Tektronix MTS400 Series User manual

xx
MTS4UP Upgrades
MTS400 Series and MTS400P MPEG Test Systems
ZZZ
Instructions
*P075097902*
075-0979-02

MTS4UP Upgrades
MTS400 Series and MTS400P MPEG Test Systems
ZZZ
Instructions
xx
Warning
The servicing instructions are for use by qualified personnel
only. To avoid personal injury, do not perform any servicing
unless you are qualified to do so. Refer to all safety summaries
prior to performing service.
www.tektronix.com
075-0979-02

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

Table of Contents
General Safety Summary .......................................................................................... ii
Service Safety Summary.......................................................................................... iv
Kit Description...................................................................................................... 1
Upgrade Kits Covered by These Instructions............................................................... 1
Minimum Tool and Equipment List ......................................................................... 3
Kit Parts Lists .................................................................................................. 4
Upgrade Instructions Overview................................................................................... 8
Option UPG Software Upgrade................................................................................... 9
Software Option Upgrade......................................................................................... 14
Hardware Upgrade (MTS400, MTS415, and MTS430)....................................................... 16
Access the Module Bay ...................................................................................... 16
MTS4UP IPTVD Upgrade................................................................................... 18
MTS4UP GBE Upgrade ..................................................................................... 21
MTS4UP CF, EP, QB2, or VS Upgrade.................................................................... 22
Replace the Cabinet .......................................................................................... 24
Restore the Operating System............................................................................... 24
Software Upgrade............................................................................................. 31
Software Key Upgrade....................................................................................... 37
Hardware Upgrade (MTS400P).................................................................................. 38
Software Upgrade............................................................................................. 38
Access the Module Bay ...................................................................................... 43
MTS4UP IPTVP Upgrade ................................................................................... 47
SFP Module Upgrade (Option LX, Option SX, or Option ZX) .............................................. 53
MTS4UP Upgrades Instructions i

General Safety Summary
General SafetySummary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
To Avoid Fire or Personal
Injury
Use proper power cord. Use only the power cord specified for this product and
certified for the country of use.
Ground theproduct. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
Power disconnect. The power cord disconnects the product from the power source.
Donotblockthepowercord;itmustremain accessible to the user at all times.
Do not operate without covers. Do not operate this product with covers or panels
removed.
Do not operate with suspected failures. If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Avoid exposed circuitry. Do not touch exposed connections and components when
power is present.
Use proper fuse. Use only the fuse type and rating specified for this product.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation. Refer to the manual's installation instructions for details
on installing the product so it has proper ventilation.
ii MTS4UP Upgrades Instructions

General Safety Summary
TermsinThisManual These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
Symbols and Terms on the
Product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read
the marking.
WARN IN G indicates an injury hazard not immediately accessible as you
read the marking.
CAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
MTS4UP Upgrades Instructions iii

Service Safety Summary
Service Safety Summary
Only qualified personnel should perform service procedures. Read this Service
Safety Summary and the General Safety Summary before performing any service
procedures.
Do Not Service Alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect Power. To avoid electric shock, switch off the instrument power, then
disconnect the power cord from the mains power.
Use Care When Servicing With Power On. Dangerous voltages or currents may
exist in this product. Disconnect power, remove battery (if applicable), and
disconnect test leads before removing protective panels, soldering, or replacing
components.
To avoid electric shock, do not touch exposed connections.
iv MTS4UP Upgrades Instructions

Kit Description
This document provides instructions for performing hardware and/or software and
option key upgrades on the following Tektronix products:
MTS400 Series MPEG Test Systems (MTS400, MTS415, and MTS430)
MTS4SA MPEG Test System
MTS400P MPEGTestSystem
Upgrade Kits Covered by These Instructions
MTS4UP UPG -This kit provides a software upgrade for your MTS4xx
systems. This upgrade is included with all of the hardware updates, or may
be ordered separately.
As the user of an MTS400 Series MPEG Test System, you will be familiar with
the software key (or dongle) that must be attached to your unit before you can
open any of the MTS400 Series applications. Two styles of software key are
available, each performs the same function: parallel port or USB (MTS4SA only).
The option key string supplied with this upgrade kit is generated using the serial
number of the software key and the list of options to be licensed.
NOTE. Only the software applications already installed on your MPEG test
system will be available after the upgrade. If additional applications are required,
contact your Tektronix representative.
MTS4UP IPTVD - This kit adds an IPTV Gigabit Ethernet interface with a
10/100/1000Base-T electrical port to your MTS400, MTS415, or MTS430
instrument. When you install the IPTV interface card you must remove any
other installed optional interface cards (options GBE, CF, EP, QB2, or VS).
There are three optical length input options available for option IPTVD:
MTS4UP LX - Adds a 1000Base-LX wavelength optical port with LC
connector (single mode 1310 nm).
MTS4UP SX - Adds a 1000Base-SX short wavelength optical port with
LC connector (multimode 850 nm).
MTS4UP ZX - Adds a 1000Base-ZX wavelength optical port with LC
connector (multimode 1550 nm).
MTS4UP Upgrades Instructions 1

Kit Description
MTS4UP GBE - This kit adds a Gigabit Ethernet interface and IP Analysis
software to your MTS400, MTS415, or MTS430 instrument (SFP required).
This kit may be combined with any of the following hardware upgrade kits.
There are also four optical length input options available with option GbE:
MTS4UP LX - Adds a 1000Base-LX wavelength optical port with LC
connector (single mode 1310 nm).
MTS4UP SX - Adds a 1000Base-SX short wavelength optical port with
LC connector (multimode 850 nm).
MTS4UP ZX - Adds a 1000Base-ZX wavelength optical port with LC
connector (multimode 1550 nm).
MTS4UP CU - adds a 1000Base-T electrical port with RJ45 connector.
MTS4UP CF - This kit adds a COFDM DVB-T interface to your MTS400,
MTS415, or MTS430 instrument. This kit may only be combined with the
MTS4UP GBE kit.
MTS4UP EP - This kit adds a QPSK/8PSK interface to your MTS400 Series
instrument. This kit may only be combined with the MTS4UP GBE kit.
MTS4UPQB2-This kit adds a QAM B interface to your MTS400 Series
instrument. This kit may only be combined with the MTS4UP GBE kit.
MTS4UP VS - This kit adds an 8VSB interface to your MTS400 Series
instrument. This kit may only be combined with the MTS4UP GBE kit.
MTS4UP IPTVP - This kit adds an IPTV Gigabit Ethernet interface with a
10/100/1000Base-T electrical port to your MTS400P.
There are three optical length input options available for option IPTVP:
MTS4UP LX - Adds a 1000Base-LX wavelength optical port with LC
connector (single mode 1310 nm).
MTS4UP SX - Adds a 1000Base-SX short wavelength optical port with
LC connector (multimode 850 nm).
MTS4UP ZX - Adds a 1000Base-ZX wavelength optical port with LC
connector (multimode 1550 nm).
2MTS4UP Upgrades Instructions