad
3. Fabric brush
4. Steam control dial
5. Steam indicator / Steam
button
6. Removable water tank
7. Storage hook
8. Electrical cord
DESCRIPTION
It is normal for a small
amount of smoke to be
produced the first time the
appliance is used. This will
quickly disappear.
Warning! Never switch
selector while unit is plugged
in.
Warning ! Never use 100%,
distilled or demineralised
water as this can cause the
appliance to spit and leak.
Important: Heat concentrates
the elements contained in
water during evaporation.
4
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page4

•Remove the water tank by
pushing it backwards - fig.3.
•Remove the stopper.
•Fill the watertank to the top
with water fig.4 and close it
securly. Make sure that the
stopper is properly pushed in
place - fig.5.
•Put the tank into the handle
until it snaps in - fig.6.
•Completely unwind the power
cord. Plug in your steam brush.
Use
•Once the appliance is plugged
in, the light is on. Set the steam
control dial to the desired setting
- fig.7.
•After approximately 30 seconds,
and when the light is off, it has
reached working temperature.
•To begin steaming, press the
steam button with the steam-
brush facing away from you,
holding it in a vertical position -
fig.8.
Steam setting
Set the brush steam output to the
type of fabric to be ironed - see
following table.
Type of fabric Setting
steam
Cotton / Linen
Silk / Wool
Synthetics
max.
min.
Tips: Check the fabric’s label for
recommendations. We recom-
mend that you test acrylic,
nylon or other synthetic fabrics
in an inconspicuous area to
ensure these fabrics are not
damaged by hot steam.
The types of water listed
below may contain organic
waste, mineral or chemical
elements that can cause
spitting, brown staining, or
premature wear of the
appliance: water from clothes
dryers, scented or softened
water, water from
refrigerators, batteries, air
conditioners, rain water,
boiled, filtered or bottled
water. Also use distilled or
demineralised water only as
advised above.
During use or while unit is
heating or cooling, do not rest
appliance on its head. Place
product on its side on a stable,
heat resistant, flat surface, as
the head will be hot. As the
appliance heats, the housing
becomes warm. This is
normal.
Do not allow steambrush to
run dry.
5
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page5

6
Steaming clothes
The Ultra Steam is equipped with
a clothes brush
•To attach the accessory, line it
up with the steam head. It locks
into position with an audible
click - fig.9.
•Simply pull on the top of the
clothes brush to remove it. You
can operate the unit with or
without the accessory.
•Hang the creased article of
clothing on a clothes hanger
•Pull the clothing tight with one
hand and place the appliance
over the creased area,
beginning at the top of the
garment.
•Gently press the fabric brush
against the clothing and move
the steambrush down the fabric.
Keep pressing the burst of
steam button- fig.10.
•The combination of steam and
brush will gently remove the
creases.
•After treatment, let the garment
cool down on the hanger before
wearing.
Lint pad
Threads, lint and hair can easily be
removed with the lint pad by
brushing the clothes slowly from
left to right.
The pad can be cleaned by
brushing in the opposite direction
right to left on a piece of old cloth.
Test fabric for color fastness
in an unobtrusive part of the
garment (inner seam). Do not
touch silk or velvet with
steam head. Some articles
can be steamed better from
inside. Heavier fabrics may
require repeated steaming.
Exercise caution at all times.
For very delicate fabrics, you
can remove the brush. To
avoid damage to clothes,
keep a distance of 1,5 inches
between the steam head and
the fabrics. We recommend
that before the first use or
after the appliance has been
stored for some time to test
the burst of steam on an old
cloth.
Before removing or attaching
the steam brush, unplug your
appliance and let it cool down.
The lint pad must not be used
when attached to appliance.
As steam is very hot: never
attempt to remove creases
from a garment while it is
being worn, always hang
garments on a clothes hanger.
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page6

•Remove the lint pad from the
steam brush by pulling it to the
bottom.
•For storage, attach the lint pad
to the steam brush by lining up
the slots of the brush with the
slots of the lint pad. Gently push
the top of the lint pad into place
until it snaps in - fig.11.
After use
•Unplug the appliance. Empty
the water remaining in the tank
and leave unit on its side to
cool.
After the appliance has cooled
down, it may be stored in the bag
provided (depending on model).
7
Warning: never touch the steam
head until it cools completely.
Warning: never forget to
unplug the steam brush and
empty the tank after your
working session. While not in
use, you can hang your
steambrush by its hook.
EN
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page7

8
Problems Possible
causes Solutions
There is no steam. The steamer is not
plugged in.
Check that your appliance is
correctly plugged in.
The water level is too
low. Unplug your appliance and refill it.
The steam button
has not been primed.
Press the steam button
continuously for a few seconds to
begin steaming.
You use the
appliance for the first
time.
When the appliance is new, press
the steam button a few times.
The water tank is not
in place.
Ensure that the water tank snaps
in when put into place.
The appliance does
not heat.
It is not plugged in. Plug in your appliance.
Water leaks or spits. The water tank is not
in place.
Be sure that the water tank snaps
when put into place.
Your appliance is not
hot enough.
Allow your steam brush to heat
for approximately 30 seconds
before using.
The dual voltage is
not set correctly
Ensure that the dual voltage
selector is in correct voltage
position before operating. Unplug
the appliance and switch the
selector to the correct voltage.
There is not enough
power or too much.
The dual voltage is
not set correctly.
Ensure that the dual voltage
selector is in correct voltage
position before operating. Unplug
the appliance and switch the
selector to the correct voltage.
IS THERE A PROBLEM ?
Environment protection first !
Your appliance contains valuable materials
which can be recovered or recycled.
‹Leave it at a civic waste disposal centre.
For any product problems or queries, please visit our website -
www.rowenta.co.uk
or contact our Helpline on 0845 602 1454 - UK [phone] - Ireland
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page8

9
Cihaz kullanımın a aşağı aki temel
önlemler her zaman uygulanmalı ır:
Bu ürünü kullanma an önce bütün
talimatları okuyun.
Buhar eliklerin en çıkan sıcak suyla
temas riskini azaltmak için, her
kullanım öncesin e vücu unuz an
uzak bir konum a çalıştırarak cihazı
kontrol e in.
Cihazı yalnızca ken i kullanım amacı
için kullanın.
Bu cihaz, yalnızca ev e kullanım için
tasarlanmıştır. Cihazın ticari
amaçlarla, uygunsuz veya talimatlara
uyulmaksızın kullanılması urumun a
üretici sorumluluk kabul etmez ve
garanti şartları uygulanmaz.
Elektrik çarpması riskin en korunmak
için cihazı suya ya a başka sıvılara
batırmayın.
İnsanlara ve hayvanlara buhar
yöneltmeyin ya a giyil ikleri sıra a
kıyafetleri ütülemeyin.
Fişi priz en çıkartmak için asla
kabloyu çekmeyin, bunun yerine fişi
tutun ve çekerek priz en çıkartın.
Su ol ururken, suyunu boşaltırken
veya kullanılma ığın a cihazın fişini
mutlaka priz en çekin.
Kablosu hasar görmüş, yere
üşürülmüş ya a zarar görmüş
cihazları çalıştırmayın.
Elektrik çarpması riskin en kaçınmak
için, cihazı parçalarına ayırmayın veya
tamir etmeye çalışmayın. Muayene ve
tamir için cihazı en yakın TEFAL yetkili
servisine götürün. Cihaz parçalarının
yanlış takılması, cihaz kullanılırken
elektrik çarpması riskini oğurabilir.
Bu cihaz be ensel, uyusal veya
zihinsel engeli olan ya a cihaz
hakkın a bilgisi ve eneyimi
bulunmayan kişiler (ve çocuklar)
tarafın an (bu kişilerin güvenliğin en
sorumlu birinin gözetimi veya cihaz
kullanımına ilişkin talimatları
sağlanmıyorsa) kullanılmamalı ır.
Çocukların cihazla oynamasına izin
verilmemeli ir.
Prize takılı urum aki veya hala sıcak
olan cihazları gözetimsiz bırakmayın.
Sıcak metal parçalar, sıcak su ya a
buharla temas e ilmesi halin e
yanıklar oluşabilir. Buhar cihazını
boşaltırken ikkatli olun. Su
haznesin e sıcak su olabilir.
Rowenta tarafın an temin e ilmemiş
olan aksesuarların kullanılması
önerilmez ve yangın, elektrik çarpması
ya a yaralanmalara ne en olabilir.
ÖNEMLİGÜVENLİK TALİMATLARI
TR
1. Voltaj seçicisi (120/230V)
2. Tiftik pe i
3. Kumaş fırçası
4. Buhar kontrol ka ranı
5. Buhar göstergesi / Buhar
üğmesi
6. Çıkarılabilir su haznesi
7. Saklama askısı
8. Elektrik kablosu
AÇIKLAMA
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page9

Kullanma an önce
Lütfen kullanım talimatlarını ve
Önemli Te birler bölümünü ik-
katlice
okuyun.
• Cihazı paketin en çıkarın.
• Kurulum tamamlanana ka ar
cihazı prize bağlamayın ya a
çalıştırmayın.
• Bura a öneril iği üzere voltajı
oğru konuma ayarlayın.
• Aşağıya oğru çekerek tiftik
pe ini çıkarın - şekil 1.
Çift voltaj
Cihaz, 120V ve 230V olmak üzere
her iki AA sistemin e e çalışabilir.
Cihazı prize bağlama an önce çift
voltaj seçicisinin oğru voltaj konu-
mun a ol uğun an emin olun.
Bunun için cihaz kolunun üstün e
bulunan seçiciyi oğru konuma
çevirin - şekil 2.
Bu, 230V çift voltajlı bir cihaz ır.
Birleşik Devletler' e kullanılan
cihazlar için priz
a aptörü gerekebilir. Gerekirse
buhar fırçasını bulun uğunuz
ülkeye uygun priz a aptörüne
taktıktan sonra cihazı prize
bağlayın.
Su ol urma
• Buhar fırçanız arıtılmamış musluk
suyuyla çalışmak üzere tasar-
lanmıştır. Suyunuz çok kireçliyse
(bölgesel su yetkilinize anışın)
musluk suyunu marketten
al ığınız amıtılmış veya minerali
gi erilmiş suyla aşağı aki oran-
lar a karıştırabilirsiniz:
- 50% arıtılmamış musluk suyu,
- 50% amıtılmış veya minerali
gi erilmiş su.
Aşağı a sıralanan su çeşitleri
akıtma, kahverengi leke
bırakma veya cihazın erken
yıpranmasına ne en olabilecek
organik kalıntı, mineral ya a
kimyasal bileşenler içerebilir:
çamaşır kurutma
makinelerin en çıkan su;
parfümlü ya a yumuşatılmış
su; buz olabın an,
bataryalar an ve klimalar an
akıtılan su; yağmur suyu;
kaynatılmış, filtrelenmiş veya
şişelenmiş su. Damıtılmış veya
10
Uyarı! Cihaz prize bağlıyken
asla seçiciyi çevirmeyin.
Cihazın ilk kullanımın a az
miktar a uman çıkması
normal ir. Bu urum hızla
orta an kalkacaktır.
Uyarı! Cihazın su akıtmasına
veya sız ırmasına yol
açabileceği için asla %100
amıtılmış veya minerali
gi erilmiş su kullanmayın.
Önemli: Buharlaşma
esnasın a su aki bileşenler
ısıyla birlikte yoğunlaşır.
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page10