1. Safety recommendations
Caution Statements
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers)
that produce heat.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit the apparatus.
10. Only use attachments/accessories specied by the
manufacturer.
11. Unplug this apparatus during lightning storms or when
unused for long periods of time.
12. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Warning
Reduce the risk of re or electric shock, do not expose this
apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and
no objects lled with liquids, such as vases, shall be placed on
the apparatus.
Safe operation
Power requirements for this product are 100-240V~ 50/60Hz.
Should any liquid or object fall into the equipment, please
refer to qualied personnel for service.
To disconnect the equipment from the mains pull the plug
never the cable.
It is strongly recommended not to connect the equipment to
the mains until all connections have been done.
The socket outlet shall be installed near the equipment and
shall be easily accessible.
Donottakethe coverothe equipmentwithout disconnecting
it from the mains.
Safe installation
Ambient temperature should not be higher than 45°C.
Do not place the equipment near heat sources or in a highly
humid environment.
Do not place the equipment in a place where it can suer
vibrations or shocks.
Please allow air circulation around the equipment.
Do not place naked ames, such as lighted candles on or near
the product.
Symbology
Equipment designed for indoor use.
This symbol indicates that the power supply of the
equipment complies with the safety requirements
for class II equipment.
Caution, risk of electrical
shock.
The present product can not be treated as normal
household waste, it must be delivered to the
corresponding collection point for waste electrical
and electronic equipment (RAEE).
The equipment contains a recyclable battery, before
the RAEE is deposited in the collection facilities, the
battery must be removed and deposited separately
for proper management.
The equipment complies with the CE mark
requiremen
ts.
