TELEPASS SAT K1 User manual
bp and Aral Tollbox:
one device
many countries
Telepass SAT
Technology ETOLLK1TL
EN
Installation manual
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
TLP-K1-Inst-
1
.
1
_
A
4
_
EN-0123 © 2023
bp and Aral Tollbox:
one device
many countries
Telepass SAT
Technology ETOLLK1TL
Highway e-toll payment device
Installation manual
Recipients and obligations
This manual is intended for authorized installers of the device
(
g
a
r
a
g
e
)
.
It contains all the instructions to install the device
safely and must be kept and accessible for the entire life of the
device.
For information on device use, please see the enclosed User
manual.
Manual data
Device: K1 Telepass SAT - model ETOLLK1TL
Title: Installation manual
Code or edition: v.
1.1
Month and year of publication: JAN 2023
Manual type: translation of the original instructions
Customer service
In the event of malfunctions or faults, directly contact the
service provider. To check that the device has been installed
correctly, see "Check the installation with the Self Test Tool".
Warranty
For further information on the warranty, please see the service
contract and contact the service provider.
Limitations
Telepass SpA cannot be held liable for the following.
!
Reimbursements for interventions under warranty, repairs or
other claims related to the product if the inspection by
Telepass SpA confirms that the parts have not been
correctly used, stored, installed and maintained, or that the
said parts have been subject to contamination, abuse,
improper use, modifications or makeshift repairs.
!
Reimbursements for direct or indirect personal or property
damages due to product use in conditions other than those
described in this manual or due to manual, print and
spelling errors or omissions.
SAFETY INFORMATION
Always read this section to work with the unit safely.
Safety messages
Warnings related to safety as envisaged in this document are
provided below:
CAUTION! Indicates a hazardous situation which, if not
avoided, may cause slight injury.
NOTICE
: indicates obligations
t
h
a
t
,
if not
ob
s
e
r
ve
d
,
may cause
damage to the
p
r
od
u
c
t
.
Important warnings
This device complies with current safety regulations. If
improperly used or installed, it can cause personal and/or
property damages. Those who work on this device must
follow good working practices for electricians.
Keep out of reach of children.
The use of the device is permitted only in the presence of
electrical protections on the vehicle.
Installation, use and maintenance warnings
Electric shock risk
The vehicle battery is live even when the vehicle is not
running!
Observe the voltage limits indicated in the technical
specifications, the vehicle manufacturer's indications and
power cable specifications.
Do not submerge in liquids. Protect the device from rain and/or
spray.
Do not allow unqualified and unauthorized personnel to open or
tamper with the device. Only contact customer service in the
event of malfunctions.
Fire risk
A damaged device can emit smoke and/or catch fire.
Do not use the device if it appears damaged.
Keep away from heat sources, flames and magnetic fields.
If smoke comes from the device, remove it, move it away from
the vehicle, and contact customer service immediately to return
it to the service provider.
Risk of contact with irritants
Irritant liquid may leak from a damaged device.
Do not use the device if it appears damaged.
If liquid leaks from the device, do not handle it with your bare
hands. Contact customer service immediately to return it to the
service provider.
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
TLP-K1-Inst-
1
.
1
_
A
4
_
EN-0123 © 2023
bp and Aral Tollbox:
one device
many countries
Intended use
The device was designed, manufactured and tested to detect
road passages through a radio and satellite system. It meets
the safety standards required by current regulations if installed
according to the instructions provided in this manual and used
according to the instructions in User manual.
NOTICE
!
Install only one device per
veh
i
c
l
e
.
Several units can cause
i
n
t
e
r
f
e
r
en
c
e
s
,
malfunctions and double toll
c
h
a
r
g
e
s
.
In this
cas
e
,
Telepass SpA cannot reimburse the extra amount
p
a
i
d
.
!
Only install the device in the position
i
n
d
i
ca
t
e
d
.
Incorrect
positioning may cause
m
a
l
f
un
c
ti
on
s
.
!
Only install the device on the vehicle for which it was
s
u
pp
l
i
e
d
.
In the event of license plate
c
h
a
n
g
e
,
contact
customer
s
e
r
v
i
c
e
.
PRODUCT KNOWLEDGE
Receipt
Upon receipt of the device, check that the packaging and all
components are in perfect condition. Contact the shipping
agent in the event of damages.
Box contents
A - K1 Telepass SAT device
B - Power cable
C - Two Velcro strips
D - Cleaning wipes
E - Vehicle declaration
F - Safety notices
A Quick Guide for using the device is found on the inside of the
packaging. Keep the packaging to be able to consult it at any
time.
Operations
This device performs e-toll payment through a radio or satellite
reading system. Where the radio system is used, the passage is
detected by antennas placed in dedicated lanes, or on gates
positioned in various points of the road network, where the free-
flow service is available. Where satellite service is used, passage
is detected by the GNSS system.
N
O
T
I
C
E
:
Never disconnect the power
ca
b
l
e
.
The device only
works if
p
o
w
e
r
e
d
.
Traveling on toll roads when the device is not
operative may result in
fi
ne
s
.
The device communicates with the user by voice and acoustic
messages.
The device must be connected to the vehicle's electrical system
according to the instructions in this manual.
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
TLP-K1-Inst-
1
.
1
_
A
4
_
EN-0123 © 2023
bp and Aral Tollbox:
one device
many countries
The Self Test Tool
The Self Test Tool (self-test-
t
oo
l
.
t
e
l
e
p
a
ss
.
c
o
m
)
is an online
resource that Telepass offers installers and allows the following
activities to be performed:
!
Download this manual.
!
Watch a video that shows how to install and monitor the
device.
!
Follow an installation and check wizard.
To use this tool, you must register with your cell phone number
and email address.
The installation wizard includes the following operations:
!
entering the ID code for the device (OBU ID) and the plate
number for the vehicle on which it is installed
!
execution of the electric connections to the vehicle and
positioning of the device in the passenger cabin
!
automatic configuration of the device
!
check the correct configuration or possible error notification
It is mandatory to follow the wizard on the Self Test Tool
before departing. If not successful, you will not be able to
use the device.
If the installation and configuration of the device are not
correct, it is impossible to travel on any toll roads.
Device structure
A - Status LED (red/green)
B - Function/confirmation button
C - Adjustment buttons (+/-)
D - Communication LED (red/yellow/green)
E - Microphone (not used)
F - Configuration button (not used)
G - Speaker
H - Power inlet
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
TLP-K1-Inst-
1
.
1
_
A
4
_
EN-0123 © 2023
bp and Aral Tollbox:
one device
many countries
DEVICE INSTALLATION
Position on the windshield
Position the device on the windshield
1.
Clean the application
area on the
windshield carefully,
using a multipurpose
detergent.
2.
Remove the
protective film from
the sticker.
Install in the windshield area as indicated below:
-
within a 20 cm band, 10 cm over the idle windshield wiper line
-
between the windshield median line and center of the steering
wheel.
To identify the shielded windshield zones, please refer to the
vehicle documentation.
N
O
T
I
C
E
:
make sure that the device does not interfere with the
driver's field of vision when driving and that it is not within the
a
i
r
b
a
g
’
s
range of
ac
t
i
o
n
.
Installation warnings
N
O
T
I
C
E
:
!
The fixed installation of the device can only be performed at
authorized workshops by suitably qualified
p
e
r
s
onn
e
l
.
!
Comply with the power cable
s
p
e
c
ifi
c
a
t
i
on
s
,
the device
power limits and the vehicle manufacturer's
i
n
s
t
r
u
c
ti
on
s
.
!
To ensure the Velcro strip
a
d
he
s
i
o
n
,
install the unit when the
ambient temperature is between 20 °C and 40
°
C
.
!
Before installing the
de
v
i
c
e
,
check that all data included in
the vehicle declaration are
c
o
rr
e
c
t
.
O
t
he
r
w
i
s
e
,
ask the
vehicle's owner for an updated
d
e
c
l
a
r
a
t
i
on
.
!
Make sure that device installation does not inhibit the
correct operations of the vehicle and electrical devices
connected to the electrical system
(
e
.
g
.
t
a
c
h
o
g
r
a
p
h
s
,
e
t
c
.
)
!
Make sure that the power cable is not subject to
m
e
c
h
a
n
i
ca
l
,
heat or chemical stress and does not hinder the driver when
d
r
i
v
i
n
g
.
Required material
Two 3 A fuses and relevant fuse boxes.
3.
Place the device
horizontally on the
clean windshield.
4.
Check for air bubbles
in the adhesive area.
Press firmly the device
against the
windshield.
5.
Press the connector
fully into the power
socket.
NO
T
I
C
E
:
make sure that the power cable is not subject to
m
e
c
h
a
n
i
ca
l
,
thermal or chemical
s
t
r
e
ss
.
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
TLP-K1-Inst-
1
.
1
_
A
4
_
EN-0123 © 2023
bp and Aral Tollbox:
one device
many countries
Connect the device to the electrical system
Connect the three wires according to the following diagram.
CAUTION!
Only use the cable supplied. DO NOT use third-party
cables or adapters.
Do not make any different connections (for ex.
connections with
1
or 2 w
i
r
e
s
)
.
This would compromise the
operation of the device and can cause fines.
DO NOT short-circuit the three wires.
Comply with the cable specifications and the vehicle
manufacturer's instructions.
Make sure that the fuses are easy to access and
replaceable.
DO NOT connect the device to the electronic control units
(
E
C
U
)
.
Check the connections
Check the installation with the Self Test Tool
Before using the device for travel, it is necessary to check that it
has been installed and configured correctly. Proceed as follows:
1.
Connect to the installation portal at self-test-tool-
telepass.com.
2.
If you are already registered, enter your username and
password.
3.
If you have not registered yet, enter your cell phone
number and email address, then follow the wizard.
4.
If useful, download the manual and watch the video that
describes how to install and monitor the device.
5.
Follow the wizard to install the device. In this procedure, it
is necessary to enter the device ID code (OBU ID) and the
plate number for the vehicle on which it is installed: the
device is configured automatically.
At the end of the procedure, a correct configuration notification
is sent. In the event of an error, repeat the wizard.
Do not use the device for e-tolls until configuration has been
completed correctly.
Configure the device
Before using, the e-toll device must be set up and the number
of axles and vehicle weight must be set. Please refer to User
manual.
1.
Check that the connector is firmly inserted in the power
supply socket.
2.
Switch on the panel: the green LED status light will switch
on. If there is a fault, the red LED status light will flash or
remain on.
3.
Switch off the panel: the green LED status light flashes
three times and then switches off.
For further information on the LEDs and any messages, see the
enclosed User manual.
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
TLP-K1-Inst-
1
.
1
_
A
4
_
EN-0123 © 2023
bp and Aral Tollbox:
one device
many countries
MAINTENANCE AND DISPOSAL
Cleaning
Use a soft cloth, dampened with a
multipurpose detergent to clean the unit.
N
O
T
I
C
E
:
!
Do not spray detergent directly on the
de
v
i
c
e
.
!
Do not use solvents or abrasive
m
a
t
e
r
i
a
l
s
.
Disposal liability
Never dispose of the device as standard urban
waste.
Dispose of at a local WEEE recycling center or return
to your local contact company or to Telepass SpA.
Batteries and accumulators
CAUTION! Toxic substances in the Li-Ion battery. Intoxication,
pollution and environmental damages. DO NOT remove and
dispose of the battery. Return the entire device as indicated
in the operating instructions.
CAUTION! Risk of explosion. DO NOT expose the device to high
temperatures.
TECHNICAL SPECIFICATIONS
Back label
A - Manufacturer’s name and information
B - Model name and technical data (IP rating and power
supply)
C - Device serial number and bar code for DSRC module
information
D - QR code to access the Telepass website
Other markings
Device subject to the WEEE Directive
(
2
0
1
2/
1
9
/
EU
)
.
Device nit subject to the RoHS Directive
(
2
0
11
/
65
/E
U
)
.
CE marking
Technical characteristics
Dimensions
95 x 66 x 27 mm
Weight
120
g
External material
Recyclable plastic (ABS)
Protection grade
IP 41
Working temperature
-30 °C to +70 °C
Storage temperature
5 °C to +40 °C
Power from vehicle
5 V DC - 2 A
(
m
i
n
.
)
Internal battery
Rechargeable battery (supercap) 3.9 V DC/155
mAh (@ 3.67 V) –
311
mAh (@ 3.90 V)
Residual voltage (DSRC only)
3.0 V DC - 225 mAh (cr2032)
Radio-frequency band
2G
(
GS
M
)
:
900/1800 MHz
3G
(
W
D
C
S
MA
)
:
900 MHz
LTE
(
FDD
)
:
700/800/900/1800/2600 MHz
GNSS:
11
5
1
–
1
2
1
4
/
1
2
1
5
.
6
–
1
3
50
/
1
559
–
1
6
1
0
MHz
DSRC: 5.785-5.815 GHz
Output power
2G
(
GS
M
)
:
Class
1
(30 dBm ±2 d
B
)
,
Class E2 (26
dBm ±3 d
B
)
,
Class 4 (33 dBm ±2 d
B
)
,
Class E2 (27
dBm ±3 dB)
3G
(
W
D
C
S
MA
)
:
Class 3 (24 dBm +1/-3 dB)
LTE
(
FDD
)
:
Class 3 (23 dBm ±2 dB)
DSRC: -14 dBm
GNSS standards
GPS, Galileo, GLONASS
Safety and approval conformity
Hereby, the manufacturer Telepass SpA declares that the
E
T
O
LL
K
1
T
L
type radio equipment is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is
available at the following Internet address:
https://www.telepass.com/en/truck/support
CE
0051-RED-0118
Approval NSAI as per UNECE R10 regulation
Other manuals for SAT K1
1
Table of contents
Other TELEPASS Automobile Accessories manuals
